b2255c8be9
Preheat nozzle before loading filament in M600 (change filament) gcode.
...
This fixes problem of not heating the nozzle when retrying load after MMU load failed.
2019-03-04 22:00:24 +01:00
27f69bb761
Merge pull request #1570 from PavelSindler/mmu_stealth_mode
...
mmu stealth mode
2019-03-04 17:09:11 +01:00
7f92d73a40
MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update
2019-03-04 17:04:22 +01:00
22500970ba
Remove commented out code, fix formatting.
2019-03-01 16:18:16 +01:00
85c208f9f4
Merge branch 'MK3' into bad_load_cut
2019-03-01 14:55:55 +01:00
22c0d6e230
Merge pull request #1577 from mkbel/add_cut
...
Add MMU cut filament
2019-03-01 14:53:12 +01:00
e14e4be94e
Merge pull request #1575 from mkbel/add_ramming_eject
...
Add filament ramming to eject filament.
2019-03-01 14:21:23 +01:00
0db721b244
Merge pull request #1559 from mkbel/detect_bad_load
...
Move extruder forth and back after filament detected by sensor to det…
2019-03-01 14:21:04 +01:00
02a692c5d9
Store cutter enable state in EEPROM.
2019-02-27 17:34:03 +01:00
4a4eb9962c
Cut filament when cutter is enabled and MMU load fails.
2019-02-27 10:42:26 +01:00
2f1e968563
"lcd_update_enable()" replacement
2019-02-26 23:17:52 +01:00
a67645fda6
Merge branch 'add_cut' into bad_load_cut
2019-02-26 18:35:55 +01:00
815231bc26
Add MMU cut filament menu.
2019-02-26 17:58:00 +01:00
6c9dd4f272
Add filament ramming to eject filament.
2019-02-26 13:41:28 +01:00
7a1b47c340
Convert functions mmu_eject_fil_0 to mmu_eject_fil_4 to template function.
2019-02-26 11:11:05 +01:00
34e2495487
Convert mmu_load_to_nozzle_0 to mmu_load_to_nozzle_4 to template.
2019-02-26 10:32:10 +01:00
8f5fbe569c
Merge branch 'MK3' into detect_bad_load
2019-02-25 10:41:26 +01:00
8e3d52ee6d
fix compilation error for MK2.5, make code more readable
2019-02-22 17:15:40 +01:00
26cab2911f
mmu stealth mode
2019-02-22 16:30:54 +01:00
ed93f1b7f0
preHeat @ filament management
...
another funcionality IIb
2019-02-21 15:27:22 +01:00
a54c68b874
preHeat @ filament management
...
another funcionality II
2019-02-21 04:45:44 +01:00
8b858286ac
Document.
2019-02-21 02:30:01 +01:00
326c8492b5
Move extruder forth and back after filament detected by sensor to detect bad load.
2019-02-21 01:19:26 +01:00
da0867cfc5
preHeat @ filament management
...
another funcionality
2019-02-20 03:01:33 +01:00
11d19879fc
Merge pull request #1533 from MRprusa3d/PFW-210
...
preHeat @ filament load / unload / autoLoad / MMU
2019-02-15 17:45:38 +01:00
9d76b6912c
merge new changes from upstream
2019-02-15 17:05:39 +01:00
69ff37729e
whitespace
2019-02-15 14:19:30 +01:00
0f791ce47f
mmu needs attention: idler error fix
2019-02-15 14:17:47 +01:00
80c3420a12
Merge branch 'MK3' into PFW-210
2019-02-14 00:05:50 +01:00
ef1f82627e
preHeat @ filament load / unload / autoLoad / MMU
...
MMU options added
2019-02-13 23:53:00 +01:00
a5437cb15b
Resend MMU T commands only.
...
This solves problem with unload repeated if unload takes too long, second ok reply then triggers Wait end and resumes print.
2019-02-13 22:29:29 +01:00
a4032e437e
Add MMU wait command after MMU load failed. Resume print when MMU wait command returns OK.
2019-02-13 21:28:21 +01:00
daaec0ef04
Convert MmuCmd to enum class.
2019-02-13 17:12:35 +01:00
8e23e7f322
Save some flash by using smaller type for filament.
2019-02-13 16:37:54 +01:00
9e873ac0f7
Use enum for mmu_cmd instead of plain integer type.
2019-02-13 01:51:39 +01:00
bb7eeef1f4
Define debug printf and puts functions to make code more readable.
2019-02-12 23:24:23 +01:00
e1216934ef
Save flash by defining underlying type and omitting number value.
2019-02-12 21:53:11 +01:00
3379fb4866
Convert mmu_state to enum.
2019-02-12 21:43:26 +01:00
6c8d9c6fb4
Retry filament load on MMU load failure once.
2019-02-11 23:43:42 +01:00
d33b24c281
Unload filament after MMU load failed so MMU unit can be controlled by its buttons.
2019-02-11 23:24:55 +01:00
9926468c91
Merge remote-tracking branch 'upstream/MK3' into variants
2019-01-30 17:26:45 +01:00
83510ed489
check_for_ir_sensor
2019-01-28 17:27:16 +01:00
eea755496b
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
...
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h.
This commit enables original implementation (SYSTEM_TIMER_2 undefined)
Verified with passed complete wizard process.
2019-01-27 22:48:51 +01:00
434a723151
Timing functions 'micros' and 'delay' replaced in whole source with 'micros2' and 'delay2'
2019-01-27 17:37:27 +01:00
fc1491670f
mmu_idler_sensor_detected -> ir_sensor_detected
2019-01-25 18:03:05 +01:00
6b6a3d7d5f
MMU_IR_SENSOR_PIN -> IR_SENSOR_PIN
2019-01-25 18:01:17 +01:00
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
661c40ef75
Merge pull request #1472 from mkbel/IR_fsens_selftest
...
Ir fsens selftest
2019-01-25 13:14:18 +01:00
f4e5c729ac
Merge pull request #1451 from mkbel/Tx_fix
...
Tx fix
2019-01-24 13:41:43 +01:00
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
Marek Bel
mkbel
PavelSindler
PavelSindler
MRprusa3d
MRprusa3d
Robert Pelnar