52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu
...
Adjust Nozzle Change Menu For Quick Change Nozzles
2024-04-11 19:19:01 +02:00
bc04f16906
Adjust Nozzle Change Menu For Quick Change Nozzles
...
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
2024-04-09 16:12:46 +02:00
bd935db31e
Add Eject Option To Filament Load Message
2024-04-09 15:50:17 +02:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu
...
Fix issue Insert filament ... message in French and Hungarian
2024-04-04 09:20:48 +02:00
feebac54fc
Fix issue #4424
...
Fix rebase
2024-04-04 09:08:44 +02:00
b3a410abdc
Fix #3361
2024-04-04 09:04:48 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
8d1be264e5
Thanks to @gudnimg pointing out duplicate if statements that are covered by the top-level if statement.
2024-03-27 17:44:50 +01:00
9e8aadd8af
Revert split if statements
...
Kept few as these get too long
2024-03-27 10:15:07 +01:00
52275322a2
Remove redundant check
2024-03-20 08:41:29 +01:00
9f8115639a
LCD menu
...
- Hide menus during recovering
- Un-/Load filament with FSensor active only show Load OR Unload depending on FS sate
- Host
- Reprint only shown when M79 timer is active
- Resume only shown when M79 timer active
- Stop print always shown when printing, paused and recovering
2024-03-13 17:43:00 +01:00
16aa2e7834
Hide LCD menu "Reprint" during power panic recovery
2024-03-13 17:43:00 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
727a82bb3d
Fix Stop print to send host action when host print is active
2024-02-05 08:14:10 +01:00
6682237c7a
Merge pull request #4582 from gudnimg/PFW-1552
...
PFW-1552 and PFW-1544: Fix issue with MMU unload when a print is stopped with a cold nozzle
2024-02-01 06:22:49 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
abcb1017f3
PFW-1553 fix regression where SD card file is not closed when stopping paused print
...
When a print is paused, card.sdprinting is set to false. Instead we can check
if the SD card has been mounted and try to close the file.
The closefile() method will check internally whether or not the file is open.
2024-01-27 15:21:08 +00:00
f022567239
PFW-1522 Fix an issue where MMU unloads while nozzle is cold if print is stopped
...
In the case of a Fan Error, the print is paused. If the nozzle is allowed to cool for a while before the print is stopped via the LCD, then the MMU will try to unload with a cold nozzle.
This can happen with ANY recoverable thermal errors.
In this commit I attempt to fix all scenarios. Including PFW-1544 where the nozzle is cooling down when the print has finished normally.
PFW-1544
PFW-1552
Change in memory:
Flash: +74 bytes
SRAM: 0 bytes
2024-01-27 11:54:54 +00:00
c0b76dd5cf
cleanup: move st_synchronize under the if statement
...
If the if statement is not true, then the st_synchronize call is not useful
The raise_z call above the if statement does not need it since it always calls st_synchronize (blocking move)
No change in memory
2024-01-27 10:47:23 +00:00
b80965731f
Merge pull request #4421 from gudnimg/sd-card-mount-opt
...
cleanup: Don't set root directory if SD card fails to mount + 3 renames
2024-01-22 09:11:19 +01:00
02b91dc2cb
Merge pull request #4563 from 3d-gussner/MK3_Quick_nozzle_change_menu
...
Add nozzle diameter change to main menu for REVO builds
2024-01-19 14:26:18 +01:00
13fb11889e
Minor cosmetic changes voted by community
2024-01-12 07:20:33 +01:00
adf2ecabc1
Fix pause indicator when print job timer is not used
...
Fixes #4554
Change in memory:
Flash: +50 bytes
SRAM: +1 byte
2024-01-11 19:30:30 +00:00
d5a5835059
Add nozzle change to main menu when QUICK_NOZZLE_CHANGE is defined
...
Add Nozzle diameter to Info screen when printer inactive and QUICK_NOZZLE_CHANGE defined
Solves #4488
2024-01-11 07:36:51 +01:00
8d50d29776
Merge pull request #4553 from sarusani/shutdownHostLCDEntry
...
Add Shutdown host to LCD Menu
2024-01-11 07:33:16 +01:00
f18fc2bbce
Fix Pause->Tune->Auto Home layer shift
2024-01-09 11:07:29 +01:00
59093107fd
Add #ifdef HOST_SHUTDOWN
2024-01-06 00:45:06 +01:00
49f9d7abdc
Add Shutdown host to LCD Menu
...
Add "Shutdown host" entry to LCD menu if printer is not active and host is connected.
2024-01-06 00:45:06 +01:00
db044163f9
Unify Selftest messages
2024-01-04 11:18:07 +01:00
9bd043c83b
Move restore_file_from_sd out of power panic file
...
This function is not specific to power panic. Some printer models
do not have power panic enabled.
This change fixes a build failure
No change in memory
2023-12-30 12:19:51 +00:00
ceec54f026
reprint: reduce duplicate code
...
restore_file_from_sd function now supports any
filename extension. If a print was finished (to allow reprinting) then the
EEPROM filename and extension should always be valid.
Change in memory:
Flash: -312 bytes
SRAM: 0 bytes
2023-12-30 12:06:46 +00:00
15a3fb998c
Merge pull request #4541 from sarusani/actionReadyOpt
...
Remove leading M118 from "action:ready" & "action:not_ready"
2023-12-19 15:02:09 +01:00
2c4474b1dd
Remove leading "M118"
2023-12-16 12:51:17 +01:00
e5d6d72d23
Add #ifdef
2023-12-15 14:09:46 +01:00
1407f29362
Prevent oozing after filament load
...
Retract 10mm of filament after loading
2023-12-14 14:20:46 +01:00
40786a24e0
Rename "cardOK" to "mounted"
...
Sync the Prusa firmware a little bit with Marlin 2.1
2023-12-09 10:52:26 +00:00
d94f263843
Rename initsd() to mount()
...
Sync the Prusa firmware with Marlin 2.1 a little bit.
2023-12-09 10:50:30 +00:00
18daa5a62e
Merge pull request #2423 from Panayiotis-git/MK3_M600_Issue-2415
...
LCD option to unload new filament on M600 (issue #2415 )
2023-12-04 17:03:38 +01:00
60e311d74f
Change reprint MENU_ITEM_SUBMENU_P to MENU_ITEM_FUNCTION_P
...
There's no submenu -> don't show arrow
2023-12-03 08:46:48 +01:00
4d9e084cf7
Rename lcd_reprint_usb_print to lcd_send_action_start
...
Sending action start can not only be used for reprints
2023-12-03 08:44:54 +01:00
d267140ee6
Rename reprint_from_eeprom to lcd_reprint_from_eeprom
...
It sets the lcd_return_to_status() at the end, so naming should be consistent witch the other functions
2023-12-03 08:43:16 +01:00
3da4407e4f
Repeat the M600 unload/load filament sequence - Fix translations
2023-12-01 21:13:24 +02:00
8ceda27cda
Provide option to repeat the M600 unload/load filament sequence
2023-12-01 21:12:31 +02:00
4dfc484265
Merge pull request #4207 from gudnimg/crashdet_cancel-fixup
...
`crashdet_cancel()` doesnt cleanup all variables when USB printing
2023-12-01 17:41:33 +01:00
3d-gussner
sarusani
sarusani
gudnimg
Panayiotis-git