f46be49f7d
Tighten parsing of M0/M1/M117/PRUSA
...
Expect these to be always at the start of the command (which is now
stripped of the extra line number), reducing the number of corner cases
due to these not following the g-code spec.
2022-12-30 14:06:48 +01:00
7c896a87a4
Remove '*' (checksum) handling in process_commands
...
The checksum is already removed from the command queue so there's no
need to reprocess it in the main loop.
2022-12-30 14:06:48 +01:00
797513d3c5
Remove T parameter from M221
...
Fixes #3852
2022-12-30 13:07:56 +01:00
cc3d36c78f
Replace labs with fabs
...
Both degHotend and degTargetHotend return a float
In this case it is better to use fabs()
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2022-12-29 08:54:50 +01:00
03511a5a7c
Remove redundant ultralcd includes in Marlin_main
...
This also removes two definitions
- ULTRALCD
- LCD_USE_I2C_BUZZER
Neither of them are defined anywhere
2022-12-27 12:03:56 +00:00
9757502abc
Remove pins_arduino.h include
...
This header is already included with Arduino.h which
is included in Marlin.h header.
2022-12-27 12:03:14 +00:00
72857c902c
drop conv2str dependency in Marlin_main
2022-12-27 11:59:22 +00:00
0bcb4ab59d
Merge pull request #3822 from wavexx/tm_partial_lock
...
MK3: TM: Prevent lockout on invalid model values
2022-12-20 14:13:56 +01:00
2b38080c7e
Merge pull request #3833 from leptun/MK3_fix_MK2.5_softReset
2022-12-20 10:02:14 +01:00
65f5b9e53d
Merge pull request #3818 from wavexx/tm_default_state
...
TM: Provide full defaults for model data and enable it by default
2022-12-20 07:08:25 +01:00
4c32e8b403
PFW-1457 make CHECK_FSENSOR into a function
2022-12-18 12:23:20 +00:00
0972ef70d0
Use menu_set_block() in ThermalStop()
...
Set a menu block for fatal thermal errors instead of abusing
lcd_return_to_status() to kick the user out of the menus.
This now allows a thermal model error to be recoverable through menu
access.
2022-12-17 16:42:22 +01:00
6e2f016655
TM: Clear the Stopped state when stopping the current print
...
We allow resuming from the LCD via start print and resume print,
it makes sense to clear the error on stop too.
For this reason distinguish whether the action is performed
automatically or manually (ie: interactively).
The error is only cleared when the command is run interactively.
2022-12-17 16:11:31 +01:00
c5d406d12f
Fix interrupts not enabled during setup()
2022-12-16 16:46:08 +01:00
2e7c237a17
Cleanup: remove automatic parameter from unload_filament()
...
In M600 and M702, the Z-lift is taken care of outside this function
so it makes no sense to have a Z-lift within unload_filament()
Only exception to this is in the wizard, there I moved the Z-lift to
happen before we start heating the nozzle.
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2022-12-16 16:20:09 +01:00
d43a7da20d
fix watchdog not getting disabled on user app boot
2022-12-16 16:01:29 +01:00
d80e32fa31
retrigger build
2022-12-16 12:55:30 +01:00
e8c8945650
Disable the watchdog early in the program
2022-12-16 12:25:44 +01:00
451f601697
Fix MK2.5 softReset()
2022-12-16 12:10:47 +01:00
5c4ec5dd4f
TM: Do not lockout the menus on thermal errors
...
This prevents the ability to run gcode from the SD card.
In a thermal error with faulty values, and without serial access, this
is the only way to process an M310 instruction and recover.
2022-12-13 18:38:26 +01:00
4e7c830661
Remove M999 remnants
...
This was already removed in fc10ca3146
2022-12-12 17:52:48 +01:00
70451b6bd3
Turn off print fan while restoring print from RAM
2022-12-10 09:53:43 +00:00
40cc6dcb6d
Merge pull request #3783 from leptun/enable_PRUSA_SN_all_variants
...
Allow "PRUSA SN" to print the SN in eeprom on all variants
2022-12-09 14:51:57 +01:00
52965bd05d
Avoid using global variables
...
Flash: -68B
RAM: -4B
2022-12-05 16:43:51 +01:00
074b62361f
Fix #3788
...
fSetMmuMode needs to be called
in order for the commands to work:
M862.2 Q
M862.3 Q
2022-12-05 16:43:51 +01:00
54ef2a6c28
Merge pull request #3769 from 3d-gussner/MK3_Temp_model_cal_wizard
...
PFW-1434: MK3 Temp model calibration during wizard
2022-11-30 15:33:38 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
281a217549
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 10:49:46 +01:00
d592586d94
cleanup: remove dead code lcd_adjust_z()
...
It's only used when MESH_BED_LEVELING is not defined. According to
the configuration files, all printers supported use MESH_BED_LEVELING.
So I think we are safe in removing this dead code.
2022-11-19 22:19:48 +00:00
411d1da3c8
Merge pull request #3763 from gudnimg/optimisation-float-conversions
...
optimisation: TCodes accepts `uint8_t` not `float`
2022-11-18 19:52:22 +00:00
58775b8b55
Change unsigned long to uint32_t
2022-11-18 14:50:07 +01:00
8f4ac82273
eeprom_init_default also returns the read/default value
2022-11-18 14:50:07 +01:00
dcc48c0052
Remove eeprom _int8t functions
...
flash: -48B
RAM: -4B
2022-11-18 14:50:07 +01:00
ca943cceec
Split the increment function into increment and add
...
No size difference since the compiler did a good job optimizing the inc argument (always 1 before).
2022-11-18 14:50:07 +01:00
455c29e78b
Optimize EEPROM usage/functions
2022-11-18 14:50:07 +01:00
c86c961d4e
M600: Fix bug where fan is not turned off
...
The firmware saves the current fanspeed before parking,
and the fanspeed is restored after unparking. The problem is the fan
was never actually paused.
Fixes #3670
2022-11-18 11:18:29 +01:00
30ec4e8b53
Inital Temp Model cal wizard
2022-11-17 15:19:35 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
509813f60b
optimsation: TCodes accepts uint8_t not float
...
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2022-11-12 16:50:45 +00:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
0af7d28074
PFW-1397 Allocate EEPROM memory for toolchange counter
2022-11-08 13:49:40 +01:00
8543942acb
Fix Z-leveling
2022-11-03 06:22:57 +01:00
45c72d48ed
optimisation: use failstats_reset_print in factory_reset_stats
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2022-10-23 09:58:56 +00:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
992845198d
Merge pull request #3648 from wavexx/more_cleanups
...
cleanup: Expand tabs to fixup suspicious indentation warnings
2022-10-03 11:53:42 +02:00
4cc6695195
cleanup: Expand tabs to fixup suspicious indentation warnings
2022-10-02 20:42:36 +02:00
1d520f9165
cmake: Make builds fully reproducible by default
...
- Work-around SOURCE flags being reset for each project when setting the
random-seed property by calling a support function.
- Likewise, set correct flags for reproducibility when creating archives.
- Strip source prefix paths from debug info
This should set the EPOCH using the last git commit date when available,
but it's not currently implemented. Just set the EPOCH to be 0 for now.
2022-10-02 20:32:32 +02:00
74e15ac233
Rename EN_ONLY to EN_FARM
...
remove DEBUG/DEVEL/ALPHA/BETA lcd warning
2022-09-29 16:39:02 +02:00
c7b500af1e
BETA firmware message only in English
...
Rephrase BETA firmware message to fit on two screens
ALPHA message same as DEVEL
Fix ALPHA DEVEL message
2022-09-29 10:48:16 +02:00
f7d4095479
Merge branch 'MK3' into MK3_MMU2_fix1
2022-09-21 15:18:44 +02:00
Yuri D'Elia
Guðni Már Gilbert
3d-gussner
Alex Voinea
Alex Voinea
D.R.racer
DRracer