78534f3b48
Start at the first segment, not the last segment
2022-08-24 20:19:26 +03:00
671519caf3
Optimize by hand since the lto is still stooopit
...
saves ~100B
2022-08-24 20:19:26 +03:00
b27c8b50e0
Fix power panic handling
2022-08-24 20:19:26 +03:00
05bd1ba57f
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
2e677ea3ee
Merge pull request #3569 from leptun/fix_card_removed
...
Fix "Card removed" on startup
2022-08-24 19:17:24 +02:00
0933fdb6fe
Merge pull request #3552 from wavexx/temp_model_check
...
Thermal Model protection
2022-08-24 19:16:48 +02:00
ef8be4dfca
Fix "Card removed" on startup
2022-08-24 20:10:09 +03:00
f2f136e014
Use timer3 instead of timer5 on miniRambo
2022-08-24 10:18:45 +03:00
7907e14cbf
Resync planner position upon exiting xyzcal
...
Split the planner sync code out of planner_abort_hard() so that we can
independently resync the planner position from the counters.
This is needed in xyzcal as we directly modify the stepper counters
(bypassing both planner and stepper).
Call this new function instead of planner_abort_hard() when leaving, so
that motion can resume in the middle of the gcode_M45 instruction.
2022-08-23 17:25:24 +02:00
35708a61fe
No longer disable temperature management in xyzcal
...
We already disable the heaters upon entering, and the new temperature
isr doesn't perform any direct movement until we return to the main
loop.
This allows us to remove direct control of the soft_pwm interrupt from
the header, which is dangerous.
2022-08-23 17:19:23 +02:00
7cd888cd0a
Update documentation of ThermalStop()
2022-08-21 15:22:46 +02:00
b672be90b2
Do not overwrite saved values if TM error occurs while paused
2022-08-21 14:53:42 +02:00
d8d085287e
Re-enable bed temperature automatically for transitory errors
2022-08-21 14:49:12 +02:00
30dccb3252
Switch to ATOMIC sections instead of cli/sei/CRITICAL_SECTION
2022-08-21 14:49:12 +02:00
ee12cbd58e
Do not prompt on M115 if FW version check has been disabled
...
As done for M862.4, do now show an upgrade prompt if FW version check as
been disabled in the Settings -> HW Setup -> Checks menu.
2022-08-20 16:55:32 +02:00
3ebd8b88a4
Merge pull request #3486 from gudnimg/gudni-optimisation
...
Flash optimizations in loop() and status screen menu
2022-08-19 17:21:17 +02:00
0a8d2a3224
Merge pull request #3456 from wavexx/filament_load_consistency
...
Cleanup: use more constants in M701
2022-08-19 17:14:54 +02:00
84888507e3
Merge pull request #3557 from wavexx/fix_g28_code_value
...
G28: check for X/Y/Z parameters before calling code_value_long
2022-08-19 17:12:07 +02:00
2a0989c440
Merge pull request #3551 from wavexx/eof_crash_reentry
...
Prevent re-entry in EOF command processing
2022-08-19 17:07:21 +02:00
81ec94db64
Show firmware version on splash screen
2022-08-15 16:18:17 +03:00
06d19b472a
G28: check for X/Y/Z parameters before calling code_value_long
...
Fixes #3555 , thanks to @toombaumarkt
2022-08-07 00:36:54 +02:00
3a1914f2fb
Simplify printingHasFinished
...
Unswitch the call to file.close().
Do not call quickStop(): motion has already completed due to
st_synchronize.
2022-08-06 23:29:34 +02:00
4f22de2333
Do *not* shorten the current command in printer_smodel_check
...
printer_smodel_check was incorrectly substituting the final " with a
null in the command to simplify the model string comparison, but in
doing so was also corrupting the next pop from the cmdqueue.
We can modify the current strchr_pointer as long as we *don't* change
it's length. This can cause an incorrect extra read from the queue,
resulting in the last command to be completely ignored.
2022-08-06 23:15:46 +02:00
68c04ca2f6
Switch a few pointers that don't manipute strings to const
2022-08-06 23:08:03 +02:00
a533ba3574
Reset sdpos_atomic when starting a new SD print
...
Fix an incorrect SD offset on the first G-Code command when the second
SD print is started.
2022-08-06 22:16:50 +02:00
598991dc69
- Fake-gen some folders to organize targets
...
- Support building both en and multilang together
2022-08-06 12:24:30 -04:00
04ea371936
Set source files explicitly for reproducible build
2022-08-06 10:57:03 -04:00
ea920536cb
Add version info to filenames
2022-08-05 21:03:41 -04:00
1e7e9aa391
fix typo
2022-08-05 17:45:48 -04:00
5f12c7f10b
* Synchronize flags with arduino
...
* Use cmake -E cat for merge
* Set AR/ranlib to GCC flavour
2022-08-05 16:54:07 -04:00
7ddeb84486
Merge pull request #8 from 3d-gussner/build-with-cmake
...
Update Windows MAC download urls
2022-08-05 16:47:02 -04:00
9e52798224
Update Windows MAC download urls
...
Add python dependencies for translations
2022-08-05 16:23:35 +02:00
8cbe69e285
Update RepRap documentation
2022-08-02 17:56:53 +02:00
e60bb935e5
Remove test.sh from travis build
2022-08-02 07:38:53 +02:00
9633f34e89
Merge pull request #3544 from 3d-gussner/MK3_Fix_po_for-MK25s
...
Sync PF-build.sh and MK404-build.sh with MK3_3.11.1 branch
2022-07-29 16:13:59 +02:00
c0b5fea525
Prevent re-entry in EOF command processing
...
cmdqueue will run commands when EOF is reached without returning to the
main loop, which is already incorrect.
However, since it needs to ensure the queue is empty, an st_synchronize
call can result in a re-entrant call to get_command, which will
reprocess EOF again. Even if we removed st_synchronize, another command
could be picked by an unsuspecting manage_inactivity() somewhere else.
Short-circuit EOF processing by closing the file early and checking for
the file state early in get_command.
This should fix #3549
2022-07-29 15:55:54 +02:00
ca0d6caddf
Be explicit on languages
2022-07-28 18:16:15 -04:00
25ee23ca76
clean indentation
2022-07-28 08:11:11 -04:00
fa1be17b7c
cmake lang control
2022-07-28 08:07:08 -04:00
f453403ea9
bugfix
2022-07-27 22:25:40 -04:00
8a4b395aec
no-xflash case, add convenience target to build absolutely everything.
2022-07-27 20:24:12 -04:00
5bc936d4f5
Remove helper file, fix lang ordering, check sizes
2022-07-27 19:40:11 -04:00
9001d98061
Get version/dir from bootstrap, add pyelftools
2022-07-27 17:58:58 -04:00
d4a46a09c6
Merge pull request #7 from 3d-gussner/build-with-cmake
...
Update bootstrap
2022-07-27 17:21:36 -04:00
e187538973
Update bootstrap
2022-07-27 15:01:07 +02:00
ca8d47a6da
If lcd_draw_update is set outside lcd_status_screen
...
then render the sceen without delay
This adds only 10 bytes of flash
2022-07-27 11:55:08 +00:00
739ccdf804
remove invalid command
2022-07-27 07:22:42 -04:00
f6fd91a235
Optimise lcd_status_screen
...
Saves 20 bytes of flash
2022-07-27 11:14:18 +00:00
33a0a58810
Optimise manage_inactivity call in loop()
...
Saves 12 bytes of flash
2022-07-27 11:14:17 +00:00
f03e3c40ee
WIP/proof-of-concept
2022-07-26 19:33:09 -04:00
Alex Voinea
DRracer
Yuri D'Elia
VintagePC
3d-gussner
Guðni Már Gilbert