559e1bb21a
Remove unused MMU configs
...
- MMU_IDLER_SENSOR_ATTEMPTS_NR
- MMU_REQUIRED_FW_BUILDNR
These are no longer used
2023-04-16 13:13:16 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
dea7f2b26c
Resolve PR review
...
Initialise EEPROM_CHECK_MODE always
But if farm mode is detected, update the Check mode to Strict
Initialise EEPROM_NOZZLE_DIAMETER on farm mode.
When opening the menus this value is set automatically to
_Diameter_400 anyway so this should be fine.
No change in memory on Multilang build
2023-04-15 13:45:10 +00:00
9f66eceb29
optimisation: belt test new values
...
use lcd_print instead of lcd_printf_P
to print the number only
Tested on MK3S+
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
87e40f1cee
optimisation: lcd_putc_at in belt test
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
b67c359129
Move fan_state to fancheck.cpp and make it static
...
No change in memory
2023-04-15 13:45:10 +00:00
ebdcfbec50
cleanup: tmc2130: make variables static where applicable
...
No change in memory
2023-04-15 13:45:10 +00:00
7c23d8b00c
cleanup: make cancel_heatup static in Marlin_main
2023-04-15 13:45:10 +00:00
d148c08991
Remove dead code from get_coordinates()
2023-04-15 13:45:10 +00:00
c7de1b1416
optimize get_coordinates() axis mask
2023-04-15 13:45:10 +00:00
ea7b395852
Remove useless parantheses
...
Found these a few months ago when I was trying some other optimization. Don't want to make a PR just for this, so I'll just slide it here in this existing PR.
2023-04-15 13:45:09 +00:00
d175dba669
optimisation: use expired_cont is specific places
...
!variable.running() || variable.expired()
is equal to
variable.expired_cont()
The latter required less flash memory
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
00ffab8f62
optimisation: combine if statements in Sensors menu
...
FINDA status is always 0 or 1
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
7ff514621c
cleanup: remove unused global variable
2023-04-15 13:45:09 +00:00
69b4696114
use lcd_puts_P instead of lcd_printf_P
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
66bb9bcfe4
optimisation: lcd_temp_cal_show_result
...
result is boolean so always update the EEPROM
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
bd796a2cb3
optimisation: more lcd_putc_at
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
70dadc4202
M115: Extruder count is always 1
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
62cbc829f6
optimisation: use new eeprom methods in check_printer_version()
...
Change in memory:
Flash: -48 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
cd8a22d6b3
optimisation: utils: don't initialise global variables
...
They will be set by fCheckModeInit() by reading from EEPROM
Change in memory:
Flash: -2 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
7a8dfdae53
optimisation: use new EEPROM init method for fCheckModeInit
...
Change in memory:
Flash: -90 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
6aafbe69a8
cleanup: remove unused function declaration
2023-04-15 13:45:09 +00:00
6e02a082e2
cleanup: make heating_status_counter static
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
ab934f8ba5
optimisation: make clock_interval static and 1 byte
...
Change in memory:
Flash: -16 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
66e629ba74
cleanup: remove unused variable FSensorStateMenu
2023-04-15 13:45:09 +00:00
3cd97a5e8f
optimsation: draw cursor and set position with one function
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
2120d17912
optimisation: simplify T-code response for single material
...
Extruder is always 0
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
420f745bed
optimisation: mmu: combine if statements
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
4d90ecbcc4
cleanup: remove ctype include
...
We don't use any function from this header
No change in code size
2023-04-15 13:45:08 +00:00
3dda8b5c00
optimise fan check selftest code
...
Tested on MK3S+
Change in memory:
Flash: -174 bytes
SRAM: 0 bytes
2023-04-15 11:11:16 +00:00
d6c81dab62
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-15 10:59:58 +00:00
95acdba5fa
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-14 21:31:12 +00:00
8241be273b
Merge pull request #4123 from gudnimg/improve-mmu-status
...
Minor UI fixes for MMU status line during toolchange
2023-04-14 10:46:29 +02:00
f34c1ffeac
Fix an issue where visualisation is overwritten by SD file name
...
We should let EndReport set the custom message type state to Status
This will ensure the SD file name is shown correctly AFTER we've shown
the visualisation
Currently the visualisation is cut off in the middle by ReportProgressHook
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
4b3dc65598
Don't always set MSG_WELCOME at end of toolchange
...
This should only be set when NOT printing
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
c15ea67379
Merge pull request #4119 from leptun/kill_reset
...
Postponed kill() message with softReset
2023-04-14 08:51:02 +02:00
41b8279805
Fix eeprom table addresses
2023-04-13 11:34:18 +02:00
af4a3f3328
Reorder eeprom reads
...
Saves 4B of flash
2023-04-13 11:15:17 +02:00
f333d36e47
Use a different location as a kill message pending flag
...
The old implementation would fail if the message was in progmem at address 0xffff or 0x0000 (both unlikely). It would also fail if the eeprom was initialized to some other random value, which could have been dangerous when displayed as a full screen message.
2023-04-13 10:57:00 +02:00
4b65d49512
Move kill check earlier during startup
2023-04-13 10:57:00 +02:00
2aca89d6dc
Update eeprom documentation
2023-04-13 10:57:00 +02:00
f388d8abb6
postponed kill() message with softReset
2023-04-13 10:57:00 +02:00
82343184e7
Merge pull request #4036 from gudnimg/optimise-mmu-silent-mode
...
optimisation: MMU silent mode toggling & init
2023-04-13 10:54:21 +02:00
193bce7f20
Merge pull request #4037 from gudnimg/optimisation-tmc2130-stuff
...
Optimisation: Disable M351 when using TMC2130 and code related to it
2023-04-13 10:54:08 +02:00
3cd125c566
MeatPack gcode compression support
2023-04-13 10:50:15 +02:00
3b9d1b8980
Merge pull request #4138 from gudnimg/menu-fixes-gudni
...
Fix broken editing menu
2023-04-13 10:16:19 +02:00
e4bedf0523
Merge pull request #4133 from gudnimg/xyzcal-opt
...
Reduce XYZ cal code size
2023-04-12 21:35:58 +02:00
6c6f98fb03
Merge pull request #4134 from gudnimg/tmc2130_home_exit-opt
...
tmc2130: simplify parsing axis mask
2023-04-12 21:35:46 +02:00
c16e7733e9
Merge pull request #4141 from gudnimg/double-feedback-xyz-cal-menu
...
menu: Fix an issue with feedback double triggering in XYZ cal menu on knob click
2023-04-12 21:29:24 +02:00
Guðni Már Gilbert
Alex Voinea
3d-gussner
Scott Mudge