2f8b2dcad4
Add LCD output during xyz calibration
2022-12-20 14:30:06 +01:00
7907e14cbf
Resync planner position upon exiting xyzcal
...
Split the planner sync code out of planner_abort_hard() so that we can
independently resync the planner position from the counters.
This is needed in xyzcal as we directly modify the stepper counters
(bypassing both planner and stepper).
Call this new function instead of planner_abort_hard() when leaving, so
that motion can resume in the middle of the gcode_M45 instruction.
2022-08-23 17:25:24 +02:00
35708a61fe
No longer disable temperature management in xyzcal
...
We already disable the heaters upon entering, and the new temperature
isr doesn't perform any direct movement until we return to the main
loop.
This allows us to remove direct control of the soft_pwm interrupt from
the header, which is dangerous.
2022-08-23 17:19:23 +02:00
383319dbac
Rename temperature_isr to soft_pwm_isr
2022-07-25 17:30:21 +02:00
bd57e00448
Implement an online crash dumper for MK2.5 boards
...
When XFLASH is not available, allow users to request _online_ crash
dumps by using D23 (since these require active user cooperation).
Once enabled, instead of just rebooting, dump memory directly to
the serial.
As similarly done with EMERGENCY_DUMP, we have two features that can be
enabled:
EMERGENCY_SERIAL_DUMP: enables dumping on crash after being requested
MENU_SERIAL_DUMP: allow triggering the same manually through the support
menu.
2021-06-12 13:37:20 +02:00
c375610668
Move "WDR dump" inside EMERGENGENCY_DUMP
2021-06-10 17:02:41 +02:00
1e786c7f55
WDR crash initial
2021-06-09 13:59:26 +03:00
5a91e1de4d
Calibration: fix checking of scan of calibration points
...
PFW-1223
2021-04-14 06:25:18 +02:00
99206884b5
Calibration: detect biased PINDA and retry calibration
...
PFW-1223
2021-03-12 05:04:49 +01:00
eb4cf1a77f
Calibration: return XY back after Z search
...
PFW-1217
2021-03-10 10:27:57 +01:00
90d22a376d
Remove unused vars in xyzcal.cpp
2021-01-22 17:50:08 +01:00
4dec171266
Reduce code by 104 bytes in xyzcal.cpp
...
Extract CLAMP_median into a non-inline function.
The extra instructions to call that function do not matter from the
speed perspective
2021-01-22 17:13:28 +01:00
defbaa6ff8
Merge branch 'MK3' into PFW-1186
2021-01-22 12:46:25 +01:00
735895c6bc
Use fabs
2021-01-14 16:38:34 +01:00
ca4e638ea2
Don't use extrusion in XYZ calibration
2021-01-14 13:19:30 +01:00
9867ecd3f9
Reduce unnecessary code
2021-01-13 13:59:20 +01:00
21d6f970ef
Fix build
2021-01-12 16:26:46 +01:00
f3faf651c5
Move down before scanning
2021-01-12 16:12:34 +01:00
9dceb488b6
Revert double scanning
2021-01-12 16:04:04 +01:00
546812294e
Clean serial output
2021-01-12 00:34:28 +01:00
180af46fe4
Try double height
2021-01-12 00:27:06 +01:00
2981b9e9c5
OctoPrint needs new lines
2021-01-04 14:59:12 +01:00
cc9e7b9376
Fix comments, remove unused
2021-01-04 13:01:06 +01:00
49d57ed621
Median dynamic circle
2020-12-30 17:02:31 +01:00
a9fd09ca3f
Implement median
2020-12-30 15:15:17 +01:00
13fefaa1bf
Fix typo
2020-12-30 15:01:32 +01:00
03b87ae68b
Add 8 pixel circle pattern
2020-12-30 13:08:47 +01:00
c14e725574
Fix moves
2020-12-29 18:27:33 +01:00
c2ab8785f4
Revert Manhattan
2020-12-29 17:31:34 +01:00
c1e6567461
Fix step axis coding
2020-12-29 17:17:32 +01:00
922769cefb
axis -> axes
2020-12-29 17:14:18 +01:00
a01dfe26fe
Add Manhattan movement
2020-12-29 17:13:11 +01:00
6461206e08
Fix direction setting
2020-12-29 14:19:05 +01:00
b6e78bf900
Fix direction
2020-12-29 14:08:30 +01:00
c11e8654da
Revert both directions, refactor code
2020-12-29 12:39:35 +01:00
e86ba5e26d
Scan only once
2020-12-28 16:45:39 +01:00
80e32ce1a5
Turn off speed optimization due to MK2.5
2020-12-25 15:27:42 +01:00
e6eb3be247
Set jerk = 1, accel. = 1000
2020-12-23 16:56:04 +01:00
979525f028
Add more restarts
2020-12-22 19:34:12 +01:00
25d138d198
Revert max.speed
2020-12-22 15:10:01 +01:00
e24a763e46
Cleanup
2020-12-22 14:45:55 +01:00
8df2eccf45
Remove defines and unused vars
2020-12-22 14:36:37 +01:00
25d6e24778
Add comments
2020-12-22 14:16:20 +01:00
90c8045f7d
Clean the code
2020-12-22 13:59:50 +01:00
20659ec818
Add debug output
2020-12-22 12:51:22 +01:00
c397e9249a
Restart scanning
2020-12-21 19:33:36 +01:00
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
744763f0a9
Fix diagonal movement
2020-12-21 17:34:54 +01:00
de23a845b4
Remove unused
2020-12-21 15:53:51 +01:00
3c9168f8f6
Optimize diagonal
2020-12-21 15:52:25 +01:00
3d-gussner
Yuri D'Elia
Voinea Dragos
DESKTOP-AFI832L\admin
D.R.racer
DRracer