a9d0cc5e56
optimisation: Move divison into constexpr
...
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-08-17 07:52:55 +02:00
6b12be42d9
optimisation: Make BED_X and BED_Y into functions
...
Previously these preprocessor macros were always being inlined.
By making these into a function we can control the inlining
more directly.
The number of points on the mesh is also now constant. This means
'n' can now be float at compile time. This removes one uint8_t to float
conversion.
Change in memory:
Flash: -208 bytes
SRAM: 0 bytes
2023-08-17 07:52:55 +02:00
90c21425c6
Optimize is_bed_z_jitter_data_valid()
2023-08-17 07:52:55 +02:00
6af5f5e2a2
Some code cleanup around homing_feedrate
2023-08-17 07:52:55 +02:00
83879fd10c
Cleanup magnet compensation code
2023-08-17 07:52:55 +02:00
8edfff39e4
MBL code cleanup
2023-08-17 07:51:15 +02:00
7b9f2086f4
MBL print area initial implementation
2023-08-17 07:51:15 +02:00
a2eafc587a
Merge branch 'MK3' into 2477-redux
2023-07-26 12:34:38 -04:00
21faa52aab
Rename axis_steps_per_unit to axis_steps_per_mm
2023-07-25 17:10:44 +02:00
e336e2ad08
Fix merge conflict/resync
2023-05-06 11:22:31 -04:00
9272545deb
Dead code cleanup
2023-04-23 12:25:10 +02:00
13f7ba81ff
Cleanup, share more M914/5/FORCE code
2023-02-25 15:49:15 -05:00
8c79bab503
optimisation: there is only one extruder when planning a line
...
Change in memory:
Flash: -50 bytes
SRAM: -3 bytes
2023-01-06 19:33:32 +01:00
b41ece175b
Handle CALIBRATION_STATUS_LIVE_ADJUST
2022-12-30 14:14:01 +01:00
ef83fefce1
More optimization
2022-11-18 14:50:07 +01:00
455c29e78b
Optimize EEPROM usage/functions
2022-11-18 14:50:07 +01:00
03b8a6e464
Use raise_z in more places
...
Change in memory:
Flash: -474 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
129b646c58
Fix MSG_ c=
...
Add MSG_ to messages.c/h
2022-09-14 11:33:24 +02:00
510f13b24a
Make the diag pins open collector with pullup.
...
Solves random crash detected on startup
2022-09-14 07:39:47 +02:00
37c9dcbe53
Optimise calculations to use hypot() where possible
...
flash: -122
RAM: 0
It is defined: hypot(x,y) = sqrtf(x*x + y*y)
2022-08-26 19:36:28 +03:00
380377db0f
Add static assert
2022-02-10 09:47:37 +01:00
9bf45773f9
Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2
2022-01-30 11:43:16 +00:00
c705d4aa10
Change set_z() parameters to uin8_t
...
Saves 24 bytes of flash
2022-01-30 11:39:28 +00:00
52aa5a5f00
Use inlined function set_destination_to_current() in more places
...
Saves 70 bytes of flash memory
2022-01-30 11:39:23 +00:00
b716c208d7
Various optimisation to change int to uint8_t
...
This commit saves 174 bytes of flash memory
2021-08-03 22:42:01 +00:00
d853c19a21
Use fabs() instead of abs() when using floats
...
This saves 514 bytes of flash memory
2021-07-20 08:16:18 +02:00
686054b95e
Changed `x of 4` and `y of 9` to `x/4` and `y/4`
...
Added `Iteration` translation
2021-04-27 20:22:28 +02:00
b8ae08fd3d
Update `x of 4` and `x of 9` messages so longer text can be used.
2021-04-27 07:18:52 +02:00
99206884b5
Calibration: detect biased PINDA and retry calibration
...
PFW-1223
2021-03-12 05:04:49 +01:00
c241adec5f
Ensure babystep_apply|undo always uses the planner
...
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.
The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
2021-02-25 16:44:16 +01:00
e010ca8ceb
Fix conflicting extern/inline declarations
...
The functions find_bed_induction_sensor_point_* have conflicting
extern and inline declarations.
These are used outside of the compilation unit only, and thus there's no
point in defining them inline.
This causes a compilation failure at O1 and above, which is strangely
avoided at Os.
2021-02-10 14:50:13 +01:00
d7507649d8
Remove degree char
2021-01-12 00:28:46 +01:00
333526f65d
Single skew output
2021-01-11 23:14:12 +01:00
e6e44fe188
Convert to degrees
2021-01-11 23:13:08 +01:00
b8443b00ad
Reverse reverse
2021-01-11 22:18:50 +01:00
09892bec52
Reverse
2021-01-11 18:46:56 +01:00
211e5f5f37
Define DBG output
2021-01-11 17:31:26 +01:00
904a23b69e
Report calibration results
2021-01-11 17:02:41 +01:00
2e40a27460
Alignment, comments
2021-01-11 15:40:12 +01:00
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
eb44ee0f57
Code size optimization: 2KB down ( #2687 )
...
* Combine repeated calls into functions with much less parameters -> 2KB
down.
* Save some bytes by removing unnecessary 1-character strings: "x" -> 'x'
used in SERIAL_xxx printing macros.
This is also saves some CPU cycles
* Fix compilation for MK25S and MK3
* Copy surrounding indentation
* Fix compilation for a rare HW setup
* rename mesh_planXX_buffer_line back to mesh_plan_buffer_line
* Remove active_extruder from remaining plan_buffer_line_destinationXYZE
calls and one more fix of indentation
2020-06-01 17:51:28 +02:00
8c2902a660
Revert "Mesh bed leveling testing"
...
This reverts commit 28e812d91f
2020-01-29 23:07:53 +02:00
28e812d91f
Mesh bed leveling testing
2019-11-13 14:32:33 +02:00
7650e2b60c
Handle disable_heater()
2019-10-06 12:43:03 +03:00
570b5989f4
Disable bed PWM while probing bed.
2019-10-06 10:50:11 +03:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
96a111119b
document
2019-03-28 14:52:50 +01:00
8f69d5a501
document
2019-03-28 14:48:35 +01:00
Guðni Már Gilbert
Alex Voinea
vintagepc
Yuri D'Elia
D.R.racer
3d-gussner
espr14
DRracer
Marek Bel
Ondrej Tuma
PavelSindler