f6135f2ed1
Enable Analog IR sensor again
2023-04-16 13:58:18 +00:00
f5b9d2ac2e
cleanup: Remove unused Developer define
2023-04-16 13:13:16 +00:00
2ed4a75894
cleanup: remove unused settings
2023-04-16 13:13:16 +00:00
559e1bb21a
Remove unused MMU configs
...
- MMU_IDLER_SENSOR_ATTEMPTS_NR
- MMU_REQUIRED_FW_BUILDNR
These are no longer used
2023-04-16 13:13:16 +00:00
f34c1ffeac
Fix an issue where visualisation is overwritten by SD file name
...
We should let EndReport set the custom message type state to Status
This will ensure the SD file name is shown correctly AFTER we've shown
the visualisation
Currently the visualisation is cut off in the middle by ReportProgressHook
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
4b3dc65598
Don't always set MSG_WELCOME at end of toolchange
...
This should only be set when NOT printing
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
41b8279805
Fix eeprom table addresses
2023-04-13 11:34:18 +02:00
af4a3f3328
Reorder eeprom reads
...
Saves 4B of flash
2023-04-13 11:15:17 +02:00
f333d36e47
Use a different location as a kill message pending flag
...
The old implementation would fail if the message was in progmem at address 0xffff or 0x0000 (both unlikely). It would also fail if the eeprom was initialized to some other random value, which could have been dangerous when displayed as a full screen message.
2023-04-13 10:57:00 +02:00
4b65d49512
Move kill check earlier during startup
2023-04-13 10:57:00 +02:00
2aca89d6dc
Update eeprom documentation
2023-04-13 10:57:00 +02:00
f388d8abb6
postponed kill() message with softReset
2023-04-13 10:57:00 +02:00
82343184e7
Merge pull request #4036 from gudnimg/optimise-mmu-silent-mode
...
optimisation: MMU silent mode toggling & init
2023-04-13 10:54:21 +02:00
193bce7f20
Merge pull request #4037 from gudnimg/optimisation-tmc2130-stuff
...
Optimisation: Disable M351 when using TMC2130 and code related to it
2023-04-13 10:54:08 +02:00
3b9d1b8980
Merge pull request #4138 from gudnimg/menu-fixes-gudni
...
Fix broken editing menu
2023-04-13 10:16:19 +02:00
e4bedf0523
Merge pull request #4133 from gudnimg/xyzcal-opt
...
Reduce XYZ cal code size
2023-04-12 21:35:58 +02:00
6c6f98fb03
Merge pull request #4134 from gudnimg/tmc2130_home_exit-opt
...
tmc2130: simplify parsing axis mask
2023-04-12 21:35:46 +02:00
c16e7733e9
Merge pull request #4141 from gudnimg/double-feedback-xyz-cal-menu
...
menu: Fix an issue with feedback double triggering in XYZ cal menu on knob click
2023-04-12 21:29:24 +02:00
225999b79d
Remove redundant colon characters
...
The Edit menu already applies a colon to the label string
no need to render it twice.
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-12 17:37:57 +00:00
b91941f354
Fix broken editing menu
...
- currentValue must be initialised when entering the menu
- Consume lcd_encoder value when editing an item
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-04-12 17:37:56 +00:00
53e3193252
Fix bug with uint8_t not shown correctly on LCD
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-04-12 17:37:23 +00:00
2fc810289a
Fix an issue with feedback double triggering in XYZ cal menu
...
The feedback is produced due to the user clicking the knob
the menu_goto call should therefore not trigger additional feedback when
switching between menus.
No change in memory
2023-04-12 16:46:33 +00:00
d688f6ec6f
Menu item code: optimize return
2023-04-10 15:29:58 +02:00
b735c3d040
optimisation: extract common code into SETTINGS_FANS_CHECK
...
Implement it as a function instead of preprocessor macro
this allows us to control inlining
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-10 13:24:39 +02:00
9a1eb7b239
Prevent rendering of the remaining menu items if the menu is clicked
...
Also prevent clicking
2023-04-10 13:02:22 +02:00
d3d201730e
Do not return early if the menu item is clicked
...
Just let the menu draw till the end even if an item is clicked. The worst this can do is waste some clock cycles
flash: -1222B
ram: 0B
2023-04-10 13:02:22 +02:00
bfdef3af9f
Fix menu items optimizations when extracting to functions.
...
Properly increment menu_item when the menu item is clicked so that you don't get multiple menu items clicked if in view (when the menu code is deduplicated to functions)
2023-04-10 13:02:22 +02:00
339c080b19
tmc2130: optimize mask when iterating over axes
...
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-09 17:49:28 +02:00
c4b4cbfc7b
Make the function static
2023-04-09 13:40:10 +00:00
afd4f1d5bc
Iterate over axis bits
2023-04-09 15:17:01 +02:00
4e31bb94ef
tmc2130: simplify parsing axis mask
...
There is no need to check if every axis bit with each for-loop
iteration. We just need to check if a given axit bit is set.
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-09 13:12:22 +00:00
e70344dc94
Reduce XYZ cal code size
...
Change in memory:
Flash: -120 bytes
SRAM: 0 bytes
2023-04-09 12:23:42 +00:00
902780a929
Disable M351 when using TMC2130 and code related to it
...
Change in memory (MK3S+ multilang build)
Flash: -250 bytes
SRAM: 0 bytes
2023-04-07 21:07:26 +02:00
449e83c7ff
Fix filament autoloading
2023-04-07 10:36:44 +02:00
2a3e4cac75
Fix toggle menu items rendering
2023-04-07 09:35:31 +02:00
49096f14c3
SD menu do not consume click in _scrolling state
2023-04-07 09:11:49 +02:00
10ba758bf7
Fix menu encoder rotation
2023-04-06 21:35:30 +02:00
373fab883d
Fix fsensor runout conditions
...
And also reorder autoload and runout conditions
2023-04-06 10:37:29 +02:00
dfe6ea6470
Fixup after rebase
2023-04-06 07:44:16 +02:00
c16db4e607
Remove lcd_encoder clamp check
...
as proposed by @leptun
2023-04-06 07:44:16 +02:00
6d2a66c1e8
match menu_goto's encoder type to lcd_encoder type
...
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-06 07:44:16 +02:00
4ca7f8ce2d
cleanup: drop lcd_encoder in _menu_edit_P
...
Taken from PR 3985 by adding currentValue infrastructure
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-06 07:44:16 +02:00
062ea1cf25
optimisation: make lcd_encoder two bytes (int16_t)
...
lcd_encoder was int32_t (4 bytes) because of the menu code
when editing through the menus, the menus only accept
int16_t so it doesnt make sense to use int32_t.
Change in memory:
Flash: -892 bytes
SRAM: -2 bytes
2023-04-06 07:44:16 +02:00
c754c8dd5f
Remove menu code in favor of simplicity
...
This change needs to be approved of course due to it affecting UI
The affect UI is only one menu
lcd_settings_linearity_correction_menu
I doubt many users are using this menu except very advanced users.
I propose we delete the variant of menu_draw_P which was used for
uint8_t but renders them as floats.
Instead treat
uint8_t same as int16_t i.e. just render integers.
Keeping it simple :) Solve our fanSpeed problem.
Change in memory:
Flash: -140 bytes
SRAM: -2 bytes
2023-04-06 06:05:59 +02:00
876ea6c228
Change block buffer fan speed to one byte
...
It's only assigned to variables which are uint8_t
Change in memory:
Flash: -10 bytes
SRAM: -16 bytes
2023-04-06 06:05:59 +02:00
2ced00f21c
Convert fanSpeed and saved_fan_speed to uint8_t
...
These variables only range from 0 to 255
For the menus we currently need to convert fanSpeed to int16_t.
Change in memory:
Flash: -160 bytes
SRAM: -2 bytes
2023-04-06 06:05:59 +02:00
76a8c80ef0
Fix issue with size being wrong at runtime
...
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-04-05 17:52:48 +02:00
7ad137e570
Add preheat_cmd into PROGMEM
...
Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
2023-04-05 17:52:48 +02:00
5ef00fb78a
Reduce code size in first layer calibration
...
Pull out common enqueuing loop into one function
Change in memory:
Flash: -70 bytes
SRAM: 0 bytes
2023-04-05 17:52:48 +02:00
5b04812017
Eliminate subtraction in print time statistic
...
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-05 11:16:54 +02:00
Alex Voinea
Guðni Már Gilbert
3d-gussner
D.R.racer