738dc511ee
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 16:45:39 +00:00
68ef03f46a
Fix PFW-1364 & possible comms timeout during reheat
2022-11-11 12:59:21 -05:00
59a452ac27
PFW-1397 minor comment tweaks
2022-11-08 13:49:40 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
d6e0f47739
PFW-1403 Rename ReportErrorSource to ErrorSource for shorter code
2022-10-08 08:51:32 +00:00
33690b927a
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-08 08:51:32 +00:00
6cfe000ac9
cleanup: Reorder members to match initialization order
2022-09-30 12:55:47 +02:00
edad625cf7
RIP Bondtech long live the Extruder
2022-09-16 16:31:27 +02:00
e9f5a95d4b
PFW-1362 Make sure FINDA runout is impossible with MMU disabled
...
Since mmu_loop() is called in the main loop() function
when the MMU is disabled, we need to utilise the
MMU protocol layer to prevent FINDA runout from happening
if MMU is disabled.
We also need to keep in mind we probably can't trigger
a FINDA runout in the middle of a Q0 query.
So my solution now is to wait for the "Finished" state
and check if the FINDA is off during printing.
When "Finished" state appears, the FINDA value should be up
to date.
2022-09-16 10:23:47 +02:00
4d3a5433ad
Implement read/write registers for M707/M708
2022-09-16 10:23:47 +02:00
2216ba9fbf
M600: Ask for which slot to use when loading
...
This fixes an issue where the assumed slot to use is unknown and
the printer will hang on loading filament 100.
Another good thing is this is an old user feature request which
we have in our 3.12 milestone.
Change in memory:
Flash: +14 bytes
SRAM: -1 bytes
2022-09-16 10:23:47 +02:00
6c0d3b0b78
Optimize MMU protocol logic
2022-09-16 10:22:39 +02:00
dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
fb087fc535
PFW-1386 Add M707 and M708
...
WriteRegister and ReadRegister function will create new compiler
warnings due to unused parameters, we can ignore it for now.
2022-09-16 10:22:38 +02:00
022aa53b2d
Remove active_extruder completely
...
we only use 1 extruder + saves ~800B
2022-09-16 10:22:38 +02:00
0d64cfa2e5
extruder variable should be one byte
...
Saves 1 byte of SRAM and 132 bytes of flash
2022-09-16 10:22:38 +02:00
ba52430e1d
Magic numbers are bad...
2022-09-16 10:22:38 +02:00
69c39e2281
An attempt at fixing the retry. Discussion needed.
2022-09-16 10:22:38 +02:00
c412f062c8
Perform 3xRetry automatically
...
This is a draft PR showing the potential 3x retry implementation on the printer's side.
It is much less code and looks more reliable than the same functionality in the MMU FW.
Still, more work needs to be done:
- [ ] Button is sent to the MMU even before returning from the parking position
- [ ] Then the button is sent again
- [ ] Then the printer runs out of retryAttempts
We need to find a better spot to check for "automatic" retry and issuing of the buttons
2022-09-16 10:22:38 +02:00
59d19a8330
PFW-1334 Move E-motor on FSENSOR error retry
2022-09-16 10:22:38 +02:00
ace5130d9f
PFW-1375 MMU error reported by MK3S does not appear on LCD
2022-09-16 10:22:38 +02:00
d7d6885765
PFW-1351 Cooldown timeout ( #33 )
...
* PFW-1351 WIP
* Fix bug with cooldown timing due to bad bitfield.
* Use default safety timer value for timeout
2022-09-16 10:22:38 +02:00
dab26fe50b
Report detected MMU version in the Support menu
...
It was just subtly broken, all the functionality had already been implemented.
2022-09-16 10:22:38 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
f9bedc3c94
Button handling WIP
2022-09-16 10:22:38 +02:00
9a20c85a5d
First pass, improving the error recovery.
2022-09-16 10:22:38 +02:00
8fd1653b84
PFW-1343 initial commit
2022-09-16 10:22:38 +02:00
d5cdb412ba
Introduce a way to read the previous tool used
2022-09-16 10:22:38 +02:00
d49e858cf7
PFW-1323 Fix MMU error screen doesn't disappear when error resolved on the MMU
2022-09-16 10:22:38 +02:00
7b91e73c8b
Fix issue where error screen updates too slowly in manage_response
2022-09-16 10:22:38 +02:00
11290c1123
Add a read function for mmu_print_saved
...
and remove the old extern value which is not used anymore
I had to remove "MMU2::" from mmu2_protocol_logic.cpp, otherwise the build failed.
2022-09-16 10:22:37 +02:00
9140ebba55
Add MMU FW version variables
...
hardcoded for now, but API ready
2022-09-16 10:21:53 +02:00
4fa4b3b2fc
Refactor Tx/Tc/T? commands
2022-09-16 10:21:53 +02:00
5870bbc524
Prune most of TODO from mmu2.cpp
...
+ refactor sound.h for better readability
2022-09-16 10:21:53 +02:00
2e293e90a0
MMU2 interface overhaul
...
First port of the new MMU2-printer interface into 8bit FW.
2022-09-16 10:21:53 +02:00
Guðni Már Gilbert
VintagePC
Yuri D'Elia
3d-gussner
D.R.racer