af5cfe76b5
Merge pull request #495 from XPila/MK3-accurate_homming
...
Accurate homing, fix - enabled after selftest.
2018-02-22 20:54:08 +01:00
06da2bb915
Accurate homing, fix - enabled after selftest.
...
Experimantal menu - conditional translation.
2018-02-22 20:50:34 +01:00
ae50a1a768
checking fan speed synchronized with block currently processed
2018-02-22 17:12:24 +01:00
d020f48791
Merge pull request #485 from bubnikv/M221_fix
...
Unified the volumetric_multiplier with extrusion_multiply to improve
2018-02-22 14:17:09 +01:00
ba49c21f17
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-21 11:25:21 +01:00
74e6ff67d3
Merge pull request #482 from bubnikv/M221_fix
...
M221 fix
2018-02-20 19:10:07 +01:00
66161062cf
Homing accuracy calibration in selftest.
2018-02-20 19:02:55 +01:00
e2e48bfd71
SD speed test (DEBUG)
...
homeaxis - fix set_destination_to_current
2018-02-20 18:50:20 +01:00
d91dbc73c9
tmc2130 - optimalization, removed unused code
2018-02-20 17:06:37 +01:00
ee5949c56e
Fix of a loss in precission when the extruder multiplier is set
...
with M221. For 50um layers, the precision loss leads to holes
in the print.
2018-02-20 15:30:18 +01:00
403ed26d47
Merge remote-tracking branch 'remotes/upstream/MK3' into MK3
2018-02-20 15:21:44 +01:00
dff8c29362
Microstep linearity correction, optimized wave compression.
...
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
2018-02-17 19:58:40 +01:00
57499dc6a0
M350 for E axis (8, 16, 32, 64, 128 microsteps)
2018-02-15 15:40:49 +01:00
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
33aa3d5e7d
commint nr
2018-02-05 16:56:31 +01:00
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
2018-02-05 16:49:06 +01:00
485355274e
Optimized the MarlinSerial class by declaring all methods static.
...
The MarlinSerial defines no member variable, though the AVR GCC
stored a "this" pointer onto stack when calling the non-static
methods anyway.
2018-02-02 20:25:19 +01:00
36536044f4
version changed
2018-02-02 17:48:02 +01:00
4d8807e924
bugfix - failstats (total counters) reset to zero for empty eeprom (0xff)
2018-02-02 15:59:37 +01:00
2dd2c971e2
whitespace
2018-02-01 20:25:19 +01:00
84f7d057f3
fw version check: FW_VERSION string is case insensitive (parsing RC works)
2018-02-01 20:23:45 +01:00
d92f6292aa
unload with lowered current
2018-02-01 17:43:03 +01:00
a256a8ff19
Merge pull request #450 from XPila/3.1.1-RC6
...
filament sensor additional check after runout (3mm back, 3mm forward …
2018-02-01 12:20:59 +01:00
e20ee149b0
filament sensor additional check after runout (3mm back, 3mm forward @200mm/min)
2018-01-31 21:10:41 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
822dd8ff9c
Merge pull request #448 from PavelSindler/eeprom_versions
...
EEPROM version change: inform user on LCD that default settings were loaded
2018-01-31 20:06:19 +01:00
beb3a507d3
Merge pull request #441 from PavelSindler/send_OK
...
PID cal. is not sending OK periodically, print fan error pauses print…
2018-01-31 20:03:08 +01:00
adc69eda18
PINDA temp. calibration warning messages.
2018-01-31 17:03:33 +01:00
1a01282e33
cardreader - new member "paused"
...
tmc2130 - decreased crash sensitivity for Y
2018-01-31 15:20:27 +01:00
4c5618c371
failstats - reset "last print" counters
...
card - new member variable "paused" (bool)
2018-01-31 15:09:36 +01:00
daaac2fb88
fail stats
2018-01-30 19:49:40 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
88f248cb77
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
39bd5c3a1d
Extruder stealthChop and constant-off-time mode.
...
Extruder different chopper frequency in spreadcycle.
Dcodes (fix)
2018-01-25 05:13:21 +01:00
f4073120ef
-m Added Encoder Fix changes
2018-01-25 06:49:28 +10:00
cae68d9f6d
Extruder resolution changed to 32usteps
...
build 151
2018-01-24 01:41:42 +01:00
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes
...
invalid / unknown gcodes reported on serial
2018-01-24 00:12:47 +01:00
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update
...
Preheat temperatures update
2018-01-24 00:11:59 +01:00
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed
...
typo fixed
2018-01-24 00:10:28 +01:00
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate
...
Optimization of the filament sensor.
2018-01-24 00:10:00 +01:00
70ff22571f
minor change
2018-01-23 20:04:18 +01:00
3adedb558b
invalid / unknown codes reported on serial
2018-01-23 20:01:02 +01:00
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
44dc12005f
Optimization of the filament sensor.
2018-01-23 16:47:42 +01:00
c38458eb67
init
2018-01-23 16:21:43 +01:00
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
XPila
PavelSindler
PavelSindler
bubnikv
TheZeroBeast