b30ccbebaa
PF-build: improve storage of dependencies
...
Use an unversioned root to store dependencies, so that they can be cached more easily.
Do not re-download archives if the build environment has already been set up.
2022-12-17 15:05:43 +01:00
5594408aac
PF-build: Check for the correct python version in PF-build
...
We only use/support python3. Most distributions no longer ship an
unversioned "python" executable, so this check fails and recommends
broken behavior.
2022-12-17 15:05:38 +01:00
4dfedc62e3
Merge pull request #3834 from wavexx/travis_cache
...
CI: Cache dependencies
2022-12-17 15:01:07 +01:00
165b57399a
CI: Cache dependencies
...
Attempt to cache dependencies with the travis cache. This avoids
redownloading avr-gcc for each stage of the pipeline.
This /might/ improve the download failures we're seeing recently,
although the travis cache is also networked.
2022-12-17 14:08:15 +01:00
c5d406d12f
Fix interrupts not enabled during setup()
2022-12-16 16:46:08 +01:00
eb8ec9f8b9
If an old firmware is detected, make sure the protocol is actually stopped
...
The printer shouldn't continue endlessly asking for a version if an old MMU is detected.
Also if the protocol is supposed to be turned off, it
shouldn't be sending S0 queries.
2022-12-16 16:23:19 +01:00
9f3f0baa47
mmu: Use strncpy when possible
...
Since tmp is always null-terminated we can save some time compared to a
memcpy call.
2022-12-16 16:21:59 +01:00
b3b9778341
mmu: Silence repeated S0 requests
...
Update "S0" CRC on replies so that the message is properly silenced.
2022-12-16 16:21:59 +01:00
78cf51274f
mmu: Embed the newline in MMU2_ECHO_MSG/MMU2_ERROR_MSG
...
This allows to redefine both macros to silence debugging messages, since
we can't redefine the base SERIAL_ECHO.
2022-12-16 16:21:59 +01:00
5f2f6dde13
array<>::size should return constexpr expression
...
This allows to size buffers at compile time (matches c++11 behavior).
2022-12-16 16:21:59 +01:00
2e7c237a17
Cleanup: remove automatic parameter from unload_filament()
...
In M600 and M702, the Z-lift is taken care of outside this function
so it makes no sense to have a Z-lift within unload_filament()
Only exception to this is in the wizard, there I moved the Z-lift to
happen before we start heating the nozzle.
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2022-12-16 16:20:09 +01:00
090c72367d
Minor Fix for PR2235
...
Shorten message to c=12 as some translation of `Yes/No` are 4 chars long
2022-12-16 16:10:15 +01:00
9428064a9e
Remove unused community translations
2022-12-16 16:06:31 +01:00
d43a7da20d
fix watchdog not getting disabled on user app boot
2022-12-16 16:01:29 +01:00
100dc2934b
Shorten French translation
2022-12-16 15:59:37 +01:00
74545e2133
Fix `µ` character shown on translations
2022-12-16 15:59:37 +01:00
c05ac535be
TM: reset fan measuring state when changing speed
...
Ensure that fan checks are reset and use the new speed at each step of
the calibration.
This also gives extra time to the fan to ramp-up from a cold start,
when a fancheck could previously start right *after* the speed change.
Should fix #3791
2022-12-16 15:30:30 +01:00
d80e32fa31
retrigger build
2022-12-16 12:55:30 +01:00
3f6089f2c1
More documentation for pins file
2022-12-16 12:29:59 +01:00
e8c8945650
Disable the watchdog early in the program
2022-12-16 12:25:44 +01:00
451f601697
Fix MK2.5 softReset()
2022-12-16 12:10:47 +01:00
001876a807
Parenthesize IS_SD_PRINTING defensively
2022-12-15 08:13:38 +01:00
3066fd1db3
Replace two expressions with cmd_head
2022-12-15 08:13:02 +01:00
a588a5f695
Allow M310 to bypass the Stopped state for recovery
...
Since M310 cannot change the heaters, allowing M310 S0 (and changing
parameters) allows to recover a usb-controlled printer which has been
locked-out due to bad model settings.
2022-12-14 13:47:11 +01:00
c7865a83f2
Keep a pointer past the line number in cmdqueue
...
This allows to skip line numbers transparently and perform faster
checks on the actual command to process.
2022-12-14 13:47:11 +01:00
5c4ec5dd4f
TM: Do not lockout the menus on thermal errors
...
This prevents the ability to run gcode from the SD card.
In a thermal error with faulty values, and without serial access, this
is the only way to process an M310 instruction and recover.
2022-12-13 18:38:26 +01:00
36575a4f83
Restore the previous model state when performing a nozzle change
...
Do not force-enable the model if it was previously disabled.
2022-12-12 20:17:56 +01:00
c5ec77a1ce
wizard: Allow finishing the calibration through menus
...
If the wizard is interrupted during model calibration, allow the
menu to mark "temperature model" calibration as complete.
2022-12-12 18:25:17 +01:00
0c042440ee
eeprom: Document new calibration state
2022-12-12 18:25:17 +01:00
118b39da39
wizard: Rework the thermal model calibration logic
...
- Correctly sequence the enqueued commands in order to check for the
real calibration result.
- Perform autocalibration with self-check enabled.
- Only save/continue the wizard if autocalibration succeeds.
2022-12-12 18:25:07 +01:00
38d893589f
selftest: Handle thermal errors in lcd_selfcheck_check_heater
...
- Simplify lcd_selfcheck_check_heater loop
- Check for/abort on Stopped (indicating a thermal failure).
2022-12-12 18:24:58 +01:00
4e7c830661
Remove M999 remnants
...
This was already removed in fc10ca3146
2022-12-12 17:52:48 +01:00
249be543fc
TM: Restore all original values if autotune fails
...
- Ensures repeated autotune attempts with self-check can't succeed due
to different starting conditions.
- Allows for a simpler workflow during selftest and wizard if autotune
fails.
2022-12-12 17:52:48 +01:00
2051809e2f
TM: Store only the last autotune result state
...
- Remove tm::valid and temp_model_valid as it's a duplicate of the
calibrated() state.
- Add temp_model_autotune_result() for future use.
2022-12-12 17:52:48 +01:00
324e501b18
TM: Set default resistance levels for MK3/MK3S
...
Provide average calibrated values for all fan levels for MK3/MK3S
variants and enable the model by default.
This ensures the calibration step is not skipped unless explicitly
disabled.
Force-clear fan values during autotune to restore the previous
calibration behavior, as fan resistance levels can be too big and
prevent the autotune-with-selfcheck to fail.
2022-12-12 17:52:48 +01:00
877c0bd35c
Fix potential buffer overflow in LCD messages
2022-12-12 17:52:48 +01:00
e2f1bfe506
TM: Remove unnecessary display comments
...
Favor code readability
2022-12-12 17:52:48 +01:00
4d87f65b68
Merge pull request #3443 from gudnimg/m109-turn-off-fan
...
Turn off print fan while resuming print from RAM
2022-12-12 15:20:20 +01:00
d84e497007
Merge pull request #3805 from 3d-gussner/MK3_Fix_M862.4_strict
...
MK3: Fix `M862.4` with [strict] mode
2022-12-12 12:38:15 +01:00
b4a061e70a
Merge pull request #3779 from gudnimg/fix_lcd_wizard_load_mmu
...
Don't show full screen message meant for single color setup
2022-12-10 11:27:48 +01:00
613ea290f5
Add a comment
2022-12-10 10:04:17 +00:00
9ed46df97f
Don't show full screen message meant for single color setup
...
load_filament_to_nozzle will show a more precise full screen message when an MMU is used.
2022-12-10 10:00:58 +00:00
70451b6bd3
Turn off print fan while restoring print from RAM
2022-12-10 09:53:43 +00:00
40cc6dcb6d
Merge pull request #3783 from leptun/enable_PRUSA_SN_all_variants
...
Allow "PRUSA SN" to print the SN in eeprom on all variants
2022-12-09 14:51:57 +01:00
5d80e544ea
Merge pull request #3796 from Hauzman/MK3_Romanian_translation
...
Update Ro Translation
2022-12-09 14:48:14 +01:00
1e39012953
Merge pull request #3793 from gudnimg/PFW-1453
...
PFW-1453 Stop Print: Don't unload if FINDA is not triggered
2022-12-09 12:54:16 +00:00
19b6590095
Update Ro Translation
2022-12-09 11:00:34 +01:00
68c5cdce1c
Merge pull request #3780 from gudnimg/stop-print-optimisations
...
optimisation: Improve Stop Print menu
2022-12-08 19:41:52 +01:00
25b5e00652
Merge pull request #86 from wavexx/simple_checks
...
Simplify firmware/gcode version comparisons
2022-12-08 19:04:59 +01:00
a8b8085d22
Merge pull request #3811 from wavexx/build_drop_unused_option
...
cmake: Remove unused SECONDARY_LANGUAGES option
2022-12-08 18:51:53 +01:00
Yuri D'Elia
Yuri D'Elia
Alex Voinea
Guðni Már Gilbert
3d-gussner
Alex Voinea
Hauzman