62d362f45f
Also prevent longpress when Stopped
2022-12-19 10:50:34 +01:00
64eefa969b
TM: Disallow preheat/filament actions when stopped
...
Require acknowledgement first
Fix cherry-pick mmu2 issue
2022-12-19 10:50:06 +01:00
5fc277469a
TM: Allow to resume without a running print
...
If there is no running print, and the printer is Stopped, add a new
"Acknowledge error" menu entry to unlock the printer.
This simply calls lcd_print_stop(), which is identical in behavior to a
thermal error with a running print.
2022-12-19 10:48:40 +01:00
3c1c2fd2ca
Use menu_set_block() in ThermalStop()
...
Set a menu block for fatal thermal errors instead of abusing
lcd_return_to_status() to kick the user out of the menus.
This now allows a thermal model error to be recoverable through menu
access.
2022-12-19 10:48:26 +01:00
5e50a15c88
Do not show/call LCD status updates when unchanged
...
This mostly prevents useless serial noise
2022-12-19 10:48:12 +01:00
a551536386
TM: correctly mark repeated anomalies
2022-12-19 10:47:58 +01:00
3b65aa06c5
TM: Clear the Stopped state when stopping the current print
...
We allow resuming from the LCD via start print and resume print,
it makes sense to clear the error on stop too.
For this reason distinguish whether the action is performed
automatically or manually (ie: interactively).
The error is only cleared when the command is run interactively.
2022-12-19 10:47:41 +01:00
94583c861b
Rename print_stop() to lcd_print_stop_finish() for clarity
2022-12-19 10:47:26 +01:00
d37a2a173a
Parenthesize IS_SD_PRINTING defensively
2022-12-19 10:47:10 +01:00
de20fc6a5a
Replace two expressions with cmd_head
2022-12-19 10:46:58 +01:00
5ab0dcb4c5
Allow M310 to bypass the Stopped state for recovery
...
Since M310 cannot change the heaters, allowing M310 S0 (and changing
parameters) allows to recover a usb-controlled printer which has been
locked-out due to bad model settings.
2022-12-19 10:46:45 +01:00
42125b4bb2
Keep a pointer past the line number in cmdqueue
...
This allows to skip line numbers transparently and perform faster
checks on the actual command to process.
2022-12-19 10:46:33 +01:00
c890c9e8b0
TM: Do not lockout the menus on thermal errors
...
This prevents the ability to run gcode from the SD card.
In a thermal error with faulty values, and without serial access, this
is the only way to process an M310 instruction and recover.
2022-12-19 10:46:17 +01:00
d59dfc7bc7
Remove unused community translations
2022-12-16 16:08:55 +01:00
4c8afd8550
Shorten French translation
...
Fix cherry-pick issue Remove new MMU2 messages
2022-12-16 15:58:29 +01:00
263a4959d7
Fix `µ` character shown on translations
...
Fix cherry-pick issues
2022-12-16 15:58:29 +01:00
4438aa4909
TM: reset fan measuring state when changing speed
...
Ensure that fan checks are reset and use the new speed at each step of
the calibration.
This also gives extra time to the fan to ramp-up from a cold start,
when a fancheck could previously start right *after* the speed change.
Should fix #3791
2022-12-16 15:31:34 +01:00
1e19eedf26
Merge pull request #3806 from 3d-gussner/MK3_3.12_Fix_M862.4_strict
...
MK3_3.12: Fix `M862.4` with [strict] mode
2022-12-12 13:04:12 +01:00
a6eff8f8a5
Simplify firmware/gcode version comparisons
...
Fix cherry-pick issue
2022-12-12 12:43:13 +01:00
be668c89af
Merge pull request #3808 from 3d-gussner/MK3_3.12_Nozzle_change_community_translations
...
MK3_3.12: Nozzle change community translations
2022-12-07 07:19:53 +01:00
571895412d
Merge pull request #3804 from 3d-gussner/MK3_3.12_Shorten_French
...
MK3_3.12: Shorten French translation
2022-12-06 16:02:49 +01:00
732fb9dbfc
Merge pull request #3803 from 3d-gussner/MK3_3.12_FARM_Nozzle_change_menu
...
MK3_3.12: Add Nozzle change menu to FARM mode under Settings
2022-12-06 16:02:15 +01:00
9f22478c35
Update lang/po/Firmware_no.po
...
Co-authored-by: OS-kar <104255741+OS-kar@users.noreply.github.com>
2022-12-06 15:58:44 +01:00
8f1c11b016
Update Swedish translation
2022-12-06 15:58:22 +01:00
1b659c5ded
Update Nozzle change community translations
2022-12-06 15:57:34 +01:00
49506b5348
Fix `M862.4` with [strict] mode
...
Max 8 falvor versions
Fix cherry-pick issues
2022-12-06 13:31:44 +01:00
62eee7ddff
Shorten French translation
2022-12-06 11:31:18 +01:00
a1da5ed1ad
Add Nozzle change menu to FARM mode under Settings
...
Fix cherry-pick issue
2022-12-06 11:28:21 +01:00
b2b8fee015
Merge pull request #3790 from 3d-gussner/MK3_3.12_Nozzle_change
...
Fix yes no for Nozzle change
2022-11-30 17:59:34 +01:00
12fc82fc36
Fix yes no
2022-11-30 16:16:57 +01:00
b5b4e4d335
Merge pull request #3789 from 3d-gussner/MK3_3.12_Nozzle_change
...
Mk3 3.12 nozzle change
2022-11-30 15:51:17 +01:00
6062a507d9
Merge pull request #3770 from 3d-gussner/MK3_3_12_Temp_model_cal_wizard
...
PFW-1434: MK3_3.12 Temp model calibration during wizard
2022-11-30 15:34:01 +01:00
7a42af1ba6
Update internal translations
...
Fix G28 W
2022-11-30 15:23:31 +01:00
ade8a87a3f
fullscreen message: use \n to force the next word on the next line
...
Useful for printing short URLs since those contain punctuation characters, which get treated at the end of a word under usual circumstances
2022-11-30 15:23:07 +01:00
8261712635
Fix recursion
2022-11-30 15:22:42 +01:00
d87f499443
Nozzle change menu
...
Fix cherry pick
2022-11-30 15:20:44 +01:00
7ca4d73d4a
Updated community languages
...
Thanks to @ingbrzy @shatter136 @Hauzman
2022-11-30 08:09:33 +01:00
ac55c103a4
Update internal translations
...
Fix typo
2022-11-24 11:03:04 +01:00
a03183723c
Fix & optimize FW version parsing and checking
...
PFW-1433
2022-11-23 13:58:55 +01:00
2a7f75c2c3
Update CS translation
2022-11-22 08:42:00 +01:00
6d7d5d4ef3
Fix typo
...
Add Norwegian translations thanks to @OS-kar
2022-11-22 08:31:12 +01:00
696117e73b
Fix cherry-pick
2022-11-20 11:14:06 +01:00
6e330c11a7
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 11:12:20 +01:00
f8edad2fba
Unhack selftest hack during wizard
2022-11-20 11:05:45 +01:00
0f70665e44
XYZ calibration fixes
2022-11-20 11:05:26 +01:00
7e9d9ade5c
Fix wizard serial messages
2022-11-20 11:03:06 +01:00
7fe1a50899
Inital Temp Model cal wizard
2022-11-20 11:02:38 +01:00
12f6f34cf4
Merge pull request #3752 from 3d-gussner/MK3_3.12_v3.12.0-RC1
...
Bump up build number to 5576
2022-11-14 14:35:19 +01:00
a8de9d5696
Bump up build number to 5576
...
+2 for https://github.com/prusa3d/Prusa-Firmware/pull/3745
+1 commit
+1 merge
2022-11-14 14:17:11 +01:00
44763f71c0
Merge pull request #3747 from leptun/3.12_MK2.5_XYZ_Cal_fixes
...
MK2.5: unblock planner after plan_abort_hard()
2022-11-11 09:44:43 +01:00
Yuri D'Elia
3d-gussner
Yuri D'Elia
Alex Voinea
D.R.racer
DRracer