6ccd12c7e8
power panic: re-use saved_pos
...
This allows us to restore the position of all axis saved in RAM
If the extruder had been parked to the side for example
due to filament runout. Then the original position (before parking)
should now be restored
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-07-18 11:29:03 +02:00
97c27525d4
power panic: re-use saved_extruder_relative_mode
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-07-18 11:29:03 +02:00
a2ac513794
power panic: re-use target temps from RAM
...
If a print has been saved to RAM such as during a filament runout,
do not overwrite these saved values if a sudden
power panic appears.
Additionally, change the saved types to be the same as power panic when saving to RAM:
- Bed target temperature is uint8_t (0 to 255) instead of float
- Extruder target temperature is uint16_t instead of float
Doing this change allows us to re-use the same global variables and
avoid creating local variables during power panic.
Change in memory:
Flash: -246 bytes
SRAM: -5 bytes
2023-07-18 11:29:03 +02:00
a45e432030
power panic: Re-use code to save feedrate, segment index, and start position
...
Saves ~80B of Flash
2023-07-18 11:29:03 +02:00
67403603ed
power panic: Re-use saving print file state
...
This also adds the Gcode position into EEPROM
for Octoprint/PrusaLink prints.
Though the recovery part doesn't support that yet.
2023-07-18 11:29:03 +02:00
2902fcaa71
power panic: Add two functions
...
These functions should be able to be re-used during a power panic
- save_print_file_state
- restore_print_file_state
No functional change at the moment.
2023-07-18 11:29:03 +02:00
526a1dcc63
power panic: Move code into a separate file
2023-07-18 11:29:03 +02:00
2d461572dd
Fix command parameters offset
2023-07-13 11:05:29 +02:00
4450dbe4dd
Update serial echo macro to print from PGM
2023-07-13 11:05:29 +02:00
d9e6dd4efe
Update usage comment
2023-07-13 11:05:29 +02:00
5baa74a425
Add M118 Gcode support
2023-07-13 11:05:29 +02:00
7f95c54305
Move `Language update` to first row
2023-07-13 10:08:09 +02:00
9421785190
Update doxygen and po files
2023-06-29 08:23:13 +02:00
10e2357cc5
Change MMU2 to MMU3
2023-06-27 11:41:09 +02:00
7dc370a7e1
Move ISR7 code to fancheck.cpp
2023-05-23 07:43:40 +02:00
963bd508a4
Fix MK25 compiler warning
...
warning: 't_fan_rising_edge' defined but not used [-Wunused-variable]
2023-05-23 07:43:40 +02:00
0612a38885
Fix stepper inactivity timeout
2023-05-13 08:18:39 +02:00
0c453b53cd
Merge pull request #4193 from gudnimg/unload-sequence-improvements
...
Fix unload sequence for users without MMU
2023-05-10 07:29:16 +02:00
e24c2200f1
Set FILAMENTCHANGE_FINALRETRACT instead of hardcoded 0
2023-05-08 19:33:42 +00:00
71180ac284
Cleanup M600 init
...
Instead of removing FILAMENTCHANGE_FINALRETRACT
just set it to 0
No change in memory
2023-05-06 15:24:54 +00:00
8556336185
Fix unload sequence for users without MMU
...
Restores 3.12 sequence which was working well before.
M600 "L" parameter now works like M702 "U" parameter.
Removed a lot of the unused parameters which were copied
from Marlin 2.
Change in memory:
Flash: +96 bytes
2023-05-06 15:24:54 +00:00
462535ef7f
Restore 3.12 live Z-adjust menu behavior
...
Code size increases a bit but keep in mind the PR
that broke the behavior "saved" 182 bytes:
https://github.com/prusa3d/Prusa-Firmware/pull/4063
So I think this code size increase is OK
Change in memory:
Flash: +84 bytes
SRAM: 0 bytes
2023-05-06 12:08:06 +00:00
bf6c0919e1
Merge pull request #4166 from gudnimg/gudnimg-patch-1
...
M701/M702: Set default Z value to 0
2023-05-05 12:38:37 +02:00
fd2184801f
Merge pull request #4168 from gudnimg/next_feedrate_remove
...
Cleanup: Remove `next_feedrate` from global scope
2023-05-05 12:36:04 +02:00
9cf1f7871e
Minor fix to M701 when MMU slot is out of range
...
If MMU slot is outside of range, then we rather the printer
not do anything. Currently it would accidentally assume
the MMU is disabled. This may have undesireable results.
No change in memory
2023-05-02 22:32:18 +00:00
92e5747469
M600: remove dead code
...
The if statement doesn't do anything useful
so I propose it be removed before 3.13 release
Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
2023-04-29 23:43:27 +00:00
26369ac540
Restore old M701/M702 behavior
...
If the new Z parameter is not given,
assume that the old Z-lift behavior is desired.
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-29 16:22:28 +00:00
228250f050
Cleanup: Remove next_feedrate from global scope
...
No change in memory
2023-04-24 21:33:07 +00:00
78614f5670
M701/M702: Set default Z value to 0
...
Set default Z value to 0 to maintain backwards compatibility with older gcodes.
2023-04-24 09:09:43 +00:00
c7f0ee13be
Missed these macros disable_e1/2
2023-04-22 15:15:21 +00:00
4935191335
Cleanup remove unused macros
...
enable_e1
enable_e2
disable_e1
disable_e2
The firmware doesn't support multiple extruders
No change in memory
2023-04-22 15:15:21 +00:00
7889d54cfd
Merge pull request #4160 from gudnimg/cleanup-tcode-description
...
Rewrite the Tcodes description
2023-04-22 14:43:33 +00:00
76a76de7ea
Rewrite the Tcodes description
...
The old description had typos and was a bit confusing for new users
The new text is a suggestion from David Buzek at Prusa Research
2023-04-22 14:27:01 +00:00
51da6065c8
Merge pull request #4159 from gudnimg/cleanup-gudni-comments
...
Remove random `//-//` comments
2023-04-22 13:53:13 +00:00
ccabf1fa31
Remove random //-// comments
2023-04-22 13:39:08 +00:00
e516d8a0c4
Merge pull request #4156 from leptun/lcd_status_screen_block
...
Fix `M0` click not consumed
2023-04-22 15:01:16 +02:00
4ce3fa53a1
Optimise M0/M1 code size
...
Replace two bool variables with one.
It's not obvious but (!hasP && !hasS) is equal to
!(hasP || hasS)
Note: expiration_time_set = hasP || hasS
Truth table:
|--------------------------------------------------|
| hasP| hasS| (!hasP && !hasS)| !(hasP || hasS) |
|------|-----|--------------------|-----------------|
| 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 0 |
| 1 | 0 | 0 | 0 |
| 1 | 1 | 0 | 0 |
|--------------------------------------------------|
Change in memory:
Flash: -36 bytes
SRAM: 0 bytes
2023-04-21 17:42:55 +00:00
91b913e997
Fix `M0` click not consumed
...
Fix the need to click the knob twice to dismiss `M0`.
Flash: -54B
SRAM: -2B
2023-04-21 12:59:40 +02:00
18c389543b
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
2dcaae80d5
Merge pull request #4027 from gudnimg/minor-optimisation-gudni
...
Many minor optimisations for 3.13/3.14
2023-04-17 21:27:48 +02:00
ea97ca7920
Use `EXTRUDERS` instead of hardcoded value in string
2023-04-17 21:12:59 +02:00
b67063f14a
Remove empty lines
2023-04-17 21:10:20 +02:00
43d41ddd2b
cleanup: static variables in Marlin_main.cpp
2023-04-16 23:23:31 +00:00
01df65882f
cleanup: remove commented code
2023-04-16 15:25:43 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
b67c359129
Move fan_state to fancheck.cpp and make it static
...
No change in memory
2023-04-15 13:45:10 +00:00
7c23d8b00c
cleanup: make cancel_heatup static in Marlin_main
2023-04-15 13:45:10 +00:00
d148c08991
Remove dead code from get_coordinates()
2023-04-15 13:45:10 +00:00
c7de1b1416
optimize get_coordinates() axis mask
2023-04-15 13:45:10 +00:00
Guðni Már Gilbert
RoboMagus
3d-gussner
Alex Voinea