4f0af648fb
Save/restore feedmultiply independently of the feedrate
2019-11-28 17:16:36 +01:00
6ecff003b7
Fix M600 insertion by the filament sensor
...
Remove incorrect usage of stop_and_save_print combined with the
fsensor_recovert internal instruction which would result in a
broken sequence of events and/or broken stack.
Re-use the now safe stop/recover functions in the same spot
(fsensor_checkpoint_stream) to effectively cut a hole in the current
gcode stream to insert an M600 instruction, which removes all
recursive behavior without the need of extra state variables.
2019-11-28 17:13:37 +01:00
4268c2fdae
Fix recovery from relative/chunked moves
...
When starting to replay existing USB/SD commands from a recovery state,
an immediate relative move needs to compensate for a previously
interrupted move. This is almost the norm for the E axis.
Instead of saving the relative status of the move (which needs to
account for the world2machine conversion and is not always available on
a chunked move split by MBL) save directly the calculated target
position for the move in the original plan, which is easy to replay.
2019-11-28 16:42:35 +01:00
faa9e925fe
Replace a few loops with set_current_to_destination()
2019-11-28 15:57:21 +01:00
5fa7c178b5
Do not set current_position in mesh_plan_buffer_line
...
This is a task which _has_ to be performed by the caller,
such as prepare_move().
2019-11-28 15:57:21 +01:00
0f6b9b4051
Unroll the stack in restore_print_from_ram_and_continue
...
While handling moves in a recursive plan, such a filament check,
ensure restore_print_from_ram_and_continue unwinds the stack by
aborting early from any call that waits on the planner.
This currently only handles G1 moves, but hard-coded behavior that can
trigger recursive behavior (such as filament change) will probably have
to be checked too.
2019-11-28 15:57:20 +01:00
404802b5e6
Clear "sdprinting" state only when all SD moves are complete
...
Ensure card.printingHasFinished sees all the planned moves before
clearing sdprinting. To do that, we need to ensure all SD commands
exited the command queue.
2019-11-28 15:57:20 +01:00
660b646b57
RR Wiki for Dcodes
...
open D-1, D80, D81, D106, D2130
2019-11-27 11:29:55 +01:00
475551431c
How does M862.5 P works???
2019-11-26 20:21:05 +01:00
84cb373905
More G codes documented in RR wiki
...
M44, M45, M47, M403, M509, M851, M601, M602, M603, M862
2019-11-26 20:11:55 +01:00
5eaf6f0133
Merge branch 'MK3' into MK3-Gcode_documentation
...
Merge with MK3 branch
2019-11-26 12:48:21 +01:00
35ce2896bb
Merge pull request #2339 from leptun/PFW-943
...
PFW-943: IR sensor gen. II - Updated PR
2019-11-25 06:23:24 +01:00
abb220ff69
Merge pull request #2323 from Panayiotis-git/MK3_Fix_M603
...
Add oversighted ‘break’ statement at the M603 command's source
2019-11-25 06:04:41 +01:00
982c4cbf7b
Candidate fix for homing fail hard reset
2019-11-21 18:51:02 -05:00
45b89c5728
Fix typo
2019-11-19 13:55:37 +02:00
e66574ac5f
Updated branch to use TOGGLE
2019-11-19 13:51:10 +02:00
6e2793566c
Merge branch 'MK3' into PFW-943
2019-11-18 14:43:46 +01:00
b077303156
Fix compile error
2019-11-17 11:10:13 +02:00
14104e7bf9
Clear error flag when fanError is disabled
2019-11-17 10:44:11 +02:00
2e0034d915
Update Toggles and Translations
2019-11-17 09:53:14 +02:00
359c447127
Do not check for fanError if it is not enabled on resume
...
Fix typos
2019-11-16 22:44:34 +02:00
07b6173aaa
Merge branch 'MK3' into MK3-PFW-1024
2019-11-16 11:28:29 +02:00
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset
...
Show current Z offset in reset dialog before first layer calibration
2019-11-15 17:52:29 +01:00
460f6c3b5e
update message
2019-11-15 17:47:39 +01:00
86ea24c364
Merge pull request #2273 from wavexx/do_not_wait_for_disabled_heater
...
Do not wait forever if the heater on the extruder is disabled
2019-11-15 17:19:11 +01:00
715794d854
Merge pull request #2092 from leptun/MK3_Translations
...
PFW-1062: Mk3 Toggle and Translations
2019-11-15 16:53:17 +01:00
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display
...
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
2019-11-15 16:07:51 +01:00
f6c35c5d5f
Removed separate fix for #2089
...
Per PR fix request
2019-11-15 08:58:58 -05:00
8fae50ec79
Merge pull request #2315 from mkbel/finda
...
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
2019-11-15 12:53:01 +01:00
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
9e780f0b2b
remove ESC sequence
2019-11-15 09:26:56 +01:00
23cf076242
Add oversighted ‘break’ statement at the M603 command's source
2019-11-12 21:32:39 +02:00
11428388c6
MBL toggle and cleanup
2019-11-09 20:58:56 +02:00
20a59f5f40
Temp cal.
2019-11-08 19:44:48 +02:00
422e7fde4a
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-08 18:16:56 +01:00
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN
...
Fix short filenames scrolling in sdprint menu and status screen
2019-11-08 16:52:53 +01:00
21dd8eadd1
Merge pull request #2188 from mkbel/cut_last_try
...
Use MMU cutter only as last resort.
2019-11-08 16:49:28 +01:00
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround
...
SD Scroll workaround
2019-11-08 16:48:38 +01:00
4cf2f05d1d
Merge pull request #2057 from leptun/MK3_fix_M350
...
M350 for all axis - MK3
2019-11-08 16:15:15 +01:00
a14d7545a5
Update Marlin_main.cpp
2019-11-08 16:06:42 +01:00
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function
...
Fix the LCD pause function
2019-11-08 14:55:13 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
5bd995b21b
Added more info to doxygen G-Codes
2019-11-06 11:14:06 +01:00
e6eeafd20c
More M-Commands ...
2019-11-05 15:47:04 +01:00
ca234a11ed
M-Commands to M240
2019-11-05 12:40:51 +01:00
8114bd5b1c
Merge with MK3 and few spaces
2019-11-05 09:05:05 +01:00
58404b9c9d
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-05 09:04:52 +01:00
e56cb14bb9
Merge pull request #1739 from draeath/MK3-fix-sdcard-sorting
...
use modification times for sdcard time sorting. fixes #477
2019-11-04 17:31:38 +01:00
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
459385708e
Fix MMU needs user attention Statistics error
2019-11-02 13:15:13 +02:00
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
4501f9d760
M commands documentation #2
2019-10-31 15:46:23 +01:00
c899320590
Fix M81 Turn off Power Supply...
...
... as it should be active if PS_ON_PIN is defined and assinged to an actual pin.
2019-10-31 15:08:07 +01:00
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
ce8dbb5013
M commands documentation #1
2019-10-30 18:52:25 +01:00
b9dca5f895
other doxygen format changes
2019-10-30 15:52:27 +01:00
d472f0730c
Change doxygen format
2019-10-30 15:50:23 +01:00
986ac95c45
G codes documented ... next M commands
2019-10-30 11:19:51 +01:00
8f05627747
Update #1 gcodes doxygen documentation
...
added some RepRap G-codes Wiki external links.
2019-10-25 13:04:04 +02:00
023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
b603528bfd
Merge pull request #2291 from DRracer/lang-381-fixes-4
...
Lang 381 fixes 4
2019-10-23 15:04:39 +02:00
e25befa175
Fix include guard to silence duplicate declaration warnings
2019-10-22 15:49:10 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
4943e17bda
Preserve power during PP by turning off backlight
2019-10-19 18:45:31 +03:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
d432c3644d
Enable beeping after fan error is fixed
2019-10-18 09:13:19 +03:00
ea8d9ae49d
Merge branch 'MK3' into MK3_Octoprint_fIxes
2019-10-18 08:45:22 +03:00
ace1d7049a
Reenable command processing when issue is fixed if printer not active
2019-10-17 17:49:15 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT
...
PSU_DELTA fix force_high_power_mode()
2019-10-16 13:22:22 +02:00
7f3ba499a0
Do not wait forever if the heater on the extruder is disabled
2019-10-15 20:54:00 +02:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
e3ac2e2509
PSU_DELTA fix force_high_power_mode()
2019-10-10 19:01:57 +03:00
219a5e0625
Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear.
2019-10-03 21:25:52 +02:00
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
7feb763643
Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check.
...
Fix wizard not starting after Factory RESET / All Data on MK25 printer.
This was broken by:
Author: leptun <voinea.dragos.alexandru@gmail.com>
Date: 3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8
2019-10-02 18:38:46 +02:00
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
2019-10-01 22:57:59 +02:00
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
6bd35bfa2f
Increase MENU_DEPTH_MAX to 7 to allow sheet calibration with MMU
2019-10-01 19:43:30 +03:00
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
543ad6eb41
Ask to reset Z offset before first layer calibration.
2019-09-30 19:58:09 +02:00
9d57f9c365
Fix fan_error_selftest() mistake
2019-09-30 20:30:09 +03:00
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
30f325c81d
Extract fan_error_selftest to function for readability
2019-09-30 20:01:31 +03:00
aa50479da5
Merge pull request #2231 from MRprusa3d/PFW-873c
...
default nozzle diameter for farm mode
2019-09-30 18:36:25 +02:00
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
d31abd4bce
Merge pull request #2240 from leptun/MK3_fix_SD_workDirDepth
...
fix workDirDepth not reset after card init.
2019-09-30 17:32:46 +02:00
bf09eb943d
fix workDirDepth not reset after card init.
2019-09-29 21:09:11 +03:00
8c7015df53
Document set current command.
2019-09-27 15:42:31 +02:00
ff9a6c8177
Prevent fan error while checking fan functionality
2019-09-26 20:52:29 +03:00
dfd3f34351
Check for minimum fan speed. Should be achievable by both fans in 1s.
2019-09-25 22:35:35 +03:00
9c22692827
Fix Cancel Print command processing
2019-09-25 22:34:31 +03:00
4d149f0dfa
Do not send useless keepalive messages after print is canceled from lcd
2019-09-25 18:50:29 +03:00
532d1fc4ae
Fix "Resume Print" missing when doing a normal pause
2019-09-25 18:32:35 +03:00
14b72d2b46
Prevent timeout when printing from SD with USB host connected
2019-09-25 18:12:19 +03:00
c3b7b5ebb5
Check fans before resuming
2019-09-25 15:58:07 +03:00
89de5aac77
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
3c17f7e145
No need to check the fan in the menu
2019-09-22 14:04:58 +03:00
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
139c37c744
allow only one string translation constraint defintion per line
2019-09-20 13:01:07 +02:00
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
2afeb65811
return failStatsFmt that fell out in merge
2019-09-19 18:39:25 +02:00
f50cef8361
Merge remote-tracking branch 'upstream/MK3' into translations-doc
...
and resolve ultralcd.cpp conflicts
2019-09-19 18:10:20 +02:00
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes
...
dialogs' layouts fixes + FR polished
2019-09-19 16:33:26 +02:00
17cca89993
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-18 15:17:28 +02:00
e7273ea505
Fix [French translation] Wrong display during mesh bed calibration #2218
...
minor code/doc improvements
2019-09-18 12:49:44 +02:00
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy
...
Mk3 miniopravy
2019-09-18 11:34:17 +02:00
9ff0b7c3a5
Merge pull request #2199 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-18 11:05:23 +02:00
19a8537901
Document.
2019-09-17 20:35:18 +02:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
14933f6b0e
Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last
...
string parameter from PROGMEM
2019-09-17 16:50:51 +02:00
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
695f938348
Fix conversion warnings
2019-09-14 12:24:45 +03:00
e828798209
Fixes after merge and line buffer
...
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
2019-09-13 21:21:42 +03:00
Yuri D'Elia
3d-gussner
DRracer
vintagepc
Alex Voinea
MRprusa3d
Panayiotis-git
Marek Bel
XPila
Marek Běl
MRprusa3d
D.R.racer
michalrudolf