73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
204b43dce4
PFW-1336
...
The following situation is now fixed, steps:
1. Load filament through LCD
2. Load to nozzle through LCD
3. Before filament reaches Fsensor => turn off the printer
4. Wait a few seconds and then turn the printer on again
5. Start a print through the SD card
6. Printer will unload and then re-load the filament
Previously in step 6, the printer would start a print without any
filament loaded.
2022-09-16 10:22:38 +02:00
46184a9447
Update printer name if M862.3 is called but not M862.2
2022-09-16 10:22:38 +02:00
0e75a03c8c
Reuse FSensor runout blocking impl. throughout the whole FW
2022-09-16 10:22:38 +02:00
f04d83fc4c
Update printer's type (MMU/non-MMU) at runtime
...
+ reformat utils.cpp
2022-09-16 10:22:38 +02:00
5082da78d2
Convert button on LCD into button for MMU
...
- Dependent on current MMU error being processed
- Includes rename of LEFT_BUTTON_CHOICE -> LCD_LEFT_BUTTON_CHOICE (and right, middle as well) to avoid confusion with MMU buttons' ordering
2022-09-16 10:22:38 +02:00
f1803357b0
Fix default selection after changes in PFW-1312
...
The Yes and No are reverted. Before PFW-132 Yes is 1 and No is 0
Now they are Yes is 0, and No is 1
2022-09-16 10:22:37 +02:00
031c588802
Make all choice menus return consistent values
...
Such that left = 0, middle = 1, and right = 2
2022-09-16 10:22:37 +02:00
11290c1123
Add a read function for mmu_print_saved
...
and remove the old extern value which is not used anymore
I had to remove "MMU2::" from mmu2_protocol_logic.cpp, otherwise the build failed.
2022-09-16 10:22:37 +02:00
22287fec5d
Add original M600 MMU handling
...
seems to be almost unrelated to MMU function at all,
so returning it almost intact.
2022-09-16 10:21:53 +02:00
4fa4b3b2fc
Refactor Tx/Tc/T? commands
2022-09-16 10:21:53 +02:00
2e293e90a0
MMU2 interface overhaul
...
First port of the new MMU2-printer interface into 8bit FW.
2022-09-16 10:21:53 +02:00
c27e4623c5
Fix build (??)
2022-09-16 10:20:32 +02:00
329745368e
Improve PAT9125 UI implementation
2022-09-16 10:20:32 +02:00
340bc87110
Checkpoint: jam detection
2022-09-16 10:20:32 +02:00
f9ff929bbe
Enable fsensor when preparing for shipping
2022-09-16 10:17:04 +02:00
5484882758
Checkpoint after a lot of removal
2022-09-16 10:17:04 +02:00
fc49ba115a
Move more IR sensor analog stuff to Filament_sensor.h
2022-09-16 10:09:20 +02:00
7224b5c2b6
Remove OQ and add fancy autoload interaction
2022-09-16 10:08:39 +02:00
d84e6bda63
Remove old fsensor init
2022-09-16 10:07:49 +02:00
45e43137a5
Filament sensor refactoring initial
2022-09-16 10:07:49 +02:00
270a1086ab
No translation needed
2022-09-14 11:33:24 +02:00
0a68de0bbe
Update MSG c=xx
...
Mark unused strings as `_n`
2022-09-14 11:33:24 +02:00
510f13b24a
Make the diag pins open collector with pullup.
...
Solves random crash detected on startup
2022-09-14 07:39:47 +02:00
996f9943a1
Extract PRINTER_ACTIVE into a noinline function
...
Having the original PRINTER_ACTIVE macro copied at multiple spots doesn't make sense.
Refactoring it into a non-inline function saved ~400 bytes of code.
It should be safe in terms of performance, all occurrences are at non-time critical spots.
2022-09-14 07:31:39 +02:00
d78506a8ea
TM: Rename D70 I to D70 S for consistency with M310 S
2022-09-02 15:59:29 +02:00
10c524fdb3
TM: Add M310 [F] parameter to enable autotune self-test
2022-09-02 15:59:29 +02:00
9b5ef75b68
Correctly translate thermal model LCD messages
2022-09-02 15:59:29 +02:00
39eb728d54
More farm optimizations
...
Kudos @gudnimg
2022-08-30 13:57:43 +02:00
d1c30c338f
Fix farmless mode
2022-08-30 13:57:43 +02:00
bef7b086e3
Isolate the entire farm and statistics code
2022-08-30 13:57:43 +02:00
7d597eb8b0
Move farm mode to separate file
2022-08-30 13:57:43 +02:00
4e7d686b83
Merge pull request #3574 from leptun/extra_optimizations
...
More optimizations for 3.12 to fit
2022-08-29 19:25:46 +03:00
692f51c51e
Save target bed temperature, not current temperature
2022-08-28 11:21:17 +03:00
7d86a0d121
Reduce a few magic numbers for FILENAME_LENGTH
...
flash: 0
RAM: 0
2022-08-26 19:26:26 +03:00
22582e560e
Remove one redundant st_synchronize() call
...
flash: -4
RAM: 0
st_synchronize() is called just before leaving gcode_G28() so we don't need to call it again just after leaving gcode_G28()
2022-08-26 19:25:07 +03:00
25350dfbbc
Remove unused variable bFilamentFirstRun
...
flash: 0
RAM: -1
2022-08-26 19:14:40 +03:00
f7ae3039f8
Don't include M851 in build if Auto Bed Leveling is not enabled
...
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
2022-08-26 15:35:28 +00:00
78534f3b48
Start at the first segment, not the last segment
2022-08-24 20:19:26 +03:00
671519caf3
Optimize by hand since the lto is still stooopit
...
saves ~100B
2022-08-24 20:19:26 +03:00
b27c8b50e0
Fix power panic handling
2022-08-24 20:19:26 +03:00
05bd1ba57f
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
0933fdb6fe
Merge pull request #3552 from wavexx/temp_model_check
...
Thermal Model protection
2022-08-24 19:16:48 +02:00
7cd888cd0a
Update documentation of ThermalStop()
2022-08-21 15:22:46 +02:00
3ebd8b88a4
Merge pull request #3486 from gudnimg/gudni-optimisation
...
Flash optimizations in loop() and status screen menu
2022-08-19 17:21:17 +02:00
0a8d2a3224
Merge pull request #3456 from wavexx/filament_load_consistency
...
Cleanup: use more constants in M701
2022-08-19 17:14:54 +02:00
84888507e3
Merge pull request #3557 from wavexx/fix_g28_code_value
...
G28: check for X/Y/Z parameters before calling code_value_long
2022-08-19 17:12:07 +02:00
06d19b472a
G28: check for X/Y/Z parameters before calling code_value_long
...
Fixes #3555 , thanks to @toombaumarkt
2022-08-07 00:36:54 +02:00
68c04ca2f6
Switch a few pointers that don't manipute strings to const
2022-08-06 23:08:03 +02:00
a533ba3574
Reset sdpos_atomic when starting a new SD print
...
Fix an incorrect SD offset on the first G-Code command when the second
SD print is started.
2022-08-06 22:16:50 +02:00
VintagePC
Guðni Már Gilbert
D.R.racer
Alex Voinea
3d-gussner
Yuri D'Elia
DRracer