7d3c416d04
cleanup: remove unused function sm4_line_xyze_ui
...
No change in code size. Reason for removing this function
is just to reduce lines of code that is maintained.
2024-09-01 12:11:22 +00:00
6c99a4463e
Merge pull request #4755 from sarusani/AddLoadIfAutoloadDisabled
...
Add "load filament" if autoload is disabled
2024-08-30 17:11:37 +02:00
a259482b6b
Add load option if autoload is disabled
2024-08-30 14:48:45 +02:00
923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling
...
Remove legacy Auto Bed Leveling code
2024-08-30 10:44:50 +02:00
b353f1f008
Add missing translations
...
Used `trans -b :cs+de+es+fr+hr+hu+it+nl+no+pl+ro+sk+sv "<text>"` to translate
Looked at pre-translated text to reuse as much as possible.
2024-08-26 10:02:56 +02:00
c1360d7bfb
Fix LCD output
...
Configuration->HW Setup->Checks showed `a`
MSG_FILAMENT `Filament` can only be 8 chars long and only ES and IT had `Filemanto` as translation.
But as ES the `o` in `Filamento` was overwritten by `[Estricto]` I removed the MSG_FILAMENT to be translated.
Saves few bytes.
2024-08-26 09:20:05 +02:00
f7e3195d78
Remove CUSTOM_M_CODES define
2024-08-24 16:33:00 +00:00
2b1c49dae2
Remove legacy Auto Bed Leveling code
...
The goal is to clean up the project
2024-08-24 07:11:38 +00:00
f5fe658728
fixup after rebase
2024-08-24 07:10:24 +00:00
5e66e71a48
Check if MMU is enabled by reading EEPROM
2024-08-24 07:10:24 +00:00
4ed5b36199
Use a fresh EEPROM cell for the new value
2024-08-24 07:10:24 +00:00
40d3830e6d
Simplify filament_presence_check usage
...
Pull all checks needed into the function such that the caller
only needs to check the return value
Also added description for the filament_presence_check function
2024-08-24 07:10:23 +00:00
75c980c4e7
optimisation: deduplicate more code
...
Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
2024-08-24 07:10:23 +00:00
b7caf36207
optimisation: deduplicate printer check toggle menus
...
This saves ~100B of flash
2024-08-24 07:10:23 +00:00
bf72ecc3f9
Add filament presence check at start of print
...
A new menu setting is added to configure how strict the check should be.
- None: No check is performed
- Warning (default): The user is warned about missing and is prompted to continue with Yes/No. If No is selected, the print is aborted. If no user input is given (e.g. from host printing) then the warning will expire in 30 seconds and assume the Yes option was selected
- Strict: If the filament is not detected when a print is started, it is immediately canceled.
The check is currently performed on G-codes: M24 and M75. Starting a SD print and Host print respectively.
2024-08-24 07:10:23 +00:00
055f601ad3
Merge pull request #4751 from sarusani/FilamentRunoutActions
...
Send host actions on filament runout
2024-08-23 15:13:08 +02:00
8fe73a0dc2
Update to MMU FW 3.0.3
2024-08-23 14:31:49 +02:00
c27fb616e0
Merge pull request #4737 from sarusani/ReplaceSetReadyMenuEntry
...
Allow to replace Set Ready menu entry
2024-08-23 14:30:44 +02:00
a2022471ce
Send host actions on filament runout
2024-08-23 10:44:38 +02:00
a9e7f387e8
Replace Set Ready menu entry
...
Replace "Set Ready"/"Set nor Ready" menu entry with "Print from host" entry.
Use "action:start" instead of "action:ready"
2024-08-23 10:24:01 +02:00
64d9f201da
Exit Nozzle Change if filament is loaded
...
Abort Nozzle change if fsensor is enabled and filament is present.
2024-08-23 10:12:01 +02:00
815b68678d
M600 - Show filament name at the Insert filament prompt
2024-08-21 20:56:13 +03:00
f64f2bbe68
Merge pull request #4747 from gudnimg/minor-fixes-for-future-tests
...
Fix compiler warning and add missing includes in unit test environment
2024-08-20 11:14:06 +02:00
e2e6999887
Merge pull request #4753 from gudnimg/remove-HEATER_BED_DUTY_CYCLE_DIVIDER
...
Remove dead configuration `HEATER_BED_DUTY_CYCLE_DIVIDER`
2024-08-19 08:47:22 +02:00
3da141b3a7
Remove dead configuration HEATER_BED_DUTY_CYCLE_DIVIDER
...
Setting HEATER_BED_DUTY_CYCLE_DIVIDER has no effect on the firmware
2024-08-15 17:58:07 +00:00
d3f2dce430
Lower MIN_Z_FOR_UNLOAD
...
Sync value with Buddy firmware
2024-08-14 12:09:41 +02:00
80f27618c9
Marlin: drop lcd.h include
...
Only include it where needed
2024-08-13 23:40:18 +00:00
41245b2a59
Marlin: drop mmu2.h include
...
We should only be including it where needed
2024-08-13 23:26:09 +00:00
835caa0230
mesh_bed_calibration: drop Marlin.h include
2024-08-13 23:23:21 +00:00
0153eb05a1
util: add stdio.h include for sprintf_P
2024-08-09 14:57:07 +00:00
a1fcb8564e
util: reorder includes alphabetically
...
Place system includes on top
2024-08-09 14:57:07 +00:00
f628c5f912
util: should include avr/eeprom.h
...
The file is calling eeprom_read_byte and should include avr/eeprom.h
2024-08-09 14:57:07 +00:00
9ae8beacc6
eeprom: add missing include stddef.h
...
Fixes compiler warning in test environment:
Prusa-Firmware/Firmware/eeprom.h:712:51: error: ‘size_t’ has not been declared
712 | bool eeprom_is_initialized_block(const void *__p, size_t __n);
|
2024-08-09 14:57:07 +00:00
ad1e3cb12a
Configuration: missing stdint.h include
...
The following error is raised in unit testing environment:
Prusa-Firmware/Firmware/Configuration.h:16:14: error: ‘uint16_t’ does not name a type
16 | extern const uint16_t _nPrinterType;
2024-08-09 14:57:07 +00:00
10d156b28c
tests: Fix a compiler warning in tests -fpermissive
...
Prusa-Firmware/tests/../Firmware/util.h:114:25: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
114 | pStrEnd = strchr(this->ptr, '"');
| ~~~~~~^~~~~~~~~~~~~~~~
| |
| const char*
2024-08-09 14:57:07 +00:00
428091b7c7
Merge pull request #4736 from gudnimg/cleanup_recursion_hack
...
Remove recursion workaround in Nozzle Change
2024-08-08 11:17:28 +02:00
efc4cc4996
Remove unused enum MeshLevelingState
2024-08-03 16:48:08 +00:00
15670f21bd
lcd_pick_babystep() doesn't exist anywhere
2024-08-03 16:32:41 +00:00
371c040e8a
EEPROM_BABYSTEP_Z0 is no longer used anywhere in the code base
2024-08-03 16:32:20 +00:00
25a11bb7d7
Forbid LcdUpdateDisabler to call lcd_update()
...
The fixes a scenario where:
lcd_status_screen() calls lcd_commands() upon exiting
lcd_show_fullscreen_message_and_wait_P(_T(MSG_NOZZLE_CNG_READ_HELP));
and so not allowing the user to leave the screen since it will keep being rendered endlessly.
This change only affects lcd_show_fullscreen_message_and_wait_P
2024-08-03 15:43:08 +00:00
f96cc2f400
cleanup recursion workaround in nozzle change
...
This fix is no longer needed today.
LCD knob clicks / and rotation, take care of updating lcd_draw_update.
The real bug was likely lcd_show_multiscreen_message_yes_no_and_wait_P calling lcd_update(), this is fixed now since.
2024-08-03 15:43:08 +00:00
ff16bfd8fa
Merge pull request #4739 from gudnimg/prune-disabled-code
...
Remove a bit of unused code which is disabled at compile time
2024-08-03 10:34:40 +00:00
23f92b24b8
Merge pull request #4735 from gudnimg/cleanup-dead-variable
...
Remove commented variable `load_filament_time`
2024-08-02 16:10:17 +00:00
04a7175cc7
Remove LARGE_FLASH preprocessor symbol
...
It's not very useful as is ... probably remnant from Marlin 1
2024-07-31 12:06:35 +00:00
81f1ec4975
Remove unused messages
2024-07-31 11:57:49 +00:00
0d45228dbd
Remove commented lcd_update_enable(true)
2024-07-31 11:15:39 +00:00
396a8ca4f9
Remove VT100 code
2024-07-31 10:35:18 +00:00
eb7969441a
Remove Servo..h/cpp
2024-07-31 10:31:05 +00:00
2cbbdbacd5
Remove a bit of unused code which is disabled at compile time
...
Some of these have been used > 6 years and don't compile anymore.
Reason to want this removed is just to reduce the code we maintain
2024-07-31 09:53:45 +00:00
d485e4fb0b
Add type to save 50B
...
Saves 50bytes
2024-07-30 15:15:05 +02:00
Guðni Már Gilbert
3d-gussner
sarusani
Panayiotis-git