fc270a356a
Fix indentations
2021-02-15 12:50:40 +01:00
4c977cc335
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-03 18:28:18 +02:00
57e730c80c
Merge remote-tracking branch 'vojtech-pavlik/MK3' into MK3_Test_PRs
...
Fix merge issues PR1900
2021-02-02 13:49:34 +01:00
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1
...
Farmers' requests
2021-01-25 11:15:44 +01:00
514321f2ce
Remove farm_no completely + reuse prusa_stat_farm_number() where
...
applicable
2021-01-25 11:09:28 +01:00
a9d8ddc89c
Farmers' requests 1
...
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")
Both requests are highly welcome, since they allow for lowering the code
size by >1KB
PFW-963, PFW-927
2021-01-19 09:58:02 +01:00
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu
...
Disable filament checks inside the Move -> Extruder menu
2021-01-11 07:42:25 +01:00
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
62c36f718b
Add SuperPINDA support for MK2.5/S
...
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
- If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
- If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
- If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-23 20:56:50 +01:00
6bc59197ad
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2020-09-12 08:28:13 +03:00
22a8c18551
Merge pull request #2784 from leptun/PFW-1134-ALTFAN_KILLSWITCH
...
altfan killswitch
2020-08-06 08:15:42 +02:00
a8ce9358e5
Avoid redundant temperature error strings
...
Factor-out MIN/MAXTEMP [BED/AMB] out of the error message, which is now
built at runtime instead.
Introduce two missing ultralcd functions lcd_setalertstatus and
lcd_updatestatus to handle regular strings.
246272 -> 246084 = 188 bytes saved
2020-08-01 17:47:42 +02:00
ec6a20971e
Add experimental menu to HW_setup
2020-07-29 11:23:24 +03:00
a95feb56d9
ALTFAN override
2020-07-20 19:35:25 +03:00
d53c55ce64
Disable filament checks inside the Move -> Extruder menu
2020-06-24 16:10:32 +02:00
d1865fc59a
MK3s IR sensor improvement ( #2698 )
...
* Update EEPROM_FSENSOR_PCB documentation
* Update IR sensor check
* Rename IR messags and add UNKNOWN state
* Update code to use new messages
* To be continued
* Move fsensor related things from ultralcd.h to fsensor.h
* Use defined Thresholds
* IR sensor auto detection "0.3 or older" and "0.4 or newer" when trigger status changes.
Typo fixes
Doxygen documentation
* Cleanup spaces
* Revert PF-build.sh changes
* re-add space in messages
* revert doxygen snytax
* Remove double _Undef
* Fix indentation and doxygen syntax
* Fix indentation
* Better message handling
* Fix indentation
* Fix indentation
* More indentation fixwa
* Extract common code into manage_inactivity_IR_ANALOG_Check
Saves ~60B of code
* Revert indentation changes on fsensor.cpp
* Keep the selftest IR sensor part disabled
Everything shall happen at runtime
* Fix indentation fsensor_update
* Fix another misleading indentation in fsensor_update
Co-authored-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-06-03 16:14:56 +02:00
b1a83c8add
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2020-05-19 16:37:47 +03:00
67e9b4c096
IR fsensor fixes ( #2632 )
...
* MK3S IR sensor detection and safe operational range fix
* debug, change of fsensor_IR_check behavior
* more doc + disable debug print voltage
* fix displaying MSG_04_OR_NEWER and MSG_03.... kudos to @ovariludovit
* better handling of fsensor not responding scenario
2020-04-28 10:20:21 +02:00
baaa372a56
Rephrase texts for fsensor detection and cleanup ( #2630 )
...
* Rephrase texts for fsensor detection and cleanup
* fsensor msgs only for MK3S
2020-04-24 19:46:54 +02:00
0e25eaee8f
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2020-04-19 16:02:11 +03:00
818efb4fa2
updated messages + slight refactoring to save some bytes
2020-03-26 15:07:48 +01:00
34ac2917ae
fix. warning "Macro expansion producing 'defined' has undefined
...
behavior"
update screen layout comments
2020-03-26 14:40:47 +01:00
2a9504b20a
!!! for testing only !!!
...
filament sensor auto-detection
2020-03-02 19:07:23 +01:00
ec5e54de25
state fixing
2020-03-02 17:52:25 +01:00
7028583e9b
Merge branch 'MK3_ShellSort' into MK3_NEW_SD_COMPILATION
2020-01-08 16:27:31 +02:00
1ba89b9689
Merge branch 'MK3' into MK3_ShellSort
2020-01-07 14:18:31 +02:00
f0f7db57ea
Fist attempt at "saved position SD menu"
2019-12-17 00:45:25 +02:00
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings
...
Fix "LANG_MODE 0" warnings
2019-12-15 09:29:27 +01:00
103e29d38a
Merge branch 'MK3' into MK3_ShellSort
2019-11-29 16:52:20 +02:00
960f4a88ed
Status bar, lcd optimization, compile warning fix
2019-11-26 13:36:28 +02:00
6e2793566c
Merge branch 'MK3' into PFW-943
2019-11-18 14:43:46 +01:00
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
3628d893ee
Remove duplicate preheat menu.
...
Known limitations: farm_mode missing, wizard_active missing, cooldown missing, ASA missing, print fan missing.
2019-08-26 20:11:52 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
5fdaead663
Fix language related warnings in LANG_MODE 0
2019-07-29 15:55:42 +03:00
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873
...
GUI updates
2019-07-17 14:49:07 +02:00
034cbff10a
GUI updates
2019-07-16 20:10:49 +02:00
fecccf50e5
Remove duplicate prototypes from ultralcd.h. Make functions unreferenced outside lcd.cpp static. Disable unused functions by preprocessor to suppress warnings.
2019-07-16 20:01:49 +03:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
3333d937ed
some improvements
2019-07-10 16:29:40 +02:00
e54497d802
added new function belt test under calibration menu
2019-06-20 00:09:55 +02:00
1390d4e5b9
Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t.
2019-06-12 19:11:41 +02:00
5fcf760954
Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t.
2019-06-12 18:54:43 +02:00
51df6cdfdc
Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed.
2019-06-12 18:54:37 +02:00
cbb92860d0
Use first letter capital camel case for enum class members.
2019-06-12 18:54:32 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
c7e1e73880
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 15:41:55 +02:00
94a5175980
Code size reduction - saved almost 2KB
2019-06-12 15:41:34 +02:00
58948cffcd
Code size reduction - saved almost 2KB
2019-06-11 17:23:01 +02:00
5494f23942
M0/M1/M117 fix: Add new CUSTOM_MSG states.
...
When the printer prints from a SD card, the display of progress messages
and filename takes precedence over CUSTOM_MSG_TYPE_STATUS messages used
by M0/M1/M117. Let's introduce two new CUSTOM_MSG states, one that
overrides the SD status while waiting in M0/M1 (M0WAIT) and one that
ensures the message will be displayed in at least one screen update
(MSGUPD).
2019-06-06 14:25:06 +02:00
9cb0bc7bcf
Fix MINTEMP errors and fsensor runout
2019-05-24 08:46:44 +02:00
89fc9e7f92
sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive]
...
#define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
^
sketch/ultralcd.cpp:5926:5: note: in expansion of macro 'MENU_ITEM_FUNCTION_NR_P'
MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
2019-05-14 18:25:43 +02:00
1f131f66e0
print parameters checking
...
nozzle diameter
2019-03-14 00:36:56 +01:00
b20d9171b6
Merge remote-tracking branch 'upstream/MK3' into 7x7
2019-03-12 11:47:17 +01:00
42036270cf
Merge pull request #1619 from MRprusa3d/PFW-795d
...
better autoLoad II
2019-03-12 11:44:30 +01:00
3388444b6c
better autoLoad II
...
autoLoad inhibit if Support::ExtruderInfo(@MKx)/SensorInfo(@MKxS)-menu is selected
2019-03-11 20:43:07 +01:00
819a91ab1e
switching stealth/normal mode for mmu in settings menu and tune menu
2019-03-11 12:33:22 +01:00
9dde8c4732
Merge pull request #1591 from MRprusa3d/PFW-795c
...
better autoLoad
2019-03-04 15:31:04 +01:00
b02ca18c93
better autoLoad
...
autoLoad inhibit if Support::ExtruderInfo-menu is selected
2019-03-04 12:52:35 +01:00
22c0d6e230
Merge pull request #1577 from mkbel/add_cut
...
Add MMU cut filament
2019-03-01 14:53:12 +01:00
815231bc26
Add MMU cut filament menu.
2019-02-26 17:58:00 +01:00
ff35119ef3
preHeat @ filament management
...
another funcionality III / autoLoad
2019-02-26 17:33:37 +01:00
d5c5ed55eb
Change formatting.
2019-02-25 11:12:39 +01:00
da0867cfc5
preHeat @ filament management
...
another funcionality
2019-02-20 03:01:33 +01:00
ef1f82627e
preHeat @ filament load / unload / autoLoad / MMU
...
MMU options added
2019-02-13 23:53:00 +01:00
a53d150903
preHeat @ filament load / unload / autoLoad
...
autoLoad option added
2019-02-06 01:58:05 +01:00
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs
...
lang update
2018-11-05 10:38:29 +01:00
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
73794b56cf
MeshBed Leveling Fail
...
Z-leveling after MeshBed leveling failing
2018-11-02 23:03:14 +01:00
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
a0e4acead3
lang - removed unused code and some service messages changed to "not translated"
2018-11-01 14:07:16 +01:00
e80af46503
load to nozzle and Tx and Tc codes: intial version
2018-10-31 21:48:05 +01:00
635a1b4cd8
Add possibility to to select preheat temperature when unloading filament in first layer calibration wizard.
...
Known limitations:
During filament eject, menu is shown for some moment.
2018-09-14 18:29:14 +02:00
fe30e58fb5
Add possibility to unload filament from wizard before first layer calibration, if it is not PLA.
...
Known limitations:
Preheat temperature other than PLA can not be selected.
During filament eject, menu is shown for some moment.
2018-09-14 16:06:25 +02:00
d14822b22f
Give wizard states human readable names. Use uint8_t as underlying type - saves 20B of FLASH memory.
2018-09-13 16:37:41 +02:00
13b67f0e0a
Add Cancel item into PLA filament selection menu initiated by first layer calibration with MMU.
2018-09-11 22:33:13 +02:00
19a1ccdc76
Rename choose_extruder_menu() to choose_menu_P(), add parameters to make it reusable.
2018-09-11 16:51:00 +02:00
920d828833
Rename lcd_sdcard_pause() to lcd_pause_print() to reflect, that also USB printing could be possible to pause. Unite it with pause_print() and use new (immediate) pause mechanism in all places where old mechanism was used. Rename resume_print() to lcd_resume_print() and make it global, unite it with lcd_sdcard_resume() and use it also in place, where lcd_commands_type = LCD_COMMAND_LONG_PAUSE_RESUME was used. Remove LCD_COMMAND_LONG_PAUSE_RESUME lcd_command_type. Remove unused pause_lastpos[].
2018-09-06 08:43:54 +02:00
af08e16426
Use stop_and_save_print_to_ram() and restore_print_from_ram_and_continue() pair to pause print from menu. Move declaration of those functions to marlin.h. Move declaration of FSensorStateMenu to ultralcd.h.
...
Known limitations: Filament is not retracted, extruder is not lifted in Z and moved to rear left corner in XY. Nozzle heating is not turned off nor restored. Unused code is not removed.
2018-09-04 08:13:56 +02:00
adde0d3944
Merge branch 'prusa3d_MK3' into MK3_dev
2018-08-28 17:31:12 +02:00
3e2cb72695
Merge branch 'MK3' into auto_deplete_2
2018-08-28 11:01:30 +02:00
7aadb2f660
Fix compile time error: default argument given for parameter 2 of int8_t lcd_show_fullscreen_message_yes_no_and_wait_P
2018-08-27 20:57:57 +02:00
b08ae95568
Rename autoDeplete to lcd_autoDeplete and make it global. When filament runs out, call M600 AUTO if lcd_autoDeplete is enabled. Shorten finda polling period to 300 ms.
2018-08-27 19:36:54 +02:00
3b3d6ab472
Merge branch 'MK3' into MK3_dev
2018-08-21 17:56:34 +02:00
fd9516f520
Status screen - status message logic simplification
...
added definitions of custom_message_type values
removed flag custom_message (previous solution maybe caused displaying of empty status line)
fixed in Marlin_main.cpp code "custom_message = _T(MSG_TEMP_CALIBRATION)"
2018-08-19 18:34:57 +02:00
f1ad1d22ba
Menu lcd_adjust_bed fixed (Bed level correction, PFW-499)
2018-08-19 13:59:33 +02:00
ac62117d6b
Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev
2018-08-13 19:38:55 +02:00
923a06c164
menu data shared memory re-design
...
+code cleaning
2018-08-10 02:59:49 +02:00
e06e19edf5
Fix showing calibration results.
...
Messages:
_i("XYZ calibration failed. Bed calibration point was not found.")
_T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
_i("XYZ calibration failed. Front calibration points not reachable.")
_i("XYZ calibration failed. Right front calibration point not reachable.")
_i("XYZ calibration failed. Left front calibration point not reachable.");
were never shown.
Fix compiler warnings:
sketch/ultralcd.cpp:3476:19: warning: comparison is always false due to limited range of data type [-Wtype-limits]
sketch/ultralcd.cpp:3478:26: warning: comparison is always false due to limited range of data type [-Wtype-limits]
2018-08-07 15:46:23 +02:00
468873ec68
MMU2 - removed conditional translation for SNMM_V2, new module mmu
2018-08-02 18:54:00 +02:00
ef8921d45e
Fix 10 compiler warnings of type: sketch/menu.cpp: In function 'void _menu_edit_int3()':
...
sketch/menu.cpp:272:51: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
#define _menu_data (*((menu_data_edit_t*)menu_data))
2018-08-01 22:43:36 +02:00
04d0178150
automatic M600 initial version
2018-07-31 12:24:22 +02:00
77cc55ed76
Merge pull request #951 from PavelSindler/use_timer
...
Use timer
2018-07-24 09:31:45 +02:00
88cce94cf9
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
...
This reverts commit 77426b563a
2018-07-23 13:35:38 +02:00
efd03b426f
final edits to fit changes on upstream
2018-07-23 09:14:22 +02:00
565a6db3e4
use timer class
2018-07-22 16:26:12 +02:00
33f9af65c8
merge with upstream/MK3
2018-07-17 16:36:53 +02:00
19a72ef9eb
LCD menu optimalization - LiquidCrystal_Prusa removed
2018-07-16 23:23:15 +02:00
e22d204e8e
LCD menu optimalization - print functions
...
+removed unused code
2018-07-16 19:29:27 +02:00
fd3fc31304
LCD menu optimalization - conversion functions - source separation
2018-07-16 17:23:35 +02:00
b6223d5623
LCD menu optimalization
2018-07-16 04:13:26 +02:00
268d2634f0
LCD menu optimalization - lcd and menu
...
removed unused code and conditional translation
2018-07-16 02:13:52 +02:00
39bb855333
LCD menu optimalization - menu_item_edit_int3
...
MenuStack removed
FILAMENT_LCD_DISPLAY and ENCODER_STEPS_PER_MENU_ITEM removed (unused)
EXPERIMENTAL_FEATURES menu removed
2018-07-15 18:37:59 +02:00
1ad49dc5e9
first working version
2018-07-10 10:45:45 +02:00
0cf7d12ae3
New ML support - lcd optimalization
...
lcd_puts_P and lcd_printf_P functions
LineFeed implemented in LiquidCrystal_Prusa
2018-06-10 22:06:00 +02:00
fcfb4cdcae
New ML support - menu tunning, startup
...
+config headers (bool - true/false replaced with 0/1)
+fixed include hierarchy
+removed comments
2018-06-10 16:04:32 +02:00
5de0a6437d
New ML support - W25X20CL - lang switching
...
+removed unused code
2018-06-09 23:49:26 +02:00
739de5224e
Merge branch 'MK3' into MK3-new_lang
2018-06-08 14:38:00 +02:00
bd1e410228
New ML support - W25X20CL external spi flash support
2018-06-08 00:20:28 +02:00
01af8a806b
Merge branch 'MK3' into Use_Timer
2018-06-05 19:03:11 +02:00
07a7ce1acf
Remove unused lcd_ping_allert().
2018-05-11 15:09:27 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
27cc5e51c3
removed duplicit declaration of prusa_statistics function
2018-03-13 19:12:36 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
c5175e97ec
Pinout, conditional translation and variant file for MK2
2018-02-21 15:19:34 +01:00
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
2018-02-06 17:01:09 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
2170c1bbe7
timeout to status prolonged, no timeout allowed when MSG_WIZARD_RERUN
2017-11-23 15:46:10 +01:00
5e4236dd2e
selftest for axis improved (better code readibility) and no crash triggered
2017-11-16 18:02:11 +01:00
2199c84ec9
wrapper function for selftest
2017-11-15 16:40:35 +01:00
eda0c6bd39
english version of xyz: place/remove steel sheet; wait for cooling down removed,
2017-11-13 17:09:26 +01:00
fbbcc27f1a
X max lowered to 250, XYZ/Z calibration: Z top coordinate changed, changes in xyz cal. because of stell sheet, still not final version
2017-11-12 11:30:06 +01:00
2e68770e62
initial version - messages missing (will not compile)
2017-11-07 16:49:04 +01:00
d1a065881b
fan error: long pause is used during print, resuming print resets error flag; stop print used during heating phase
2017-09-22 20:43:30 +02:00
a53428835a
fan error improvements
2017-09-22 18:22:21 +02:00
6eb57da770
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-21 15:20:02 +02:00
3d-gussner
Alex Voinea
DRracer
D.R.racer
Yuri D'Elia
MRprusa3d
MRprusa3d
Marek Bel
NotaRobotexe
Renzo
Vojtech Pavlik
PavelSindler
PavelSindler
Robert Pelnar