edad625cf7
RIP Bondtech long live the Extruder
2022-09-16 16:31:27 +02:00
37cde856e9
Rename Auto_deplete to Spool_join
...
Fix some missing MSG_ c= r=
2022-09-16 16:25:47 +02:00
166ecbc7d8
PFW-1362 Fsensor is not required for Spooljoin
...
Since the Fsensor is not required to use SpoolJoin,
it makes little sense to me that we need the fsensor
to "enable" SpoolJoin
2022-09-16 10:23:47 +02:00
d51026d8f7
PFW-1362 Rename settings for consistency
2022-09-16 10:23:47 +02:00
715af8fcc2
Rename files to SpoolJoin
2022-09-16 10:23:47 +02:00
afc67332c7
PFW-1362 Initial commit
2022-09-16 10:23:47 +02:00
2276217cbb
Optimisation: Remove forceMenuExpire variable
...
During first layer calibration we have the live Z baby step menu
on the LCD and the user can tune their Z offset live.
Once the first layer calibration is done, we want to exit the menu
immediately. For this purpose it is much more efficient to
call lcd_return_to_status(). There is no visual difference
on the LCD for the user.
Change in memory footprint:
Flash: -34 bytes
SRAM: -1 byte
2022-09-16 10:23:47 +02:00
27ff01cf91
Shorter code
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
f49b88c1a1
Optimisation: lcd_commands "M702 C" should be "M702"
...
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
f297131792
M600: lcd_change_fil_state does not need to be global
...
Refactor lcd_alright() to save flash
Change in memory:
Flash: -98 bytes
SRAM: -1 bytes
2022-09-16 10:23:47 +02:00
03b8a6e464
Use raise_z in more places
...
Change in memory:
Flash: -474 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
4758ac3f1b
PFW-1399 Don't show cut filament menu if setting is not enabled
2022-09-16 10:23:47 +02:00
66994d010d
Fix a few cases where rebase overwrote stuff
2022-09-16 10:23:47 +02:00
37b50477cd
Fixup after rebase onto MK3
2022-09-16 10:23:47 +02:00
dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
0a90c7ffda
PFW-1386 Use Marlin 2 unload sequence for single material
...
The current unload sequence does not give good results.
The Marlin 2 sequence looks good on my end. This can be later
used to improve M600
Added all the constants from Marlin 2
2022-09-16 10:22:39 +02:00
099c3a1f1f
PFW-1386 fixup
2022-09-16 10:22:39 +02:00
38952f1f33
PFW-1386 Optimisation: st_synchronize is not needed after raise_z_above
...
Saves 16 bytes of flash
2022-09-16 10:22:39 +02:00
20c865c2d4
PFW-1386 Implement 'U' parameter for M702
...
Similar to 'L' in M701, this does not apply to the MMU
The U parameter controls how much mm the extruder will unload
Default value is 80mm
2022-09-16 10:22:39 +02:00
7e9166976f
PFW-1386 Implement 'L' parameter for M701
...
It is only used when the MMU is disabled. With the MMU we use a defined ramming sequence.
When the MMU is disabled I borrowed the usages from Marlin 2.
The L parameter only defines the length for the "fast" load length.
Default value is 70mm, same as M600
2022-09-16 10:22:39 +02:00
d6564d3617
PFW-1386 if automatic = false, raising Z-axis is done via gcode
2022-09-16 10:22:38 +02:00
5b184d885c
Add LCD_BUTTON_TIMEOUT to enum
2022-09-16 10:22:38 +02:00
2fc8b50f11
Fix lcd_show_multiscreen_message_yes_no_and_wait_P after rebase
2022-09-16 10:22:38 +02:00
09cb9c6ecd
Fixup after rebase + discussion
2022-09-16 10:22:38 +02:00
6bf2aebf04
Fix typo
2022-09-16 10:22:38 +02:00
80c640deb9
PFW-1373
...
Fix the unload procedure when the user has paused a print
then stopped the print after the temperature has reached below 175°C
Now the E-motor will move as expected
2022-09-16 10:22:38 +02:00
2aa6cfc1ab
Optimise mmu_cut_filament_menu ( #40 )
...
preheat_or_continue should be used here to reduce copying code
2022-09-16 10:22:38 +02:00
f94c2cba46
Fix rendering temp. + toolchange on MMU error screen
2022-09-16 10:22:38 +02:00
dab26fe50b
Report detected MMU version in the Support menu
...
It was just subtly broken, all the functionality had already been implemented.
2022-09-16 10:22:38 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
8aa16a6429
Write documentation for lcdui_print_extruder
2022-09-16 10:22:38 +02:00
8fd1653b84
PFW-1343 initial commit
2022-09-16 10:22:38 +02:00
e8088b0161
Allow reset if the EEPROM is set to "on"
2022-09-16 10:22:38 +02:00
73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
1ff7459743
Re-enable filament runout + add debug msgs
...
Needs a fix on the MMU side (report FeedToBondtech::DisengageIdler)
2022-09-16 10:22:38 +02:00
bd932b3b10
Cleanup: Fix two compiler warnings
2022-09-16 10:22:38 +02:00
352a22c22e
Cleanup: Remove unused callback
...
Remove unused callback in lcd_show_multiscreen_message_with_choices_and_wait_P
2022-09-16 10:22:38 +02:00
0e75a03c8c
Reuse FSensor runout blocking impl. throughout the whole FW
2022-09-16 10:22:38 +02:00
eed816d9de
Fix build
2022-09-16 10:22:38 +02:00
d7270e0b80
Fix lang build
2022-09-16 10:22:38 +02:00
5082da78d2
Convert button on LCD into button for MMU
...
- Dependent on current MMU error being processed
- Includes rename of LEFT_BUTTON_CHOICE -> LCD_LEFT_BUTTON_CHOICE (and right, middle as well) to avoid confusion with MMU buttons' ordering
2022-09-16 10:22:38 +02:00
0bd3dfdcf7
This starts to print ;)
...
Temporarily disabled filament runout as this breaks ToolChange operation
yet for unknown reason.
2022-09-16 10:22:38 +02:00
33650c6e56
Remove redundant call to lcd_update_enable
2022-09-16 10:22:37 +02:00
f1803357b0
Fix default selection after changes in PFW-1312
...
The Yes and No are reverted. Before PFW-132 Yes is 1 and No is 0
Now they are Yes is 0, and No is 1
2022-09-16 10:22:37 +02:00
45edc69cc4
Add back menu it confirm if extrusion has correct color after loading to nozzle via LCD
...
I've added the call to this message via the menu function to ensure it
only appears when interacting with the LCD
2022-09-16 10:22:37 +02:00
1c26875e0e
PFW-1318 Implement callback to render status line
...
To render the thermometer and degree symbols
the CGRAM table will instead swap out
the feedrate and clock symbol when
lcd_set_custom_characters_nextpage()
is called.
2022-09-16 10:22:37 +02:00
452f39dc4b
fixup
2022-09-16 10:22:37 +02:00
3b0fba14ac
Remove unused parameter nlines to simplify things
...
This allows us to remove one overload
of lcd_display_message_fullscreen_P
2022-09-16 10:22:37 +02:00
68b007c759
Fix compile-time conversion MMU2 ErrorCode -> Prusa-Error-Code
...
and hide some of the implementation details into mmu2_error_converter.cpp
which makes the code in mmu_reporting.cpp much easier to read.
2022-09-16 10:22:37 +02:00
138a0d21c7
Change default selection parameter from bool to uint8_t
...
This allows us make any of the three button choices the default selection
2022-09-16 10:22:37 +02:00
3d-gussner
Guðni Már Gilbert
D.R.racer
VintagePC