c2f098e263
Merge pull request #1015 from mkbel/fix_compiler_warnings
...
Fix compiler warnings
2018-08-08 18:37:57 +02:00
cda93906bc
Merge pull request #1018 from prusa3d/MK3
...
Merge MK3 into MK3_dev
2018-08-07 20:09:09 +02:00
4cc127feac
Merge pull request #817 from 3d-gussner/MK3_fix6
...
Fix MK3 compilation issue with Arduino 1.8.x
2018-08-07 20:02:52 +02:00
7e19b4adc1
Supress compiler warning sketch/Marlin_main.cpp:3079:6: warning: unused parameter 'e_shift_late' [-Wunused-parameter]. Make function static. Fix indentation.
2018-08-07 19:17:29 +02:00
814d31d70d
Remove factory_reset() unused quiet parameter and make it static. It was tested, that both calls of factory reset (from menu and via PRUSA FR command) works somehow. Fix compiler warning: sketch/Marlin_main.cpp:808:6: warning: unused parameter 'quiet' [-Wunused-parameter]
2018-08-07 18:50:11 +02:00
791b568339
Fix compiler warnings: sketch/uart2.c:19:33: warning: unused parameter 'stream' [-Wunused-parameter]
...
sketch/uart2.c:28:25: warning: unused parameter 'stream' [-Wunused-parameter]
sketch/Marlin_main.cpp:925:5: warning: unused parameter 'stream' [-Wunused-parameter]
sketch/lcd.cpp:224:5: warning: unused parameter 'stream' [-Wunused-parameter]
2018-08-07 17:51:30 +02:00
4395ec207e
Fix compiler warnings: sketch/xyzcal.cpp:111:10: warning: unused parameter 'nd' [-Wunused-parameter]
...
sketch/xyzcal.cpp:111:10: warning: unused parameter 'dd' [-Wunused-parameter]
2018-08-07 17:32:27 +02:00
78f1a7914f
Fix compiler warning: sketch/xyzcal.cpp:90:6: warning: unused parameter 'de' [-Wunused-parameter].
2018-08-07 16:45:19 +02:00
9271d12bf7
Save 32B of FLASH, fix compiler warning: sketch/tmc2130.cpp:238:6: warning: unused parameter 'last_step_mask' [-Wunused-parameter].
2018-08-07 16:32:32 +02:00
5af4897360
Fix compiler warning sketch/stepper.cpp:1553:6: warning: unused parameter 'driver' [-Wunused-parameter]
2018-08-07 16:05:06 +02:00
880ed67785
Fix compiler warning: sketch/stepper.cpp:1499:6: warning: unused parameter 'address' [-Wunused-parameter].
2018-08-07 16:00:35 +02:00
e06e19edf5
Fix showing calibration results.
...
Messages:
_i("XYZ calibration failed. Bed calibration point was not found.")
_T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
_i("XYZ calibration failed. Front calibration points not reachable.")
_i("XYZ calibration failed. Right front calibration point not reachable.")
_i("XYZ calibration failed. Left front calibration point not reachable.");
were never shown.
Fix compiler warnings:
sketch/ultralcd.cpp:3476:19: warning: comparison is always false due to limited range of data type [-Wtype-limits]
sketch/ultralcd.cpp:3478:26: warning: comparison is always false due to limited range of data type [-Wtype-limits]
2018-08-07 15:46:23 +02:00
c0f37efbad
Save 278B of flash. Remove unused function parameters. Make functions static. Fix compiler warnings:
...
sketch/ultralcd.cpp:292:6: warning: unused parameter 'pstr' [-Wunused-parameter]
sketch/ultralcd.cpp:292:6: warning: unused parameter 'filename' [-Wunused-parameter]
sketch/ultralcd.cpp:344:6: warning: unused parameter 'pstr' [-Wunused-parameter]
sketch/ultralcd.cpp:364:6: warning: unused parameter 'pstr' [-Wunused-parameter]
sketch/ultralcd.cpp:385:6: warning: unused parameter 'pstr' [-Wunused-parameter]
sketch/ultralcd.cpp:6920:6: warning: unused parameter 'longFilename' [-Wunused-parameter]
sketch/ultralcd.cpp:6965:6: warning: unused parameter 'longFilename' [-Wunused-parameter]
2018-08-07 15:29:58 +02:00
cf069f3fc2
Fix compiler warning sketch/ultralcd.cpp:53:31: warning: missing initializer for member 'MenuData::BabyStep::babystepMem' [-Wmissing-field-initializers]
2018-08-07 15:07:51 +02:00
453b199057
Save 8B flash, fix compiler warning sketch/sound.cpp:62:6: warning: unused parameter 'eSoundClass' [-Wunused-parameter]
2018-08-07 15:05:18 +02:00
548f4cb1fa
Fix compiler warning sketch/mmu.cpp:32:6: warning: unused parameter 'extr' [-Wunused-parameter]
2018-08-07 15:01:49 +02:00
4c146a5b2c
Fix compiler warning: sketch/mesh_bed_leveling.cpp:24:6: warning: unused parameter 'use_default' [-Wunused-parameter].
2018-08-07 14:44:53 +02:00
aa0f1fd80b
Fix compiler warnings sketch/mesh_bed_calibration.cpp:150:21: warning: unused parameter 'npts' [-Wunused-parameter]
...
sketch/mesh_bed_calibration.cpp:172:21: warning: unused parameter 'npts' [-Wunused-parameter]
2018-08-07 14:20:51 +02:00
e9d8ed8599
Fix compiler warning: sketch/mesh_bed_calibration.cpp:1057:13: warning: unused parameter 'verbosity_level' [-Wunused-parameter]
2018-08-07 13:58:06 +02:00
0d35451544
Fix compiler warning: sketch/mesh_bed_calibration.cpp:966:13: warning: unused parameter 'verbosity_level' [-Wunused-parameter]
2018-08-07 13:00:22 +02:00
523c9cd737
Fix compiler warning: sketch/mesh_bed_calibration.cpp:205:34: warning: unused parameter 'verbosity_level' [-Wunused-parameter]
2018-08-07 12:58:15 +02:00
95d13cbb59
Fix compiler warning: sketch/mesh_bed_calibration.cpp:135:20: warning: unused parameter 'i' [-Wunused-parameter]
2018-08-07 12:52:51 +02:00
7364b6cf80
Do not compare signed value with unsigned, add parentheses.
2018-08-07 12:52:51 +02:00
2e719c7885
Fix stack corruption for folder name longer than 12 characters. Save 260B of flash memory. Move duplicate code to separate method. Fix compiler warnings: sketch/cardreader.cpp:448:25: warning: ordered comparison of pointer with integer zero [-Wextra]
...
sketch/cardreader.cpp:453:22: warning: ordered comparison of pointer with integer zero [-Wextra]
2018-08-07 12:52:51 +02:00
7a6cbf75b9
Fix compiler warnings: sketch/cardreader.cpp: In member function 'void CardReader::openFile(const char*, bool, bool)':
...
sketch/cardreader.cpp:350:25: warning: ordered comparison of pointer with integer zero [-Wextra]
sketch/cardreader.cpp:355:22: warning: ordered comparison of pointer with integer zero [-Wextra]
2018-08-07 12:52:51 +02:00
5f4380cafb
Remove unused function, fix compiler warning: sketch/Marlin_main.cpp:8994:6: warning: unused parameter 'extruder' [-Wunused-parameter]
2018-08-07 12:52:51 +02:00
30438833c6
Fix compiler warning sketch/Marlin_main.cpp:6584:19: warning: comparison is always true due to limited range of data type [-Wtype-limits]
2018-08-07 12:52:51 +02:00
72cfa1b124
Fix 4 compiler warnings of type: sketch/planner.cpp:872:59: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
2018-08-07 12:52:51 +02:00
55a47d57da
Fix compiler warning: sketch/Marlin.h:151:25: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
2018-08-07 12:52:51 +02:00
f873ae9486
Merge pull request #1014 from mkbel/MK3_dev
...
Mk3 dev
2018-08-06 17:09:06 +02:00
ceac1e07bd
Merge branch 'MK3' into MK3_dev
2018-08-06 16:26:38 +02:00
cc37ef4390
Merge pull request #1010 from PavelSindler/snmm_v2
...
PRUSA Fir reports also buildnumber
2018-08-06 15:18:20 +02:00
702a2e1883
Merge pull request #1004 from mkbel/fix_XYhoming_direction
...
Obey defined X and Y homing direction.
2018-08-05 20:18:30 +02:00
bb64dc5a58
Merge pull request #1001 from mkbel/fix_compiler_warnings
...
Fix compiler warnings
2018-08-05 20:18:17 +02:00
d21e527c73
PRUSA Fir reports also buildnumber
2018-08-05 20:17:04 +02:00
2097ef8485
Merge pull request #1006 from PavelSindler/snmm_v2
...
merge with upstream fix
2018-08-03 19:15:00 +02:00
0c2d0bebce
merge with upstream fix
2018-08-03 19:14:17 +02:00
8de1bd6a6c
Merge pull request #1005 from PavelSindler/snmm_v2
...
M600 fix; manage_response fix
2018-08-03 18:57:51 +02:00
cf06c5171c
merge with upstream
2018-08-03 18:43:09 +02:00
a1f69e0924
manage response update
2018-08-03 18:37:52 +02:00
5846707c5a
Remove local variable verbosity_level, which was masking function parameter of the same name. Remove duplicate code to derive verbosity level.
...
Problem manifested itself as compiler warning: sketch/Marlin_main.cpp:2881:6: warning: unused parameter 'verbosity_level' [-Wunused-parameter]
bool gcode_M45(bool onlyZ, int8_t verbosity_level)
2018-08-03 15:49:20 +02:00
5824da8310
add more extrusion to M600 load filament
2018-08-03 15:42:06 +02:00
f6094a58f7
Fix compiler warning sketch/lcd.cpp:160:6: warning: unused parameter 'cols' [-Wunused-parameter].
2018-08-03 15:37:40 +02:00
dd4c4b39b4
Added support for the upstream Marlin interpretation of the M204 code:
...
M204 S.. T..:
T is interpreted the old way (as acceleration when retracting)
only if an S code is found at the same line.
This allows PrusaResearch to interpret the legacy G-codes generated
by our older Slic3r with older Slic3r profiles.
M204 P.. R.. T..:
T is ignored, P is interpreted as acceleration when extruding,
R is interpreted as acceleration when retracting.
This will be the format the Slic3r 1.41.0 will produce from
the Machine Limits page.
In the future both MK3 firmware and Slic3r will likely be extended
to support the separate travel acceleration.
This change will help us to solve the following Slic3r issue:
https://github.com/prusa3d/Slic3r/issues/1089
2018-08-03 15:33:41 +02:00
a85d5948c3
Make function static, save 38B flash.
2018-08-03 15:32:28 +02:00
ae7561bb27
M600 fix: set hotend temperature to correct value, manage_response function fix: now works in case that user presses button on mmu unit before he is asked to do it, compiler warnings (uninitialized variables) fixed
2018-08-03 15:26:39 +02:00
373b4a1ea9
Fix compiler warnings sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::unget' [-Wmissing-field-initializers]
...
FILE _lcdout = {0};
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::flags' [-Wmissing-field-initializers]
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::size' [-Wmissing-field-initializers]
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::len' [-Wmissing-field-initializers]
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::put' [-Wmissing-field-initializers]
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::get' [-Wmissing-field-initializers]
sketch/lcd.cpp:59:18: warning: missing initializer for member '__file::udata' [-Wmissing-field-initializers]
2018-08-03 15:25:52 +02:00
0638e490c1
Fix compiler warnings: sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::unget' [-Wmissing-field-initializers]
...
FILE _uartout = {0};
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::flags' [-Wmissing-field-initializers]
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::size' [-Wmissing-field-initializers]
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::len' [-Wmissing-field-initializers]
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::put' [-Wmissing-field-initializers]
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::get' [-Wmissing-field-initializers]
sketch/Marlin_main.cpp:923:19: warning: missing initializer for member '__file::udata' [-Wmissing-field-initializers]
2018-08-03 15:23:24 +02:00
0632f3b6d8
Fix compiler warnings: sketch/ConfigurationStore.cpp:17:13: warning: unused parameter 'name' [-Wunused-parameter]
...
static void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size, char* name)
sketch/ConfigurationStore.cpp:45:13: warning: unused parameter 'name' [-Wunused-parameter]
static void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size, char* name)
2018-08-03 14:50:51 +02:00
f7f4ba2512
Make functions static, save 270B of flash.
2018-08-03 14:44:56 +02:00
XPila
mkbel
Marek Bel
PavelSindler
PavelSindler
bubnikv