159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
1036c4f755
Do not precede first layer calibration without filament if print is paused due to MMU load failed.
2019-08-16 19:00:45 +02:00
b10bd8340a
Make local functions static.
2019-08-15 17:57:30 +02:00
0b798767af
Fix preheat ASA.
2019-08-15 17:54:23 +02:00
a6f955b62d
Use unused macros *_PREHEAT_FAN_SPEED.
2019-08-15 17:47:34 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
36a69281ee
Remove unused functions forward declarations.
2019-08-15 17:36:05 +02:00
0e4e644476
Merge branch 'MK3' into MK3_3.8.0
2019-08-15 10:34:50 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
dc78bc7362
Improve performance of bed PWM automaton - proof of concept
...
There are still some artefacts on the output pin - work in progress.
2019-08-14 17:53:08 +02:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
84cf1b83c3
Merge pull request #2083 from DRracer/viper
...
Workaround for the "viper" situation bug.
2019-08-07 17:48:57 +02:00
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b
...
farm mode update, documentation correction
2019-08-07 17:48:30 +02:00
d9dec38815
Workaround for the "viper" situation bug.
2019-08-07 17:23:19 +02:00
7da2ee5fc3
Version changed (3.7.3 build 2370)
2019-08-06 15:37:23 +02:00
33037d369c
Prevent LCD long-press re-entry ( fixes #1196 )
2019-08-05 19:00:29 +02:00
b471bb7540
farm mode update, documentation correction
2019-08-05 17:51:26 +02:00
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check
...
Fw version check disabled in farm mode
2019-08-05 17:41:16 +02:00
091cd49ca5
Fw version check disabled in farm mode
2019-08-05 16:59:09 +02:00
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound
...
changed blind sound
2019-08-05 12:47:31 +02:00
f77414be2b
blind alert sound shorter
2019-08-05 12:41:27 +02:00
f1a947af2c
Whole hw settings hidden in farm mode
2019-08-05 10:40:21 +02:00
cb19f0958b
Use _delay() and _micros() for future compatibility
2019-08-05 09:51:06 +02:00
5f14e9c2e5
Removed sheet setting when in farm mode
2019-08-03 17:35:39 +02:00
15a095ea76
changed blind sound
2019-08-03 15:37:11 +02:00
7c9d3dd177
Update doxydoc of new G-codes
2019-08-01 13:09:20 +02:00
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873
...
UI update
2019-08-01 07:20:09 +02:00
2cb977e4a0
UI update
2019-07-31 20:39:57 +02:00
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1
...
Correct bug in util.cpp is_whitespace_or_nl function.
2019-07-31 17:00:49 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
bca0fd81eb
Fix loading filament 255 instead of 0 in first layer calibration wizard.
2019-07-30 19:15:33 +02:00
0aed59c947
Fix unsigned char overflow cause invalid filament load.
2019-07-30 19:06:57 +02:00
952a24b45d
Update util.cpp
...
Correct "is_whitespace_or_nl": change 'r' to '\r'.
2019-07-28 19:40:18 -06:00
3ddb853bbd
Fix shifted languages. Use \n and \x0a
2019-07-26 18:53:08 +03:00
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention
...
Fix missing mmu attention
2019-07-26 09:07:06 +02:00
3b396fb8bf
Merge branch 'MK3' into fix_missing_mmu_attention
2019-07-25 19:10:07 +02:00
a9e9a9857b
Fix "MMU needs attention screen is missing in case of failed unload filament".
2019-07-25 19:09:52 +02:00
3438c0e411
Merge pull request #2042 from NotaRobotexe/octoprint_bugs
...
fixed redundant OK messages in serial
2019-07-25 12:41:43 +02:00
2820baf016
Merge pull request #2040 from NotaRobotexe/MK3
...
multiple sheets - menu switching bug
2019-07-25 09:56:07 +02:00
64115fb146
fixed redundant OK messages in serial
2019-07-24 18:08:14 +02:00
5021fadd5d
multiple sheets - menu switching bug
2019-07-24 11:20:27 +02:00
33195baf9d
Merge pull request #2035 from mkbel/enable_lin_corr
...
Re-enable linearity correction for MK3.
2019-07-24 09:08:43 +02:00
851aaac053
Merge branch 'MK3' of https://github.com/NotaRobotexe/Prusa-Firmware into MK3
2019-07-23 19:29:36 +02:00
fb35009628
multiple sheets,fix of bug in switching sheets from menu
2019-07-23 19:25:59 +02:00
f9e32c4bf4
Re-enable linearity correction for MK3.
2019-07-23 19:22:54 +02:00
3e60cf4537
enable only for MK3S (out of FLASH on the MK3)
2019-07-23 16:51:02 +02:00
593675c667
delay, micros for the 3.7.x branch
2019-07-23 16:40:21 +02:00
6860a572c2
detection of faulty RAMBo (incorrect capacitor on fan tach pin) for MK3/S
2019-07-23 15:55:53 +02:00
c4d5e332c8
Merge branch 'MK3' into MK3
2019-07-23 11:34:42 +02:00
b9f622f8a6
variables to PROGMEM, text formating
2019-07-23 11:31:20 +02:00
b5129ff2ec
Revert "force push"
...
This reverts commit 19e7838c20
2019-07-23 11:12:53 +02:00
19e7838c20
add default names to PROGMEM, text formating edit
2019-07-22 20:35:10 +02:00
ab2eafe175
sheet menu, add hw setting, sheet change in menu, sheet name initialization in eeprom
2019-07-22 18:43:43 +02:00
6f79ef4c9c
resolve hidden conflicts in commented code
2019-07-22 17:29:43 +02:00
65087b89ee
Merge remote-tracking branch 'upstream/MK3' into code_size_optimization
...
and resolve conflicts (ultralcd.cpp)
2019-07-22 17:26:14 +02:00
b96c9700ce
fix prusa_statistics code size optimization according to unit test
...
results
2019-07-22 17:10:04 +02:00
79c326cdaa
Merge pull request #2022 from kuhnmarek/gcodes_doxygen
...
Updated doxygen docs to work better with confluence.
2019-07-22 12:52:27 +02:00
9c95f8c015
sheet menu
2019-07-19 18:34:46 +02:00
bd4bfbe586
Added M862 details
2019-07-19 16:15:12 +02:00
94e79806bc
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
03e80ce4a8
PFW-917 Adjust Z value persists across update to v3.8
2019-07-18 16:50:44 +02:00
b0c41ec979
Merge pull request #2017 from NotaRobotexe/octoprint_fix
...
Octoprint fix
2019-07-18 16:02:38 +02:00
14b39b0094
Merge pull request #2019 from leptun/MK3_fix_LCD_WDT_RESET
...
Fix lcd not initing after WDT reset
2019-07-18 13:27:32 +02:00
121e60655a
Fix lcd not initing after WDT reset
2019-07-18 11:50:18 +03:00
1ae072c332
Merge pull request #2014 from NotaRobotexe/sound_fix
...
crash and filament unload sound change
2019-07-18 09:41:05 +02:00
090ea3145d
Merge pull request #2015 from NotaRobotexe/text_edits
...
small text edit
2019-07-18 09:39:28 +02:00
756ce51b5e
Merge branch 'MK3' into octoprint_fix
2019-07-17 20:06:06 +02:00
b8fec59f21
octoprint fan error fix
2019-07-17 19:59:31 +02:00
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873
...
GUI updates
2019-07-17 14:49:07 +02:00
1c44eddf81
crash and filament unload sound change
2019-07-17 12:32:27 +02:00
255db28684
merge unit test and upstream changes
2019-07-17 10:30:49 +02:00
eb705b6b17
Merge pull request #2012 from leptun/MK3_LCD_improvements
...
LCD fix status screen lcd_putchar
2019-07-17 08:05:56 +02:00
3a87ff56f6
Default to "Move Z" above a certain height even when printing
...
This speeds-up the ability to manually get the carriage out of the way
just after a print has finished
2019-07-16 22:04:32 +02:00
d8ecb2d0c9
Fix status screen
2019-07-16 21:11:27 +03:00
034cbff10a
GUI updates
2019-07-16 20:10:49 +02:00
0c660a6fb1
Revert "Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]."
...
This reverts commit a54fd29fa4
2019-07-16 21:10:11 +03:00
e6255e8451
octoprint fan error work
2019-07-16 19:18:31 +02:00
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements
...
Lcd optimization - 1K of flash saved
2019-07-16 19:15:57 +02:00
a54fd29fa4
Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type].
2019-07-16 20:02:01 +03:00
fecccf50e5
Remove duplicate prototypes from ultralcd.h. Make functions unreferenced outside lcd.cpp static. Disable unused functions by preprocessor to suppress warnings.
2019-07-16 20:01:49 +03:00
3e292fd6b0
Fix compiler warnings:
...
sketch/Marlin.h:178:17: warning: extra tokens at end of #undef directive
sketch/Marlin.h:181:24: warning: extra tokens at end of #undef directive
sketch/Marlin.h:182:0: warning: "enable_z" redefined
2019-07-16 18:16:28 +02:00
cee875fc6a
Fix compiler warnings:
...
warning: enumeration value '_None' not handled in switch [-Wswitch]
warning: enumeration value '_Undef' not handled in switch [-Wswitch]
2019-07-16 17:40:28 +02:00
6b8a5bc3ac
Fix compiler warnings
...
sketch/tmc2130.cpp:146:42: warning: default argument given for parameter 1 of 'void tmc2130_init(bool)' [-fpermissive]
sketch/tmc2130.cpp:146:24: warning: unused parameter 'bSupressFlag' [-Wunused-parameter]
2019-07-16 17:31:56 +02:00
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
d65b333664
Merge pull request #2003 from mkbel/heat_hysteresis
...
Heat hysteresis
2019-07-16 13:10:47 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
8b1c687629
Lcd optimization - 1K of flash saved
2019-07-15 20:32:58 +03:00
f0727214ed
Document
2019-07-15 19:15:15 +02:00
Marek Bel
XPila
DRracer
Yuri D'Elia
MRprusa3d
Marek Kühn
Simon Benoit
Keith Spitz
leptun
NotaRobotexe