73c76579af
PFW-1504 Add init for progress bar
...
In case we are running a retry, the firmware
should clear the old rendering before
starting on a new one
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
51f1aa14a5
PFW-1504 Update last position as quickly as possible
...
0.1mm extrusion may happen while updating the LCD
No change in memory
2023-03-13 06:47:08 +01:00
bbfc4b9f78
PFW-1504 initial commit
...
Change in memory:
Flash: +162 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
04d440a9c8
Fix AutoLoad filament menu not shown when FSensor is [Off] ( #4072 )
...
Fix AutoLoad filament menu not shown when FSensor if [Off]
2023-03-10 14:23:56 +01:00
ce78ac19ff
Merge pull request #4071 from 3d-gussner/MK3_Fix_M706_LCD_stuck
...
Fix M706 lcd message stuck
2023-03-10 07:57:01 +01:00
ba41b2bb0b
Fix M706 lcd message stuck
2023-03-09 07:00:40 +01:00
e787111922
Add MMU error code: MCU_UNDERVOLTAGE_VCC ( #4069 )
...
+ read bandgap voltage periodically
+ correct wording of ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC (as requested in Prusa-Error-Codes PR#81)
2023-03-08 15:42:25 +01:00
a20a7232a8
Change "Extruder N" to "Filament N"
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2023-03-06 10:26:12 +01:00
03280c48d5
Merge pull request #4059 from gudnimg/planner-opt-subtraction
...
planner: calculate step difference once
2023-03-03 14:42:47 +01:00
474d489c39
Merge pull request #4033 from gudnimg/improve-preheat-target
...
preheat: improve target temperature threshold
2023-03-03 14:41:58 +01:00
bc818636b0
Increase MMU FW version to 2.1.8
...
in relation to MMU-218
2023-03-02 19:58:00 +01:00
d487254806
planner: calculate step difference once
...
Change in memory:
Flash:-158 bytes
SRAM: 0 bytes
2023-03-01 22:28:08 +00:00
93580ce471
Merge pull request #4051 from 3d-gussner/MK3_3130_B1
...
Bump up FW version and build number
2023-02-24 16:57:30 +01:00
051054b0db
Bump up FW version and build number
2023-02-24 16:42:36 +01:00
cdca628556
Merge pull request #4050 from DRracer/mmu-eeprom-reset
...
Introduce MMU EEPROM reset feature
2023-02-24 15:43:49 +01:00
303a67cd6f
Introduce MMU EEPROM reset feature
...
This new feature requires MMU FW v 2.1.7 (which brings some more small changes)
2023-02-24 15:26:07 +01:00
31bfbb4ed0
Merge pull request #4023 from DRracer/rename-eject-mmu
...
PFW-1497 Change Eject filament -> Eject from MMU
2023-02-23 10:48:35 +01:00
afc866e756
Merge pull request #4010 from gudnimg/improve-backlight-control
...
backlight: always allow backlight to dim/wake
2023-02-21 10:00:03 +01:00
e6c3130ef3
Update SK po file
...
Thanks to @ingbrzy see https://github.com/prusa3d/Prusa-Firmware/pull/4023#issuecomment-1436084153
2023-02-21 07:24:21 +01:00
22b43c2f2b
Merge pull request #4043 from 3d-gussner/MK3_Fix_fil_loaded_timeout
...
MK3: Set `Is filament loaded? Yes|No` default to `No` without a timeout.
2023-02-21 07:18:54 +01:00
8a926fad10
backlight: set rotation flag when certain amount of pulses are detected
...
We don't want to trigger a backlight wakeup randomly, for example
due to background noise.
2023-02-20 18:26:43 +00:00
792a39c416
Merge pull request #3754 from gudnimg/languages-gudni
...
Update language script to run on Windows
2023-02-20 19:10:50 +01:00
940f5b7214
Add executable permission for update-po.py and update-pot.py on Linux
2023-02-20 17:53:41 +00:00
36c6b323c4
Set `Is filament loaded? Yes|No` default to `No` without a timeout.
2023-02-20 16:31:23 +01:00
791b9b4d39
Merge pull request #4028 from DRracer/pr3322-updated
...
Merge duplicate strings in cmdqueue.cpp
2023-02-20 13:51:09 +01:00
496b52b819
preheat: sync temperature threshold in M600 and Wizard
...
* M600 used 1°C threshold, which may increase the waiting time a bit
* Wizard used 3°C
Sync both to use TEMP_HYSTERESIS for consistancy
No change in memory footprint
2023-02-19 13:23:31 +00:00
6ad126ef0b
optimisation: preheat menu always uses integers for target temperature
...
Let's drop the float comparison since it not needed
Change in memory:
Flash : -16 bytes
SRAM: 0 bytes
2023-02-19 13:21:30 +00:00
319fec47f0
preheat: improve target temperature threshold
...
Use 5°C threshold to be consistant with other parts
of the firmware.
Relying on 95% of the target temperature creates
a dependency on the temperature:
PLA: Target = 215°C, threshold = 10.75°C
PETG: Target = 230°C, threshold = 11.5°C
ABS: Target = 255°C, threshold = 12.75°C
ASA: Target =260°C, threshold = 13.0°C
PC: Target = 275°C, threshold = 13.75°C
My proposal is we instead use a constant
TEMP_HYSTERESIS = 5, which is consistent with
M109, and behavior when restoring print from RAM
and some of the MMU code (like unload function)
Change in memory:
Flash: +2 bytes
SRAM: 0 bytes
2023-02-19 12:59:58 +00:00
1283c2c216
Reformat to fit to 4 lines
2023-02-18 21:15:55 +01:00
82d9819af3
Fix grammatical errors
2023-02-18 21:15:55 +01:00
db878c9996
backlight: always allow backlight to dim/wake
...
This commit adds the ability for the firmware to dim and wake the
backlight when LCD updates are disabled. Such as in the MMU error screen
or when rendering full screen messages which typically
disable the LCD updates to prevent the status screen from rendering.
Fixes #2777
Change in memory:
Flash: -26 bytes
SRAM: +1 byte
2023-02-18 17:08:35 +00:00
fe71fa77a6
Update NO translation
2023-02-18 17:40:09 +01:00
6f066db443
Update HU translation
2023-02-18 17:39:30 +01:00
5cd60636f9
Add missing translations + shorten to 16 chars
2023-02-18 17:39:30 +01:00
ec1ae321b3
ES translation
2023-02-18 17:39:30 +01:00
98e7c15928
Change Eject filament -> Eject from MMU
...
PFW-1497
2023-02-18 17:39:30 +01:00
05662a5c0a
optimsation: reduce code size in LCD rendering
...
Change in memory (MK3S+ Multilang):
Flash: -62 bytes
SRAM: -6 bytes
2023-02-18 16:32:08 +01:00
074057c110
Fix an issue where LCD freezes during loading test
...
It may be useful to view the Sensors menu
while the toolchange loading test is taking
place. For example to see if the reading is flickering
The firmware needs to call lcd_update(0) to update the screen rendering.
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-02-18 13:16:40 +01:00
555e766296
optimisation: only update mm when i > 0
...
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
e41b6d106d
optimisation: use more string from PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
9f4a7adb9a
optimisation: extract common M861 code
...
Change in memory:
Flash: -128 bytes
SRAM: 0 bytes
2023-02-18 12:39:44 +01:00
ee23d6c62a
Merge duplicate strings in cmdqueue.cpp
...
Original idea from @GilesBathgate, PR #3322 . This is just a rework on top of current MK3 branch.
2023-02-18 11:37:48 +01:00
526e02a041
Fix an issue with using --file argument
...
The following command did not work in the lang folder:
python .\update-po.py --file ./po/Firmware_cs.po
To resolve this we just extract the filename from
the path and use the constant PO_DIR to make
sure the path is always the same.
2023-02-18 10:30:18 +00:00
b6ef8ea32c
Add a backup of po files
2023-02-18 10:13:34 +00:00
280a904799
ubuntu: subprocess does not allow extended glob
...
It's my understanding that we cannot use extended globbing
on Linux because
of the way I am invoking the lang-extract
script. the python script is not run through bash/shell.
We would need to perhaps use Shell = True in check_call() but
then the all the input arguments needs to be one string.
This commit was tested on Ubuntu 22.04.1 LTS
2023-02-18 09:53:57 +00:00
327254d091
Expand glob in update-pot on Windows only
2023-02-18 09:53:57 +00:00
62c87a1fe5
Adjust module docstring
2023-02-18 09:53:57 +00:00
b14f3780d4
Add mutually exclusive arguments --file and --all
...
Only one of these arguments must be supplied, or argparse raises an error.
2023-02-18 09:53:57 +00:00
4a93288353
Update README
2023-02-18 09:53:57 +00:00
d90859e6a6
Add requirements.txt
2023-02-18 09:53:57 +00:00
Guðni Már Gilbert
3d-gussner
DRracer
D.R.racer
Snakzi