c7e4c9ce99
Allow backwards compatibility with legacy MMU g-codes
...
This piece just changes the default extra load length on the MK3 side.
The same needs to be done on the MMU side but:
- the MMU exposes its register for this (so we can change the extra load distance by writing into the register via G-code)
- the printer shall probably set this value on its own after line up of MMU communication
2022-10-11 15:51:01 +02:00
013ce588a5
Support reading/polling multiple registers
...
In Idle and Command mode it is now possible to specify a list of registers which shall be periodically read from the MMU.
To keep the code and RAM size down registers are intentionally separated into 8bit and 16bit sets.
Adding a register into the set is just a matter of parametrization, there is no need to change the state machines anymore.
2022-10-11 15:51:01 +02:00
ebb79351a7
Add preliminary support for MMU_SELFTEST_FAILED error messages
2022-10-11 15:51:01 +02:00
d5ca47d1a6
Merge pull request #3646 from gudnimg/fix-mmu-buttons-v2
...
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-11 13:42:39 +02:00
8882d8f2c8
Only move XY when position is known
...
I had a crash when producing an error screen and printer was unhomed.
Extruder was located at the far right side, and immediately crashed when attempting to park.
2022-10-11 07:16:52 +02:00
9f3361577e
Merge pull request #3643 from gudnimg/PFW-1358
...
PFW-1358 More button utilizes text and an empty character on the right
2022-10-10 18:02:22 +00:00
98cfc37017
Merge pull request #3674 from gudnimg/mmu-first-lay-cal-purge-line
...
MMU: Sync first layer purge line with PrusaSlicer generated output
2022-10-10 17:59:18 +00:00
213f0e8c71
PFW-1358 Update second_col description
...
Value is no longer hardcoded
2022-10-10 17:48:56 +00:00
07da5b2768
Merge pull request #3680 from wavexx/cmake_repro_build
...
cmake: Improved reproducibility rules
2022-10-10 19:36:09 +02:00
4f9022cea1
Merge pull request #3654 from leptun/fix_miniRambo_SD_init
...
Enable MISO pullup during SD CMD0
2022-10-10 15:09:09 +02:00
8a00179528
cmake: Improved reproducibility rules
...
Rewrite cmake rules for reproducibility and move them inside a separate
module.
The new rules are cleaner and can operate on multi-directory projects
transparently.
2022-10-10 14:19:03 +02:00
eb43d712df
Enable MISO pullup during SD CMD0
...
Fix typo
2022-10-10 09:43:50 +02:00
ccf0c0a09f
Merge pull request #3675 from gudnimg/pad-mmu-status-messages
...
Fix issue where MMU status messages are not padded
2022-10-09 10:49:55 +00:00
1c6345a85b
Fix issue where MMU status messages were not padded
...
Also combined common cases to reduce code size
2022-10-09 10:37:33 +00:00
76dc51d2f0
Sync first layer purge line with PrusaSlicer generated output
...
If you generate a multicolor gcode file with PrusaSlicer, the purge
line gcode will look like this.
This reduces clicking sounds from the extruder, filament extrusion is reduced by 6mm.
2022-10-09 10:03:54 +00:00
047a8d7593
Merge pull request #3671 from gudnimg/cmake-ninja-setting
...
Specify CMake generator in vscode settings
2022-10-08 11:12:55 +00:00
d483531606
PFW-1358 update c values
2022-10-08 09:40:43 +00:00
00ccdcd467
PFW-1358 change MSG_BTN_MORE from I1 to N1
2022-10-08 09:25:06 +00:00
ee6c1e77ca
PFW-1358 Remove MSG_BTN_MORE from po files
2022-10-08 09:24:21 +00:00
fb2f54f7b8
Specify CMake generator in vscode settings
2022-10-08 09:17:53 +00:00
d6e0f47739
PFW-1403 Rename ReportErrorSource to ErrorSource for shorter code
2022-10-08 08:51:32 +00:00
33690b927a
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-08 08:51:32 +00:00
8f0de44d84
PFW-1358 Move 'More' button to the corner of the screen
...
Make 'More' button position consistent with 3-button screen.
2022-10-08 08:50:40 +00:00
7264391c5f
PFW-1358 Fix and optimise button choice positions
2022-10-08 08:50:40 +00:00
9046fb3d44
PFW-1358 Adjust positions of button choices
2022-10-08 08:50:39 +00:00
06427087c0
PFW-1358 Change "More" button to single character
2022-10-08 08:50:39 +00:00
d96392d875
Merge pull request #3431 from TojikCZ/MK3_eeprom_doc
...
Fill the doc for the EEPROM value at 0x0DA1 - active_sheet
2022-10-07 12:17:37 +02:00
233174cf86
Fill the doc for the EEPROM value at 0x0DA1 - active_sheet
2022-10-07 11:59:57 +02:00
64f01d603d
Merge pull request #3663 from 3d-gussner/MK3_PADDED_SIZE
...
Add padded size for individual languages
2022-10-07 08:31:22 +02:00
2067cddc46
Merge pull request #3631 from 3d-gussner/MK3_fix_eeprom_documentation_part1
...
MK3 fix eeprom doxygen documentation
2022-10-06 15:29:15 +02:00
629fc9d0f1
Merge pull request #3638 from wavexx/tm_cal_click
...
TM: Consume LCD click after calibration
2022-10-06 14:29:40 +02:00
bab83704a1
Fix Typo 0X0 to 0x0
2022-10-06 13:23:16 +02:00
0a7a6faa25
Merge pull request #3632 from Hauzman/MK3
...
Update MMU RO Language
2022-10-06 11:52:32 +02:00
9aaa7ca4bc
Merge pull request #3626 from ingbrzy/MK3
...
Update Firmware_sk.po
2022-10-06 10:55:31 +02:00
dd389d018b
Add padded size for individual languages
2022-10-06 10:49:36 +02:00
27261f2f93
Merge pull request #3661 from wavexx/cmake_testing3
...
CI: Update travis to build/test with cmake
2022-10-06 09:39:39 +02:00
cf576e98bf
cleanup: Remove obsolete test.sh
...
Replaced by cmake tests
2022-10-05 23:31:07 +02:00
82ded37916
CI: Switch to a minimal image
2022-10-05 22:57:08 +02:00
b9247df206
CI: Update travis to build/test with cmake
...
Include the new cmake-based build in travis.
Split the build into 3 stages: cmake, legacy and tests.
cmake: new cmake-based build (*all* variants, including english only)
legacy: old build.sh based build (using arduino-builder)
tests: cmake tests (not terribly useful at the moment)
2022-10-05 21:42:43 +02:00
effd5aa5f9
Merge pull request #3660 from gudnimg/cmake-build-type
...
Set CMake build type to Release when using kit
2022-10-05 18:08:06 +00:00
d73f1fa28d
Set CMake build type to Release when using kit
2022-10-05 18:00:01 +00:00
bfaed2768c
Merge pull request #3652 from wavexx/cmake_build_v2
...
cmake build improvements v2
2022-10-05 14:20:28 +02:00
896008cee4
cmake: Remove unneeded additional include path
2022-10-05 11:10:05 +02:00
d867da201f
cmake: Define FW_VARIANT instead of copying Configuration_prusa
2022-10-05 01:26:30 +02:00
1d3ee1caba
build: Add Configuration_var.h as a configuration wrapper
...
Instead of including Configuration_prusa.h directly, include
Configuration_var which then includes the proper variant file though a
preprocessor macro.
This allows to keep the existing build system intact, but also redefine
at compile time the final header without having to make copies on the
file system.
2022-10-05 01:26:26 +02:00
5237365ff7
cmake: Fix existing comment
2022-10-04 22:55:33 +02:00
007d90bc75
cmake: Normalize incoming dependency paths
2022-10-04 12:38:40 +02:00
2ae376d633
build: Size optimization
...
Explicitly force-noinline xyzcal_scan_pixels_32x32_Zhop to match the
previous LTO build behavior.
2022-10-04 12:13:09 +02:00
19477690c9
Merge pull request #3650 from 3d-gussner/MK3_Arduino_Boards_106
...
Update PF-build.sh to use Arduino_boards 1.6.0 which is same as devel…
2022-10-04 08:08:03 +02:00
c479e002d4
cmake: Hard-link final hex files to reduce space overhead
...
cmake 3.19 introduced support for hardlinks, so use them instead of
making a copy.
2022-10-04 01:13:14 +02:00
D.R.racer
3d-gussner
Guðni Már Gilbert
Yuri D'Elia
Alex Voinea
Yuri D'Elia
Tomáš Jozífek