859aa4d283
Reuse M123 during fan selftest to report RPM
...
M123 reports both fan speeds nicely in RPM, as well as the requested PWM
for each so that we don't need to show the test "number" to distinguish
between the two in the serial output.
2022-04-04 23:29:52 +02:00
7671ff37a9
Fix/optimize fan selftest
...
Rewrite the part of the fan selftest to use a shared path between hotend
and print fan.
Remove the useless 10 seconds spin-up delay for the print fan. Reduce it
to 5 seconds.
Properly wait for readings after spin-up, so that RPMs are more
reliable. Also tune the print fan threshold to a more reasonable
default. Both, in conjunction, now avoid the "swapped fan" check that
was incorrectly triggered in almost every case.
2022-04-04 21:36:02 +02:00
c62c412cc3
Remove unused setting PID_ADD_EXTRUSION_RATE
...
Even if the setting was turned on, it doesn't do anything useful.
2022-03-30 19:03:41 +01:00
1949802bea
Cleanup: remove unused FILAMENT_RUNOUT_SUPPORT define
...
FILAMENT_RUNOUT_SUPPORT has never been supported in the MK3 branch, and
contains a ton of horrible and unmaintained code that doesn't even
compile anymore.
Since this code is currently polluting a sizable block inside the G0/G1
code block, simply get rid of it.
2022-03-30 12:49:08 +02:00
4752b2b479
Disable Norwegian
2022-03-23 10:18:16 +01:00
85a5986e9e
Update `////MSG...` for `lang-add.sh`
2022-03-16 09:01:14 +01:00
7f751ae6ac
Add M201 paramters to documentation
...
Also fixed the reprap link for M201
2022-03-13 15:53:51 +00:00
8e2d44987f
Document M203 parameters
2022-03-13 15:49:38 +00:00
935458beca
Add 'E' parameter to M701 documentation
...
Remove missing 'U' parameter in M702
2022-03-13 12:04:26 +00:00
7c55cf801b
Fix additional merge issues
...
Update lang-??port.sh scripts
2022-03-12 10:51:26 +01:00
764a1fd411
Merge remote-tracking branch 'upstream/MK3_3.11.0' into MK3_3.11.0_Improve_languages2
...
Fix Swedish merge issues
2022-03-12 09:44:00 +01:00
626e5b43eb
Fix part 2 of `\04Refresh` and `Sheet...`
2022-03-11 15:37:57 +01:00
b4492067a4
Merge branch 'MK3_3.11.0' into MK3_3.11.0_Swedish
2022-03-10 14:59:46 +01:00
d6de893ac5
Fix SN compile warnings for MK2.5/S
2022-03-07 18:45:45 +01:00
45cd904520
Remove duplicate `Extruder fan:`
...
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
2022-03-07 11:47:53 +01:00
bcd2b6f8bf
Remove `Choose filament` as it is a duplicate of `Select filament`
2022-03-07 11:47:53 +01:00
879803daa9
Temp. cal. -> PINDA cal.
...
01234567890123456789
Temp. cal. [Off] old
PINDA cal. [Off] new
Temp. cal. 1/6 old
PINDA cal. 1/6 new
MSG_TEMP_CALIBRATION -> MSG_PINDA_CALIBRATION
MSG_TEMP_CALIBRATION_DONE -> MSG_PINDA_CALIBRATION_DONE
Updated text
- MSG_PINDA_CALIBRATION_DONE
- MSG_PINDA_CAL_FAILED
Update status line during PINDA cal.
Changed PINDA cal. from submenu to function
- Deleted `lcd_pinda_calibration_menu()`
- Deleted `#MSG_CALIBRATE_PINDA c=17`
Tried to update translations
Updated po files
2022-03-07 11:47:52 +01:00
7939142922
Change `Choose extruder` to `Select extruder` for consistant wording
2022-03-07 11:47:52 +01:00
81d8c72cc4
Remove duplicate `Extruder fan:`
...
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
2022-03-07 11:47:52 +01:00
4a73cad3fd
Remove `Choose filament` as it is a duplicate of `Select filament`
2022-03-07 11:47:52 +01:00
6822b65e9c
FW Crash messages will not be translated
2022-03-07 11:47:52 +01:00
d42ef4784c
Optimise checkFanSpeed()
...
Changes save 28 bytes of flash
2022-03-06 12:54:24 +00:00
851f72b059
Merge pull request #3389 from leptun/MK3_SN_GET_only_on_Einsy
...
Allow SN get only on the Einsy
2022-03-04 08:16:01 +01:00
0889b3f49e
Merge pull request #3390 from leptun/MK3_fake_SN
...
Fix Octoprint connect because of SN GET on blank einsy boards
2022-03-04 08:15:48 +01:00
e10e196982
Merge pull request #3350 from leptun/MK3_fix_SN_crash2
...
Add a uart RX timeout
2022-03-04 08:15:17 +01:00
159c4cf8ae
Reset acceleration rates when changing microstepping resolution
2022-03-03 22:25:48 +01:00
4a02ff3de8
Change SERIAL_PROTOCOL to SERIAL_PROTOCOLPGM in a few lines
...
Saves 12 bytes of SRAM but increases flash use by 12 bytes.
2022-02-28 11:37:13 +01:00
97c371e5e8
Make the "ln" functions no-inline.
...
Save 348B of flash
2022-02-27 20:58:56 +01:00
af36f654d1
Optimise a few uses of SERIAL_PROTOCOLLN
...
Saves 34 bytes of flash memory and reduces code by 8 lines.
2022-02-27 20:58:50 +01:00
bb56c35b87
Optimise PINDA cal status Serial print
...
"PINDA cal status:" is always printed no matter what cal_status is so we can pull that out of the conditional statment.
cal_status is also a boolean, lets just print it directly. Its a simpler code.
Saves 32 bytes of flash and 22 bytes of SRAM
Change serial messages to PGM
2022-02-27 20:58:46 +01:00
efde923e57
Purge ftostr3
...
Saves 54 bytes of Flash and 2 bytes of SRAM
2022-02-27 20:58:39 +01:00
8e85242c8f
Temperature selection is int16_t. Use sprintf for PID start command.
...
Saves 90B of flash and 2B of ram
2022-02-27 20:57:24 +01:00
6d98e99356
Use sprintf_P for M301 instead of ftostr32
...
Also fixed indentation of if statement
Saves 248 bytes of flash
2022-02-27 20:57:24 +01:00
0e6ff38b61
Optimise strcpy calls to use strcpy_P
...
Saves 24 bytes of SRAM
2022-02-27 20:57:24 +01:00
3ab57086b1
Remove one call to dtostrf
...
I could not see any difference in the functionality when testing this locally
Changes save 818 bytes of flash memory
(I suspect this is due to dtostrf no longer being called in the firmware for MK3S?)
2022-02-27 20:57:24 +01:00
6e15df6a4e
Merge pull request #3430 from leptun/MK3_MK2_obsolete
...
Make the MK2 variants obsolete in the MK3 branch
2022-02-25 13:04:39 +02:00
0c716d21fe
Merge pull request #3377 from leptun/MK3_fix_lang_reserved_area
...
Fix lang reserved area alignment
2022-02-25 12:36:33 +02:00
a617025d85
Move MK2 variants to obsolete
2022-02-25 11:14:55 +01:00
ce7cccab80
Merge pull request #3417 from leptun/MK3_temperature_busy_messages
...
Print busy messages while waiting for heaters
2022-02-25 12:03:23 +02:00
50f4981a06
Remove forgotten SNMM code in M600
2022-02-24 14:02:49 +01:00
715f466fda
Add Norwegian
2022-02-22 11:56:01 +01:00
436b6f206a
Activate Swedish community translation
2022-02-22 06:59:23 +01:00
227b6b4b03
Fix FINDA timer
...
We want to set the FINDA state IF the timer has not expired.
It is helpful to see why by looking at the commit which broke
this 802b8860c8
2022-02-20 12:28:40 +00:00
0cc364ff7a
Print busy messages while waiting for heaters
2022-02-17 17:53:02 +01:00
b654217a5b
Merge pull request #3416 from leptun/MK3_MMU2_capability_line
...
Add MMU2 capability line
2022-02-17 17:44:39 +01:00
e98bb086cc
Merge pull request #3414 from leptun/MK3_xflash_partitioning
...
xflash partitioning
2022-02-17 17:10:10 +01:00
5499ce5931
Add MMU2 capability line
2022-02-17 17:05:17 +01:00
28a3458634
Fix crash detected message translation
2022-02-17 13:05:01 +01:00
c5999888e6
Version changed (3.11.0-RC1 build 4864)
2022-02-17 10:16:52 +01:00
159c9c34bd
Merge pull request #3089 from wavexx/show_axes_during_crash
...
Show affected axes in crash detection messages
2022-02-17 09:52:19 +01:00
52b464688f
Make layout static regardless of what is enabled
2022-02-17 09:34:09 +01:00
eae6b4e911
Merge pull request #3412 from leptun/MK3_TWI_timeout
...
Hardware TWI timeout
2022-02-17 09:26:47 +01:00
1e0f414d41
Make twi timer local to the wait function
2022-02-17 09:22:18 +01:00
536395eabf
Merge pull request #3413 from leptun/MK3_fix_timer_polling
...
Make some timers LongTimer
2022-02-17 09:00:13 +01:00
91c71da810
Convert some more suspicious timers to LongTimer
2022-02-17 08:48:29 +01:00
0172cbdf8b
Extra TWI disable code. Not used yet.
2022-02-17 00:05:31 +01:00
6351d29d70
TWI timeout
2022-02-17 00:05:09 +01:00
5b6a057037
Reduce duplication and code size
2022-02-16 16:45:06 +01:00
35a67ad51f
Fix typo
2022-02-16 16:23:31 +01:00
3a00054c55
Show the axes invoved during crash detection
...
Explicitly show which axes are affected on the status line when a crash
has been detected.
When the crash recovery prompt is triggered, also show all axes which
have been affected during the detection interval (currently X, Y, or
both).
The timer detection has been simplified to match the MK3 optical
filament timeout handling, which makes more sense: a crash immediately
following a crash recovery prompt will trigger the prompt again. The
timer needs to properly expire in order to reset the crash count.
This helps crash detection tuning (and help users reporting issues with
crash detection) without having to monitor the serial line.
This currently abuses the MSG_CRASH_DETECTED message by prepending the
[X][Y] labels to the message, which is ok in english but might not
translate that well for all languages.
2022-02-16 15:47:28 +01:00
9b6fca9214
Introduce lcd_show_yes_no_and_wait for future use
...
Split off yes/no lcd handling from
lcd_show_fullscreen_message_yes_no_and_wait_P into a separate function
in order to allow generic requests where the text prompt can change.
2022-02-16 14:17:56 +01:00
26f31743f7
Fix crashDet timer overflow handling
2022-02-16 10:06:07 +01:00
91797214b0
Update Eject and Cut to use for loop for menu items
...
Saves 134B of flash
2022-02-15 23:37:55 +01:00
2ec530c282
Do not hardcode the factory reset menu item count
2022-02-15 15:58:33 +01:00
a6331d22c8
Remove ancient SNMM code in the MK3 branch
2022-02-15 15:58:33 +01:00
775c460dc5
Merge branch 'MK3' into MK3_fix_usb_timer
2022-02-15 10:36:57 +01:00
9aa0b250ff
Merge pull request #3405 from wavexx/fixup_suspicious_indentation
...
Fixup suspicious indentation in lcd_show_sensors_state
2022-02-15 10:31:20 +01:00
8a1e9ea38e
Merge pull request #3397 from leptun/MK3_reset_time_remaining_on_stop
...
Fix time remaining not reset on stop print
2022-02-15 10:30:09 +01:00
2d9a154541
Merge pull request #3247 from gudnimg/remove-ifdef-gudni
...
Remove unused ifdef `MK1BP` and `MAX_SILENT_FEEDRATE`
2022-02-15 10:27:21 +01:00
e641d6e1e1
Merge pull request #1263 from metacollin/calfix
...
Make the simple 4 axis stepper control respect the axis inversion settings in Configuration_prusa.h
2022-02-15 09:26:42 +01:00
a1711f727e
Disable pullup crash test
2022-02-15 09:07:18 +01:00
73406f53e9
Merge pull request #3393 from gudnimg/add-menu-back-arrow-to-preheat-menu
...
Add menu back arrow to the Preheat menu
2022-02-15 08:49:07 +01:00
40881f52ad
Prettify lcd_show_sensors_state() v2
...
Allow to show the full precision of Xd/Yd by rearranging the layout
2022-02-14 23:30:08 +01:00
0c63e0e8df
Prettify MK3 sensor-info screen
2022-02-14 18:07:54 +01:00
d89f4e9952
Fix indentation in the MK3 sensor information screen
2022-02-14 17:59:47 +01:00
8d0f4b766a
Change fake SN as requested
2022-02-14 10:14:08 +01:00
4ec8781df2
Fix usb print timer
2022-02-13 22:52:49 +01:00
5ae45d583f
Fix time remaining not reset on stop print
2022-02-13 08:52:27 +01:00
480c30221e
Merge branch 'MK3_3.11.0' into MK3_3.11.0
2022-02-12 23:01:02 +01:00
bd3a835516
Optimise preheat menu's MENU_ITEM_BACK_P
...
Saves 10 bytes of flash memory
2022-02-12 14:17:11 +00:00
70ee06144e
Add menu back arrow to the Perheat menu
...
All other menus have this arrow on the back button.
2022-02-12 12:48:39 +00:00
7e90047bba
Use eeprom_update_block instead of a for loop
...
Saves 32B
2022-02-12 09:41:07 +01:00
4672b6444c
Merge branch 'MK3' into remove-eeprom-func
2022-02-11 19:32:11 +00:00
ea39a245af
Merge pull request #3388 from leptun/MK3_fix_broken_progmem_string
...
Fix PRUSA commands
2022-02-11 15:46:30 +01:00
8e73bb030e
Change to python3
...
Bump up version
2022-02-11 15:04:35 +01:00
3031f68d31
Fix Octoprint connect because of SN GET on blank einsy boards
2022-02-11 14:21:06 +01:00
5b45553f38
add community SK
2022-02-11 13:31:43 +01:00
6689581364
Allow SN get only on the Einsy
2022-02-11 13:11:13 +01:00
489e4fd35c
Fix PRUSA commands
2022-02-11 13:04:27 +01:00
9f093ee404
typo
2022-02-11 12:49:41 +01:00
ed8252527c
Add a uart RX timeout
2022-02-11 12:49:11 +01:00
426ab24c36
Let's not talk about this
2022-02-10 20:19:52 +01:00
bf45d4dcd1
Make the compiler align the lang reserved area to the spm page boundary
2022-02-10 20:19:52 +01:00
e358cb2b78
Fix DEBUG_SEC_LANG
2022-02-10 20:19:52 +01:00
834cc24e6c
Add SK language
2022-02-10 19:01:04 +01:00
882a73b867
VERBOSE_CHECK_HIT_ENDSTOPS
2022-02-10 16:42:02 +01:00
18dde3fb61
Faster code when endstops/probe are not enabled
2022-02-10 16:24:52 +01:00
42b91a83cd
Merge branch 'MK3' into MK3_3.12_Optimizations
2022-02-10 10:36:31 +01:00
dee8da61f6
Optimize endstop flags even more
2022-02-10 10:35:25 +01:00
380377db0f
Add static assert
2022-02-10 09:47:37 +01:00
Yuri D'Elia
Guðni Már Gilbert
3d-gussner
Alex Voinea
D.R.racer
DRracer
ingbrzy