3662f60f8f
if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values;
2018-09-24 18:13:20 +02:00
c38fef281d
Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore.
2018-09-24 17:33:58 +02:00
ca179a2d18
Use cs.filament_size from ConfigurationStore.
2018-09-24 17:29:02 +02:00
e225e9cab0
Use cs.volumetric_enabled from ConfigurationStore.
2018-09-24 17:12:16 +02:00
a201128b20
Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore.
2018-09-24 17:10:25 +02:00
7e593e6922
Use cs.autoretract_enabled from ConfigurationStore.
2018-09-24 17:03:10 +02:00
20ba2b1c79
Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore.
2018-09-24 16:57:48 +02:00
54bcc8aa52
Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore.
2018-09-24 16:54:50 +02:00
f2ae3fb1f7
Use cs.zprobe_zoffset from ConfigurationStore.
2018-09-24 16:47:57 +02:00
959d0069fa
Use cs.add_homing from ConfigurationStore.
2018-09-24 16:42:28 +02:00
ac7c062161
Use cs.max_jerk from ConfigurationStore.
2018-09-24 16:35:33 +02:00
bb66bfe6a7
Use cs.minsegmenttime from ConfigurationStore.
2018-09-24 16:22:50 +02:00
0e7afc67ca
Merge pull request #1175 from PavelSindler/eeprom_version
...
M500 EEPROM version update and M500 EEPROM block size check
2018-09-24 16:19:55 +02:00
10428b30d9
Use cs.mintravelfeedrate from ConfigurationStore.
2018-09-24 16:01:58 +02:00
cd438c5c00
whitespace
2018-09-24 16:01:31 +02:00
740e922b87
EEPROM M500 block size check for reading stored data added
2018-09-24 16:00:23 +02:00
26e2fd1c76
Use cs.minimumfeedrate from ConfigurationStore.
2018-09-24 15:57:24 +02:00
b8fefceb4d
Use cs.retract_acceleration from ConfigurationStore.
2018-09-24 15:53:35 +02:00
7dbe0afdc4
Use cs.acceleration from ConfigurationStore.
2018-09-24 15:47:36 +02:00
cee51cf9c3
Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore.
2018-09-24 15:40:35 +02:00
02becb5e6a
Use cs.max_feedrate_normal from ConfigurationStore.
2018-09-24 15:09:19 +02:00
053b94b711
remove "start" duplicity in setup
2018-09-24 14:57:46 +02:00
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
d611cad087
Temporary hide M500_conf cs to allow automated renaming.
2018-09-24 14:42:01 +02:00
e94dc1341a
Use M500_conf cs in Config_ StoreSettings, RetrieveSettings and ResetDefault.
2018-09-24 14:34:43 +02:00
991db0e71d
Finish default_conf.
2018-09-23 23:36:01 +02:00
d9e2dcc736
Incomplete.
2018-09-23 22:21:28 +02:00
58af1ae4c4
Add configuration store struct.
2018-09-21 20:52:44 +02:00
d8dc2eef7a
if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values; eeprom_version changed back to V2
2018-09-21 15:42:28 +02:00
1c33b673c0
comment update
2018-09-19 18:43:27 +02:00
3d57d504ba
Merge pull request #1174 from mkbel/fix_runout_resume
...
Fix runout resume
2018-09-19 18:29:32 +02:00
2607a0c4ed
Update documentation.
2018-09-19 17:22:06 +02:00
b92b307ee8
Make variables constant.
2018-09-19 17:21:45 +02:00
cce8131070
Add missing s for seconds of print time.
2018-09-19 17:20:41 +02:00
b5bb40474d
Fix print time overflow.
2018-09-19 17:17:32 +02:00
0a5394a20e
defines moved to eeprom.h
2018-09-19 15:10:10 +02:00
752aec37fb
M500 EEPROM version changed; if EEPROM_M500_SIZE is not updated, data are not stored
2018-09-19 14:36:26 +02:00
9868dd766e
Fix print not recovered when filament sensor is disabled during filament change initiated by filament run out.
2018-09-19 14:22:08 +02:00
a5a7b1f1d6
Move functions definitions behind variable definitions. (No change in functionality.)
2018-09-19 14:08:31 +02:00
05d3b7032d
Update documentation.
2018-09-18 17:48:11 +02:00
a7fdfdd258
Put repetitive code into separate function. No change in functionality.
2018-09-18 17:15:13 +02:00
6ee97468ee
Remove lcd_buttons_update() call from all other places than interrupt. There is no known reason, why lcd_buttons_update() should be called from multiple places and multiple contexts. Remove mutex, which is not needed anymore, and wasn't implemented properly anyway (Operation was not atomic.).
2018-09-18 16:05:49 +02:00
f532da4b17
Remove duplicate button debouncing code. Save 254B flash.
2018-09-18 14:39:01 +02:00
90a10a692a
Enable button debouncing also in modal mode (!lcd_update_enabled). In lcd_clicked() consume click event immediately.
2018-09-18 14:38:50 +02:00
ab2d350ed1
Don't enable lcd update in lcd_show_fullscreen_message_and_wait_P(). Don't show menu in wizard when ejecting filament.
2018-09-17 21:23:13 +02:00
a687b8e64a
Don't enable lcd update inside mmu_eject_filament().
2018-09-17 17:12:36 +02:00
f496076508
Remove redundant code. No change in functionality.
2018-09-14 18:33:03 +02:00
635a1b4cd8
Add possibility to to select preheat temperature when unloading filament in first layer calibration wizard.
...
Known limitations:
During filament eject, menu is shown for some moment.
2018-09-14 18:29:14 +02:00
fe30e58fb5
Add possibility to unload filament from wizard before first layer calibration, if it is not PLA.
...
Known limitations:
Preheat temperature other than PLA can not be selected.
During filament eject, menu is shown for some moment.
2018-09-14 16:06:25 +02:00
d14822b22f
Give wizard states human readable names. Use uint8_t as underlying type - saves 20B of FLASH memory.
2018-09-13 16:37:41 +02:00
8235f0f869
Merge branch 'MK3_dev' into add_cancel
2018-09-12 19:38:26 +02:00
7bc46323e2
Update pause print documentation.
2018-09-12 18:35:26 +02:00
de2100ac7b
Merge branch 'MK3' into MK3_dev
2018-09-12 15:22:12 +02:00
0d4f4fe933
Merge pull request #1143 from PavelSindler/lang2
...
lang fix
2018-09-12 09:38:18 +02:00
45066ebddc
lang fix
2018-09-12 09:37:16 +02:00
30d54be9de
Merge pull request #1142 from PavelSindler/lang2
...
changed version
2018-09-12 09:20:32 +02:00
298950e601
changed version
2018-09-12 09:19:23 +02:00
3e84bf6341
Lang update (translation + increased reserved space)
2018-09-12 02:45:13 +02:00
13b67f0e0a
Add Cancel item into PLA filament selection menu initiated by first layer calibration with MMU.
2018-09-11 22:33:13 +02:00
ada7cffd32
Open menu to select filament before first layer calibration if MMU unit is present.
2018-09-11 19:53:29 +02:00
96aada9061
load filament messages, czech language missing translation readded
2018-09-11 18:25:38 +02:00
5649d6c3c0
Precede active filament on status screen with letter F.
2018-09-11 17:27:10 +02:00
98264808dc
Change gcode "T?" question from "Choose extruder:" to "Choose filament" and answers from "Extruder 1" .. "Extruder 5" to "Filament 1" .. "Filament 5".
2018-09-11 17:16:13 +02:00
46df46f482
Add possibility to use other filaments in LCD_COMMAND_V2_CAL.
2018-09-11 17:03:20 +02:00
19a1ccdc76
Rename choose_extruder_menu() to choose_menu_P(), add parameters to make it reusable.
2018-09-11 16:51:00 +02:00
6c6354b2cb
Do not preheat nozzle before loading filament to MMU in first layer calibration wizard.
...
Show insert PLA filament to the first tube of MMU instead of "to the extruder".
First layer calibration wizard with MMU is now functional. But there is no option to unload filament from wizard.
2018-09-11 16:03:46 +02:00
0fcd2cf2a1
Merge branch 'MK3_dev' into fix_mmu_1st_lay_cal
2018-09-11 15:26:35 +02:00
d9a2fe70ec
missing declaration fix
2018-09-11 11:06:37 +02:00
c023fb12d5
add choose filament messages
2018-09-11 09:50:50 +02:00
90e3ae5464
Merge pull request #1127 from XPila/MK3
...
Lang update, french translation
2018-09-11 09:44:02 +02:00
4ca300bc39
Lang update, french translation
...
+resized reserved space
2018-09-11 03:43:05 +02:00
b3bc71b45b
Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev
2018-09-10 23:52:51 +02:00
25a46557d1
merge with upstream
2018-09-10 22:11:32 +02:00
8a9f066c1b
choose_extruder_menu: extruder -> filament
2018-09-10 22:09:37 +02:00
cc08d660f7
Always use filament 1 for first layer calibration when MMU is present.
...
Lift Z when moving from intro line to meander.
For MMU, print longer intro line to allow load to nozzle.
2018-09-10 20:55:50 +02:00
1bb9e9ed92
MMU_DEBUG
2018-09-10 20:39:28 +02:00
6fa798aa83
init
2018-09-10 20:08:13 +02:00
1253fb338a
wizard hotfix
2018-09-10 18:02:54 +02:00
764e5c9769
Merge branch 'MK3' into MK3_dev
2018-09-09 22:52:01 +02:00
5a6ef00cfc
Do not unload filament from nozzle when touching bed in the end of first layer calibration. Unload it after reaching home position.
2018-09-07 10:50:23 +02:00
ebfbf4ac3f
Merge branch 'MK3' into MK3_dev
2018-09-07 09:24:45 +02:00
cbc506c379
Merge pull request #1110 from PavelSindler/lcd_clicked_error_fix
...
lcd_clicked() fix (PFW-534 and PFW-546)
2018-09-07 09:07:03 +02:00
001680bbdc
Merge branch 'MK3' into time_remaining_fix
...
# Conflicts:
# Firmware/Marlin_main.cpp
2018-09-07 08:21:36 +02:00
801f8e93e8
Merge pull request #1112 from PavelSindler/MK25_time_remaining
...
MK25: always show "normal mode" remaining time (PFW-553)
2018-09-07 08:05:16 +02:00
2f02828273
time remaining fix
2018-09-07 02:02:35 +02:00
66305b3e04
MK25: always show "normal mode" remaining time
2018-09-06 23:05:36 +02:00
48bf5d3a75
Merge pull request #1104 from mkbel/MK3_dev
...
Merge MK3 into Mk3_dev
2018-09-06 21:01:29 +02:00
dbc0654b1c
Merge pull request #1108 from mkbel/pause_print
...
Pause print
2018-09-06 21:01:16 +02:00
48f5da9cb8
lcd_clicked fix
2018-09-06 20:54:51 +02:00
0e50c388af
Save 1K flash memory.
2018-09-06 15:06:46 +02:00
0d99dc0a3f
PFW-543 Add filament ramming when unloading filament with MMU.
2018-09-06 15:06:33 +02:00
5d1e59cec3
Fix problem that nozzle temperature stays 0 if resume print is invoked from menu earlier than pause movements are finished.
2018-09-06 13:20:24 +02:00
0fe48de4af
Remove feedmultiplyBckp global variable. Remove redundant isPrintPaused = true assignment, as it is already done in lcd_pause_print(). Remove unused saved_feedmultiply and fanSpeedBckp prototypes. Move isPrintPaused = true assignment to safer location, as LCD_COMMAND_LONG_PAUSE is not reached if lcd_commands_type is not LCD_COMMAND_IDLE.
2018-09-06 12:23:21 +02:00
05a0b9c939
Remove fanSpeedBckp global variable.
2018-09-06 11:41:44 +02:00
40990c4deb
Remove saved_feedmultiply global variable.
2018-09-06 11:30:06 +02:00
b43c8dad74
Remove HotendTempBckp global variable.
2018-09-06 10:05:59 +02:00
d71311f13f
Remove redundant HotendTempBckp from crash detection recover.
2018-09-06 09:41:37 +02:00
920d828833
Rename lcd_sdcard_pause() to lcd_pause_print() to reflect, that also USB printing could be possible to pause. Unite it with pause_print() and use new (immediate) pause mechanism in all places where old mechanism was used. Rename resume_print() to lcd_resume_print() and make it global, unite it with lcd_sdcard_resume() and use it also in place, where lcd_commands_type = LCD_COMMAND_LONG_PAUSE_RESUME was used. Remove LCD_COMMAND_LONG_PAUSE_RESUME lcd_command_type. Remove unused pause_lastpos[].
2018-09-06 08:43:54 +02:00
67b2456ad9
Merge branch 'MK3' into MK3_dev
2018-09-05 21:48:29 +02:00
74be7677cf
Fix problem, that current_position is rewritten after long_pause() call.
2018-09-05 21:10:05 +02:00
Marek Bel
mkbel
PavelSindler
PavelSindler
Robert Pelnar