f3379b57b1
Merge pull request #8 from PavelSindler/MK3
...
recover print after blackout
2017-07-06 12:55:50 +02:00
458dfa80f6
Merge branch 'MK3' into MK3
2017-07-06 12:55:30 +02:00
16fffed52d
current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s
2017-07-05 15:04:43 +02:00
2c102f8580
fixed SD card restore position (power panic)
2017-07-05 09:16:33 +02:00
ef7a302626
power panic: Z axis is lowered in position where print starts (is recovered)
2017-07-04 20:58:44 +02:00
9e3d608ba0
Merge branch 'MK3' of github.com:prusa3d/Prusa-Firmware-DEV into MK3
2017-07-04 16:25:53 +02:00
5ab57ab2ad
Init LCD ASAP for a nice UX
2017-07-04 16:25:30 +02:00
220cadab3e
Merge pull request #9 from XPila/MK3
...
DEBUG defines, variant files for MK3
2017-07-04 16:24:38 +02:00
b8025e63e6
DEBUG defines, variant files for MK3
2017-07-04 16:23:28 +02:00
a8678cb2fd
recover print
2017-07-04 11:31:39 +02:00
d05e62813a
Merge remote-tracking branch 'upstream/MK3' into MK3
...
sync with upstream
2017-07-03 14:08:39 +02:00
4ae5751d95
added debug messages for serial
2017-07-03 14:08:27 +02:00
4480aa3b6a
Merge pull request #7 from XPila/MK3
...
TMC2130 stallguard homing - sg_thrs_x and sg_thrs_y - command M916, l…
2017-07-03 10:41:12 +02:00
176c32de91
TMC2130 stallguard homing - sg_thrs_x and sg_thrs_y - command M916, lcd_silent_mode_set_tune
2017-07-03 10:39:56 +02:00
b00ca2a103
Merge pull request #6 from XPila/MK3
...
TMC2130 tuning, silent/high power mode
2017-07-03 07:45:05 +02:00
e09f0c64c7
TMC2130 tuning, silent/high power mode
2017-07-03 07:43:50 +02:00
e66507215b
Merge pull request #5 from XPila/MK3
...
TMC2130 tunning, overtemp
2017-07-03 00:12:44 +02:00
c4307c7373
TMC2130 tunning, overtemp
2017-07-03 00:11:42 +02:00
17074e1d25
saving/restoring filename and current position in bytes to eeprom, UVLO changed
2017-07-02 21:01:23 +02:00
29499510f4
Merge remote-tracking
...
pins
branch 'upstream/MK3' into MK3
pin number correction
2017-07-02 16:10:14 +02:00
db12119b68
position saving and restoring in UVLO
2017-07-02 00:11:21 +02:00
75dbb825dc
Merge pull request #4 from XPila/MK3
...
Pin number correction (TACH_0)
2017-07-01 19:34:57 +02:00
8b66258745
Pin number correction (TACH_0)
2017-07-01 19:33:56 +02:00
ae0c64248f
sync with upstream
2017-07-01 19:29:57 +02:00
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
a7da9bde05
Merge pull request #3 from XPila/MK3
...
renamed EINY 0.1a to EINY 0.3a
2017-07-01 17:31:22 +02:00
4f9a8147a4
renamed EINY 0.1a to EINY 0.3a
...
added EINY 0.4a
changed jerk (optimized for MK3 silent mode)
2017-07-01 17:28:32 +02:00
2eb0756575
Merge pull request #2 from XPila/MK3
...
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
2017-07-01 12:42:06 +02:00
f6a8e1df9d
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
...
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
c839209780
Merge pull request #1 from PavelSindler/MK3
...
fan speed check initial version, selftest updated, 3.0.12-RC2 sync
2017-06-30 10:56:53 +02:00
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
0578ea527e
fan speed check initial version, selftest updated
2017-06-28 14:24:45 +02:00
fd2a1f1df4
Resolution setting fixed
2017-06-17 20:54:59 +02:00
6f3c28c4a7
Filament sensor PAT9125 implemented
2017-06-17 20:40:22 +02:00
21177476ac
StallGuard homing implemented, working
2017-06-17 16:58:36 +02:00
3e642d61cb
Stepper Y inverted, current lowered.
2017-06-17 15:58:26 +02:00
c83b1833bc
Johhny Firmware sync
2017-06-17 15:42:48 +02:00
1224705edc
Added EINY config
2017-03-24 20:16:29 +01:00
cabaec95c8
EINY implementation
2017-03-24 20:16:03 +01:00
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
99ae9707de
Fixed a missing SD card error on start up, if the setup was blocked
...
by some dialog for an extended period of time.
Increased version to 3.0.8 final.
2016-09-01 16:52:46 +02:00
fe61647e68
Multi screen messages will display a "next page" indicator
...
if a next page follows.
2016-09-01 15:14:55 +02:00
50a0ca8519
Italian translations.
2016-09-01 14:10:41 +02:00
25024d8975
Added Spanish translations.
2016-09-01 14:07:27 +02:00
163db2f362
Fixed a bug in the optimized fixed point planner.
2016-09-01 13:31:50 +02:00
25b4675823
Updated Polish texts.
2016-09-01 13:13:21 +02:00
29cb4b2b5d
Removed the non-working pressure advance feature.
...
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 13:09:56 +02:00
930ed11e90
Updated texts.
2016-09-01 11:19:32 +02:00
b470e103dc
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
2016-09-01 10:44:24 +02:00
26405ee16f
Syncing with 3.0.7 public
2016-08-31 17:12:05 +02:00
XPila
PavelSindler
Andre Sklenar
michalprusa
bubnikv