josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8,017 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

164 Commits

Author SHA1 Message Date
3d-gussner f9bdb8b8aa Add DEBUG_EEPROM_CHANGES 2024-02-27 08:56:18 +01:00
3d-gussner 53c419f52d Basic Printer name in EEPROM 
- Output with M115 works
- ToDo
  - LCD screen
  - M550 gcode
  - Detect length of EEPROM CUSTOM_MENDLE_NAME
 2023-11-18 10:14:07 +01:00
gudnimg 842d029f7e Replace unused EEPROM entry names with placeholders 
_EEPROM_FREE_NRx_ make it a bit more clear this entry is free.
 2023-11-12 16:21:34 +00:00
gudnimg 077aa0a2b8 Minor wording changes 2023-11-12 16:09:15 +00:00
gudnimg 1fc1998874 EEPROM: Formatting cleanup 
Mark unused bytes consistently

Add "Power Panic" into the Feature column for relevant bytes

Change "MMU2/s" to "MMU"
 2023-11-12 14:39:52 +00:00
gudnimg dc280b0d9e power panic: support any valid DOS 8.3 extension 
When a SD file is selected to print
save the DOS 8.3 extension into EEPROM.

After a power outage, the correct file extension is then
selected instead of always assuming it's ".gco"

This allows users to recover ".g" files.

Change in memory:
Flash: +104 bytes
SRAM: 0 bytes
 2023-11-05 16:46:54 +00:00
3d-gussner 2027a54873
Merge pull request #4420 from gudnimg/PFW-1543 
PFW-1543 Save print type in EEPROM
 2023-10-06 09:04:30 +02:00
Guðni Már Gilbert b89c62bd50 PFW-1543 Replace ffh 255 with ^ 2023-10-04 20:57:05 +00:00
Alex Voinea 3e15a24be7 Fix sheet rename resetting characters to blank 2023-10-03 08:19:48 +02:00
gudnimg fcd61a378d power panic: save print type in EEPROM 
The printer should know whether it is recovering a SD print
or a USB print

PFW-1543
 2023-10-01 12:44:49 +00:00
3d-gussner 8ae0e1952e Rename `temp_model.h` to `thermal_model.h` 
`/temp_model` to `/thermal_model`
`Temperature_model` to `Thermal_model`
minor format in eeprom.h
 2023-07-25 17:13:07 +02:00
3d-gussner 940b18e0b2 Format `eeprom.h` doxygen documentation 2023-07-25 17:13:07 +02:00
3d-gussner 600a7a0316 Rename `Temp Model` to `Thermal Model` 2023-07-25 17:13:07 +02:00
3d-gussner 44ae8033eb Rename upper case `TEMP_MODEL` to `THERMAL_MODEL` 2023-07-25 17:13:07 +02:00
Guðni Már Gilbert 4dc5d97ca9 power panic: remove unused EEPROM_UVLO_Z_MICROSTEPS 
It isn't very helpful IMO to have unused code during power panic
it just complicates things.

Change in memory:
Flash: -32 bytes
SRAM: 0 bytes
 2023-07-18 11:29:03 +02:00
3d-gussner 10e2357cc5 Change MMU2 to MMU3 2023-06-27 11:41:09 +02:00
Alex Voinea 41b8279805
Fix eeprom table addresses 2023-04-13 11:34:18 +02:00
Alex Voinea f333d36e47
Use a different location as a kill message pending flag 
The old implementation would fail if the message was in progmem at address 0xffff or 0x0000 (both unlikely). It would also fail if the eeprom was initialized to some other random value, which could have been dangerous when displayed as a full screen message.
 2023-04-13 10:57:00 +02:00
Alex Voinea 2aca89d6dc
Update eeprom documentation 2023-04-13 10:57:00 +02:00
Alex Voinea f388d8abb6
postponed kill() message with softReset 2023-04-13 10:57:00 +02:00
Guðni Már Gilbert 768319f1e7 optimisation: cleanup print statistics 
Change in memory:
Flash: -104 bytes
SRAM: 0 bytes
 2023-04-05 11:16:54 +02:00
Yuri D'Elia d1ff728e4f TM: future-proofing for incompatible model upgrades 
Introduce a model version. This is initialized at "1" and doesn't
require any upgrade/downgrade checks since it's currently
retro-compatible.
 2023-02-17 15:01:59 +01:00
Yuri D'Elia 38b1e64687 TM: Allocate new eeprom parameters for PTC handling 2023-02-17 15:01:59 +01:00
D.R.racer 9b64d122dc Disable MMU2S by default 
On printers without the MMU no error screen should occur and no attempts of communication with the MMU should be performed -> EEPROM_MMU_ENABLED should default to 0.

PFW-1418
 2023-02-17 12:53:07 +01:00
Guðni Már Gilbert 99761bdff7 optimisation: re-use adjust_bed_reset() 
Move the code into eeprom.cpp since we're only working with EEPROM

Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
 2023-02-08 08:01:55 +01:00
Guðni Már Gilbert b28aa6f42a PFW-1471 Rename 'Toolchange count' to 'Material changes' 
Added the string to our message so it can be translated

Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
 2023-02-06 08:33:40 +01:00
3d-gussner ba3ee0b4c6 Fix few values 2023-01-02 15:11:01 +01:00
3d-gussner 20634a3852 Update calibration status v2 documentation 2023-01-02 15:11:01 +01:00
Yuri D'Elia 9a018230ce Replace calibration state with a new calibration bitmap 
- Move calibration status/declarations to util.h
- Allows to query the status of each step independently without assuming
  any order
- Allows to extend the calibration with new steps transparently
 2022-12-30 14:14:01 +01:00
Yuri D'Elia 2552fee4c7 eeprom: Fix EEPROM_HEAT_BED_ON_LOAD_FILAMENT debug offset in docs 2022-12-30 14:14:01 +01:00
Yuri D'Elia 0c042440ee eeprom: Document new calibration state 2022-12-12 18:25:17 +01:00
Panayiotis-git c75c81ce4f Do not heat the bed, on load/unload 
If during a paused print, the preheat is canceled, keep the bed target temperature
Display bed temperatures only if bed is also heated
Remove not needed variables nTargetOld and nTargetBedOld from the mFilamentItem function
Define new Setting "HeatBedOnLoad" [Yes/No]
 2022-12-04 19:26:34 +02:00
Alex Voinea ef83fefce1 More optimization 2022-11-18 14:50:07 +01:00
Alex Voinea 8f4ac82273 eeprom_init_default also returns the read/default value 2022-11-18 14:50:07 +01:00
Alex Voinea b317786110 More configuration store savings 
flash: -94B
RAM: 0B
 2022-11-18 14:50:07 +01:00
Alex Voinea 5305dbd299 Sheet name initialization improvements 
The code looks better, but it takes a bit more flash. I prefer it like this
flash: +20B
ram: 0B
 2022-11-18 14:50:07 +01:00
Alex Voinea 771f833a44 Implement eeprom dword functions 2022-11-18 14:50:07 +01:00
Alex Voinea ca943cceec Split the increment function into increment and add 
No size difference since the compiler did a good job optimizing the inc argument (always 1 before).
 2022-11-18 14:50:07 +01:00
D.R.racer 455c29e78b Optimize EEPROM usage/functions 2022-11-18 14:50:07 +01:00
Guðni Már Gilbert 0af7d28074 PFW-1397 Allocate EEPROM memory for toolchange counter 2022-11-08 13:49:40 +01:00
3d-gussner eaaf1d6872 Rename Sheets 
- `Satin 1` to `Satin  `
- `Satin 2` to `NylonPA`
 2022-10-18 10:20:01 +02:00
Tomáš Jozífek 233174cf86 Fill the doc for the EEPROM value at 0x0DA1 - active_sheet 2022-10-07 11:59:57 +02:00
3d-gussner bab83704a1 Fix Typo 0X0 to 0x0 2022-10-06 13:23:16 +02:00
3d-gussner 1a8f18318c Add Temp Model eeprom documentation 2022-09-28 18:15:23 +02:00
3d-gussner 302e4b679c replace tab with spaces 2022-09-28 17:37:46 +02:00
3d-gussner 37cde856e9 Rename Auto_deplete to Spool_join 
Fix some missing MSG_ c= r=
 2022-09-16 16:25:47 +02:00
D.R.racer 09cb9c6ecd Fixup after rebase + discussion 2022-09-16 10:22:38 +02:00
VintagePC 73c486cc2f - Fix DisableMMU button on FW incompat 
5823c14
- Implement eeprom var, fix reset
 2022-09-16 10:22:38 +02:00
Alex Voinea 340bc87110 Checkpoint: jam detection 2022-09-16 10:20:32 +02:00
Alex Voinea d2bfe422f1 Separate runout and enabled settings 2022-09-16 10:17:04 +02:00