9083d151b2
wait_for_heater() in restore_print_from_ram_and_continue() only if saved_extruder_temperature differs from target hot-end temperature.
...
This fixes problem, that restore_print_from_ram_and_continue() blocked for heating for at least TEMP_RESIDENCY_TIME (3 seconds) even if temperature was resumed by M600 command.
2019-07-15 18:07:05 +02:00
ab4e789688
Partially revert "aeed49a Fix filament runout on optical filament sensors"
...
Revert plan move to filament change position before enqued M600.
This was workaround to problem that restore_print_from_ram_and_continue() did 3s heating pause before resuming print. This problem will be fixed properly in restore_print_from_ram_and_continue() in next commit.
Save 166B of FLASH.
2019-07-15 17:22:39 +02:00
549a8a1a6b
Restore print fan speed earlier then nozzle temperature.
...
Avoids nozzle temperature dip when fan is turned on.
2019-07-15 16:25:21 +02:00
8fb30f886a
octoprint stop fix
2019-07-15 14:30:21 +02:00
759d9f5a2e
small text edits
2019-07-15 11:41:16 +02:00
a3fde091ab
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
38ff944b03
Reorder EEPROM items to allow possible future grow for Sheets struct.
2019-07-10 21:03:30 +02:00
8985d2e26c
Fix fix EEPROM conflict.
2019-07-10 18:50:16 +02:00
6ed146c37c
Fix EEPROM conflict.
2019-07-10 18:41:12 +02:00
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound
...
new sound
2019-07-10 18:06:32 +02:00
333ade9aee
Remove non-existing function prototype.
2019-07-10 17:59:04 +02:00
7189f44bcd
Remove commented out defines.
2019-07-10 17:40:33 +02:00
e0f46f128d
Fix indentation.
2019-07-10 17:39:24 +02:00
4e7de776cd
Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore.
2019-07-10 17:07:00 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
3333d937ed
some improvements
2019-07-10 16:29:40 +02:00
9585789288
Merge pull request #1976 from NotaRobotexe/MK3_3.7.2_PP
...
dont fire power panic at normal power off
2019-07-10 14:19:00 +02:00
4e3bf276ec
Merge pull request #1984 from leptun/MK3_compile_error_fix_multiple_sheets_Windows
...
Fix compile error on Windows when multiple_sheets is merged
2019-07-09 19:28:35 +02:00
712fb1cceb
#undef EEPROM_SHEETS_BASE so this internal define for compile-time checking only is not used outside of eeprom.h
2019-07-09 19:19:59 +02:00
fcfc9ca95c
Merge pull request #1979 from DRracer/heatbed_noise_suppression
...
Heatbed noise suppression
2019-07-09 18:33:27 +02:00
dbc603d5f6
Fix compile error on windows
...
addresses issue #1965
2019-07-09 18:38:24 +03:00
898f6d9d8b
Fix EEPROM_Sheets_base overlay of EEPROM_NOZZLE_DIAMETER_uM.
2019-07-09 13:41:18 +02:00
cd1ea0a655
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 13:38:58 +02:00
4d535f1217
... incl. SupportMenu ;-P
2019-07-09 12:31:20 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
61566f7fb1
Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences.
2019-07-08 21:18:55 +02:00
a16de83535
heatbed audible noise suppression using short fast PWM pulses with
...
variable duty
2019-07-08 16:42:21 +02:00
9592460281
add old delay
2019-07-04 18:43:59 +02:00
a1a8945bee
more code editing
2019-07-04 15:31:44 +02:00
1f9dce9513
next almost 200B down
2019-07-04 13:36:02 +02:00
e77898d5dc
code edit
2019-07-04 13:21:27 +02:00
81b3b71cca
check eeprom inicialization
2019-07-03 19:37:11 +02:00
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
ff3c9d1a7c
dont fire power panic at normal power off
2019-06-28 11:25:56 +02:00
a59e7090ea
Increase version.
2019-06-27 17:32:40 +02:00
d344e514c4
Rename functions and macro to match with naming convention - remove 'P' where there is no pointer to progmem.
2019-06-26 15:51:58 +02:00
d879794922
Remove first parameter of macro menu_format_sheet_P_E, of function menu_format_sheet_P_E and menu_item_submenu_P as it was always called with the same parameter. Saves 66B of FLASH.
2019-06-26 15:47:06 +02:00
53dbcdd852
Display sheet name when adjusting Z. Costs 130B of flash.
2019-06-26 15:33:54 +02:00
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
20dd1110f6
Remove unused parameters of function _lcd_babystep(int axis, chonst char *msg).
...
Saves 24B of flash memory.
2019-06-25 19:43:10 +02:00
ebdeb99134
Add menu to show sheet live adjust Z value.
2019-06-25 18:55:25 +02:00
4058cd144b
add delay_keep_alive without updating lcd
2019-06-25 14:30:11 +02:00
3e9dc91cef
ifdef for mk2
2019-06-24 18:01:49 +02:00
b5168bd6c2
fan error fix
2019-06-24 17:30:56 +02:00
b67ec501b4
Add rename sheet menu.
2019-06-24 17:11:13 +02:00
e6fbac08ed
Move sheet selector to submenu.
2019-06-21 15:44:56 +02:00
19a474eaa5
Fix compiler warnings.
2019-06-20 18:00:29 +02:00
0a48082609
Add steel sheet profile selector.
2019-06-20 16:40:53 +02:00
89b578c899
Merge branch 'MK3' into multiple_sheets
2019-06-19 18:40:09 +02:00
524121141a
Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment.
2019-06-19 15:54:24 +02:00
6a272d83b1
Add compile time check for EEPROM stored varibles size.
2019-06-19 15:09:07 +02:00
64903e0ae8
Remove unused defines.
2019-06-19 14:27:02 +02:00
8b6629ad58
Fix comment grammar.
2019-06-18 20:00:02 +02:00
ae9ae95187
MMU: Filter IR sensor signal when detecting whether filament tip passes to heat break. Increase number of tries when loading filament to 3.
2019-06-18 19:15:16 +02:00
6cb85a455f
Update mmu.cpp
2019-06-18 15:08:47 +02:00
24cec4091b
Merge branch 'MK3' into sound
2019-06-17 17:28:19 +02:00
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode
...
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
2019-06-14 20:05:30 +02:00
b1df1fb1f1
Fix formatting. We are never using 2 space indentation. 4 spaces are preferred, tabulator is acceptable if surrounding code uses tabs.
2019-06-14 18:18:27 +02:00
367a28a5a8
Default to "Live Adjust Z" when longpressing during a print ( closes #1604 )
...
- Disable longpress action when homing or calibrating
- Default to Live Adjust during a print
- Retain "Move Z" otherwise
2019-06-14 11:44:06 +02:00
c5d130e763
Merge pull request #1914 from prusa3d/MK3_3.7.2
...
Increase version.
2019-06-14 09:39:41 +02:00
fee67d9451
Increase version.
2019-06-13 16:37:51 +02:00
55dc78546b
Merge pull request #1913 from mkbel/fix_spelling
...
Fix spelling.
2019-06-13 15:12:30 +02:00
25f0eb9a39
Fix spelling.
2019-06-13 15:01:54 +02:00
72f5e87c61
Merge branch 'MK3' into use_enum_class_2
2019-06-12 19:17:35 +02:00
1390d4e5b9
Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t.
2019-06-12 19:11:41 +02:00
5fcf760954
Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t.
2019-06-12 18:54:43 +02:00
51df6cdfdc
Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed.
2019-06-12 18:54:37 +02:00
cbb92860d0
Use first letter capital camel case for enum class members.
2019-06-12 18:54:32 +02:00
0401490cc1
Use first letter capital camel case for enum class members.
2019-06-12 18:54:25 +02:00
9ceba00426
Use first letter capital camel case for enum class members. Remove dependency of FanCheck values on TestError values as it is not used.
2019-06-12 18:53:09 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
6dd085bcc5
Use first letter capital camel case for enum class members.
2019-06-12 16:44:07 +02:00
e393d91b12
Use first letter capital camel case for enum class members.
2019-06-12 16:20:21 +02:00
cc80bfa020
Merge branch 'MK3' into use_enum_class
2019-06-12 16:04:26 +02:00
c7e1e73880
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 15:41:55 +02:00
94a5175980
Code size reduction - saved almost 2KB
2019-06-12 15:41:34 +02:00
8d388fa03a
Merge pull request #1911 from mkbel/layer1_cal_flash
...
Layer1 cal flash
2019-06-12 15:40:59 +02:00
49f172a7b9
Convert uint8_t cycle control varibles changed in previous commit to uint_least8_t to be potentially more portable.
2019-06-12 15:01:57 +02:00
b15bbaf177
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 14:58:15 +02:00
7ac098a135
Refactor. Put constants needed in functions inside fuctions to limit its scope.
2019-06-12 14:20:20 +02:00
2755a3733d
Document.
2019-06-12 14:15:58 +02:00
342954b88c
Refactor. Make constants producing first layer calibration square more clear. Note layer height discrepancy.
2019-06-12 13:31:17 +02:00
4f8ed7f123
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 10:31:09 +02:00
baa36ce740
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 09:58:42 +02:00
d528a53526
Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory.
2019-06-12 01:36:48 +02:00
60cc3d58ec
Use sprintf_P in first layer calibration. Save 30B of FLASH memory.
2019-06-11 20:00:49 +02:00
47a183e96e
Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory.
2019-06-11 19:49:56 +02:00
21f4669600
Make count_e() constexpr.
2019-06-11 19:22:08 +02:00
4effff9e99
Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory.
2019-06-11 18:56:29 +02:00
d21f256cd0
Remove duplicate calls of lcd_timeoutToStatus.start(), move !blocks_queued() && cmd_buffer_empty() condition to outer if, rewrite using switch statement. Save 487B of FLASH memory.
2019-06-11 18:26:59 +02:00
97a5d6b5f4
Make constants const.
2019-06-11 17:30:37 +02:00
9b1e3213ae
Variable lcd_commands_step doesn't need to be global.
2019-06-11 17:30:19 +02:00
58948cffcd
Code size reduction - saved almost 2KB
2019-06-11 17:23:01 +02:00
0c9121e99e
Use loop to enquecommand_P() in first layer calibration.
2019-06-11 17:08:56 +02:00
f20125a3e2
Code size reduction - saved almost 2KB
2019-06-11 16:24:40 +02:00
cb6a3e7e12
Merge pull request #1907 from DRracer/fan_check_error_fix
...
Do not allow resume printing if fans are still not ok
2019-06-11 15:12:48 +02:00
13c3ab14fa
test fan check error only when enabled by #ifdef
2019-06-11 15:05:40 +02:00
3e37150552
Do not allow resume printing if fans are still not ok
2019-06-11 14:53:10 +02:00
27145204ed
Use internationalized M117, but anyway the text is not shown.
2019-06-10 21:40:12 +02:00
4be8fa701e
Use loop to enquecommand_P() in first layer calibration.
2019-06-10 20:41:18 +02:00
bb980e2fca
sound edit, delete mute mode, add blind mode
2019-06-10 15:03:52 +02:00
28e7772421
Merge pull request #1886 from leptun/MK3_fix_load_filament_5
...
Fix Load Filament 5 for MMU2
2019-06-10 14:45:55 +02:00
327e6cd39b
Merge pull request #1889 from DRracer/fan_check_error_fix
...
Fan check error fix
2019-06-06 15:52:44 +02:00
0cf6bc0677
Merge pull request #1903 from mkbel/filament_runout_mk3_2
...
Filament runout mk3 2
2019-06-06 15:51:35 +02:00
83578c3389
documentation + minor code cleanup based on code review
2019-06-06 15:50:13 +02:00
1d8c24e8a9
"disable_z()" for Delta PSU IV
...
correction for (motor) mode switching
2019-06-05 19:22:04 +02:00
19351df8a7
Extracted computation of z_shift for M600 into a separate function to
...
improve readability. Surprisingly, also the code got shorter.
2019-06-05 18:34:26 +02:00
9c3bb14bae
remove function forward decl: fsensor_restore_print_and_continue_IR
...
revert LCD_BL_PIN change
2019-06-05 18:34:10 +02:00
aeed49a80e
Fix filament runout on optical filament sensors
...
Reworked the IR variant accordingly
Some code-size optimization in related functions
2019-06-05 18:33:41 +02:00
10247a28a3
Merge pull request #1896 from NotaRobotexe/power_panic
...
documentation for power panic
2019-06-05 16:10:04 +02:00
0cab2284ea
PFW-874 new firmware alert timeout
2019-06-05 15:48:10 +02:00
14270ac1f6
power panic documentation
2019-06-05 15:10:51 +02:00
d263728c37
documentation
2019-06-05 14:55:59 +02:00
33b2aa5e58
Merge pull request #1894 from NotaRobotexe/power_panic
...
Power panic Z axis fix
2019-06-05 13:34:21 +02:00
2c4e98dc27
power panic improvement
2019-06-05 13:12:08 +02:00
5985c0608e
Revert changes to pins_Einsy_1_0.h not related to the fan check error
...
fix
2019-06-03 09:02:27 +02:00
09fee4e64d
remove fan error simulation automaton
2019-05-31 11:30:30 +02:00
6755791778
Fix repeated fan error checking
2019-05-31 11:29:11 +02:00
adb5baa12b
Merge remote-tracking branch 'upstream/MK3' into MK3
2019-05-31 11:05:24 +02:00
ebfad55617
Merge pull request #1888 from mkbel/always_cut_independent
...
Always cut independent
2019-05-31 07:00:37 +02:00
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
e79c203c96
Do not always cut if it is not enabled from menu.
2019-05-30 23:04:06 +02:00
ccb649b1f6
Add always cut experimental / for testing feature.
2019-05-30 23:03:59 +02:00
18122049a6
Fix cut filament menu item labels.
2019-05-30 19:36:10 +02:00
878e866401
Fix Load Filament 5 for MMU2
2019-05-30 17:28:02 +03:00
e9c870e7a0
fix of fixof power panic
2019-05-29 20:33:22 +02:00
3b2cbc68d8
PFW-571 send PRN:4 instead PRN:1 while changing filament
2019-05-28 18:22:34 +02:00
1c619133a3
Merge pull request #1880 from NotaRobotexe/power_panic
...
PFW-828 add uvlo tiny z positio back
2019-05-28 14:29:13 +02:00
bcb6129c29
delete comment
2019-05-28 14:11:38 +02:00
8842d16832
add back uvlo tiny z positio
2019-05-28 13:50:21 +02:00
326c061d8c
testing pin 5
2019-05-27 18:27:24 +02:00
2f96badef4
Merge pull request #1870 from NotaRobotexe/power_panic
...
PFW-828 after power panic printer start print in the air
2019-05-27 17:13:08 +02:00
9c3b93f900
Merge pull request #1869 from DRracer/fix_mintemp_and_fsensor
...
Fix MINTEMP errors and fsensor runout
2019-05-27 16:32:22 +02:00
253087a4c5
Code cleanup
2019-05-27 16:18:21 +02:00
4d020d99f6
Code cleanup
2019-05-27 14:57:02 +02:00
f070a10904
edit
2019-05-27 10:10:24 +02:00
55a2d588f1
PFW-828 printing in the air after power panic
2019-05-24 18:30:58 +02:00
69455bfc75
PFW-828 fix printing in the air after power panic
2019-05-24 18:28:16 +02:00
098c0979ba
Merge pull request #1848 from MRprusa3d/PFW-853
...
recovery from "Stop()"
2019-05-24 09:54:07 +02:00
9cb0bc7bcf
Fix MINTEMP errors and fsensor runout
2019-05-24 08:46:44 +02:00
1399d7dcc8
support only for MK3/MK3S
2019-05-23 15:22:31 +02:00
df02030fe0
Merge pull request #1863 from DRracer/lcd20190523
...
Fix. menu texts and formatting - issues PFW-877 and PFW-879
2019-05-23 14:31:51 +02:00
63235625ab
pause printer by flag
2019-05-23 13:13:11 +02:00
e17f3f8405
change language files accordingly
2019-05-23 11:14:26 +02:00
da98977de3
Fix. menu texts and formatting - issues PFW-877 and PFW-879
2019-05-23 10:45:55 +02:00
a408f90659
recovery from "Stop()"
2019-05-18 21:28:59 +02:00
15ba17f110
Fix translator columns hint for Adjusting Z:
2019-05-16 17:30:15 +02:00
74d8c15b4f
Fix documentation.
2019-05-16 17:23:54 +02:00
dcfc6348ed
Fix documentation.
2019-05-16 17:22:47 +02:00
a453c6fc9d
Save 236B by improving functions in menu.cpp. Beware - the label now has
...
to come with a ':' as its last character. Changed language files along
with this commit too.
2019-05-16 16:43:44 +02:00
dad2065da6
Merge branch 'MK3' into rise_z
2019-05-15 16:37:17 +02:00
1f3877b221
Extract duplicate code into function. Saves 4B of flash.
2019-05-15 16:31:10 +02:00
fbc0c260b1
Merge pull request #1826 from ondratu/selftest_wizard
...
Selftest fan improvements
2019-05-15 13:43:48 +02:00
ebfc8c1c79
Fan autotest for swapping in Selftest
2019-05-15 10:10:46 +02:00
c851e158cc
Manual fan check menu have default (selected) option
2019-05-15 10:10:46 +02:00
1a78bd53ba
Fix compiler warning
...
sketch/Marlin_main.cpp: In function 'void marlin_wait_for_click()':
sketch/Marlin_main.cpp:9646:12: warning: unused variable 'busy_state_backup' [-Wunused-variable]
2019-05-14 19:11:46 +02:00
91e72a79f0
Fix compiler warning
...
sketch/Marlin_main.cpp:871:13: warning: unused variable 'ir_detected' [-Wunused-variable]
2019-05-14 19:07:50 +02:00
acfcd59369
Fix compiler warning:
...
sketch/menu.cpp: In function 'int menu_draw_item_puts_P(char, const char*, char)':
sketch/menu.cpp:184:1: warning: no return statement in function returning non-void [-Wreturn-type]
2019-05-14 18:32:40 +02:00
89fc9e7f92
sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive]
...
#define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
^
sketch/ultralcd.cpp:5926:5: note: in expansion of macro 'MENU_ITEM_FUNCTION_NR_P'
MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
2019-05-14 18:25:43 +02:00
66d20f0297
Fix code formatting (indentation).
2019-05-14 16:45:15 +02:00
4de93ca19c
Fix eject filament menu items numbering.
2019-05-14 16:43:33 +02:00
150787efbd
Generate menu item texts Cut filament <nr.> during runtime to conserve flash.
2019-05-14 16:25:29 +02:00
6495a8fa58
Decrease flash reserved for secondary language.
2019-05-14 16:10:04 +02:00
7c4f66181f
Generate menu item texts Load filament <nr.> and Eject filament <nr.> during runtime to conserve flash.
2019-05-14 15:47:25 +02:00
dddc1b84e6
Merge pull request #1825 from prusa3d/MK3_3.7.1
...
Increase version 3.7.1 final.
2019-05-13 17:29:30 +02:00
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500
...
Allow save of uStep resolution with M500
2019-05-13 17:08:34 +02:00
e93f043fee
Increase version 3.7.1 final.
2019-05-13 15:09:58 +02:00
bbd1b60229
Merge pull request #1437 from craiglink/memory-overrun
...
set array size correctly to 4
2019-05-11 03:01:52 +02:00
12b801fa1f
Merge pull request #1397 from jhoblitt/plumbing/sh-chmod
...
make all shell scripts executable
2019-05-11 02:37:09 +02:00
0a343d4d66
Merge pull request #1806 from NotaRobotexe/fw_check
...
check if firmware is on right type of printer
2019-05-11 02:11:54 +02:00
176b28bc83
Merge pull request #1813 from prusa3d/MK3_3.7.1
...
Enable watchdog for all variants.
2019-05-10 17:33:44 +00:00
a9d6ae296b
Enable watchdog for all variants.
2019-05-10 16:30:08 +02:00
2a39fad400
Merge branch 'MK3' into bugfixes
2019-05-10 13:43:36 +00:00
084c6f2700
Merge pull request #1805 from DRracer/MK3
...
PFW-844
2019-05-10 13:41:59 +00:00
5707d4b85c
Set all target hot ends to 0 deg. Celsius instead of just hotend nr. 0 to be more safe with custom modifications.
2019-05-10 15:27:25 +02:00
dc4f30530d
Fix a number overflow to last line of LCD when doing large extruder in
...
menu Settings -> Move axis -> Extruder
2019-05-09 13:44:35 +02:00
714fb23de6
Merge remote-tracking branch 'upstream/MK3' into MK3
2019-05-09 13:40:28 +02:00
e7dd5c60d3
check if firmware is on right type of printer
2019-05-07 18:10:44 +02:00
8692565cf0
Merge pull request #1802 from XPila/MK3
...
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-07 15:13:02 +00:00
f431d24762
Merge branch 'MK3' of https://github.com/DRracer/Prusa-Firmware into MK3
2019-05-07 16:17:14 +02:00
0124fbf9ee
Fix: display target extruder temperature on the main screen when doing
...
PID calibration
2019-05-07 16:15:42 +02:00
85806a0f38
variable bed pwm frequency fix (input value is 7bit, not 8bit)
2019-05-07 15:35:34 +02:00
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
58683da2fb
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-06 18:07:42 +02:00
e56be687bb
Merge pull request #1800 from XPila/MK3
...
return with exitcode 1 if any language not generated properly
2019-05-06 15:58:34 +00:00
1a0370e1c7
Make macro ON_MENU_LEAVE() usage similar to macros MENU_ITEM_BACK_P() and MENU_ITEM_FUNCTION_P().
2019-05-06 17:39:00 +02:00
fa1bdd6ab1
Lang - decreased reserved space for secondary language (10496 bytes)
2019-05-06 17:29:47 +02:00
ffbdb43881
Remove commented code
2019-05-06 17:26:42 +02:00
41a827fa00
Removed unused texts, increased reserved space to 0x2e00 (11776 bytes)
2019-05-06 17:24:06 +02:00
0794430208
Fix for linearity correction not being stored to EEPROM when doing MENU-
...
UP
2019-05-06 15:33:13 +02:00
1c9d134c62
return with exitcode 1 if any language not generated properly
...
fix - include system_timer.h
2019-05-06 15:29:57 +02:00
e5911c42da
limit printed menu text to max 18 characters
2019-05-06 12:44:36 +02:00
3852aa4275
Different secondary language reserved space for MK3 and MK25
2019-04-30 12:42:18 +02:00
177c123b4d
Merge pull request #1780 from MRprusa3d/PFW-841
...
"stop" immediately after "pause" patch
2019-04-29 14:49:49 +00:00
8fadbf1b44
Do not call watchdog reset from updateTemperaturesFromRawValues().
2019-04-29 16:41:38 +02:00
b93f37ee02
"stop" immediately after "pause" patch
2019-04-29 14:39:19 +02:00
18dec75b56
MK2.5 - watchdog enabled + test (command "D-1")
2019-04-29 13:19:59 +02:00
f16bea26e5
raise the Z axis before filament loading to nozzle on MMU2S
2019-04-25 17:39:09 +02:00
Marek Bel
NotaRobotexe
DRracer
Marek Běl
MRprusa3d
MRprusa3d
leptun
KDanielK
Yuri D'Elia
Ondrej Tuma
Robert Pelnar