STM32F411: get minimum to compile and upload
SIZES ARM... stm32f411
FLASH : 900 bytes 3%
RAM : 136 bytes 4%
EEPROM : 0 bytes 0%
This commit is contained in:
Nico Tonnhofer
parent
8a4cd52a68
commit
bf0cbb596f
64
Makefile-ARM
64
Makefile-ARM
|
|
@ -40,7 +40,8 @@
|
|||
# #
|
||||
##############################################################################
|
||||
|
||||
MCU ?= lpc1114
|
||||
# MCU ?= lpc1114
|
||||
MCU ?= stm32f411
|
||||
|
||||
# CPU clock rate not defined here, but in the CMSIS headers.
|
||||
|
||||
|
|
@ -70,6 +71,24 @@ TOOLCHAIN = arm-none-eabi-
|
|||
# Not to confuse with the CPU's clock frequency, which is usually much higher.
|
||||
F_CRYSTAL ?= 12000000
|
||||
|
||||
# This is your uploader with any option before your uploadfile $<
|
||||
# and your uploadfile (hex, bin or whatelse)
|
||||
ifeq ($(MCU), lpc1114)
|
||||
UPLOADER ?= lpc21isp -control
|
||||
UPLOAD_FILE = $(PROGRAM).hex
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
UPLOADER ?= st-flash --reset write
|
||||
UPLOAD_FILE = $(BUILDDIR)/$(PROGRAM).bin
|
||||
endif
|
||||
|
||||
ifeq ($(MCU), lpc1114)
|
||||
UPLOADER_FLAGS = $(UPLOADER_PORT)
|
||||
UPLOADER_FLAGS += 115200
|
||||
UPLOADER_FLAGS += $(F_CRYSTAL)
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
UPLOADER_FLAGS = 0x8000000
|
||||
endif
|
||||
|
||||
# Serial port the electronics is connected to.
|
||||
#UPLOADER_PORT ?= /dev/ttyUSB0
|
||||
UPLOADER_PORT ?= /dev/ttyACM0
|
||||
|
|
@ -90,11 +109,12 @@ TARGET = $(PROGRAM).hex
|
|||
# to keep this working and can take a shortcut:
|
||||
SOURCES = $(wildcard *.c)
|
||||
|
||||
ifeq ($(MCU), lpc1114)
|
||||
SOURCES += cmsis-system_lpc11xx.c
|
||||
endif
|
||||
|
||||
# Other target MCU specific adjustments:
|
||||
ifeq ($(MCU), lpc1114)
|
||||
STARTUP_FILE = cmsis-startup_lpc11xx.s
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
STARTUP_FILE = arm-startup_stm32f411xe.s
|
||||
endif
|
||||
|
||||
# Startup definitions. Not target MCU specific.
|
||||
CFLAGS = -D__STARTUP_CLEAR_BSS -D__START=main
|
||||
|
|
@ -102,6 +122,14 @@ ifeq ($(MCU), lpc1114)
|
|||
CFLAGS += -mthumb -mcpu=cortex-m0
|
||||
CFLAGS += -mtune=cortex-m0
|
||||
CFLAGS += -D__ARM_LPC1114__
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
CFLAGS += -mthumb -mcpu=cortex-m4
|
||||
CFLAGS += -mtune=cortex-m4
|
||||
CFLAGS += -D__ARM_STM32F411__
|
||||
CFLAGS += -mfpu=fpv4-sp-d16
|
||||
CFLAGS += -mfloat-abi=hard
|
||||
CFLAGS += -mlittle-endian
|
||||
CFLAGS += -D__FPU_PRESENT=1
|
||||
endif
|
||||
# Other options ...
|
||||
CFLAGS += -Wall
|
||||
|
|
@ -116,6 +144,8 @@ LDFLAGS = --specs=nano.specs
|
|||
LDFLAGS += --specs=nosys.specs
|
||||
ifeq ($(MCU), lpc1114)
|
||||
LDFLAGS += -T cmsis-lpc1114.ld
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
LDFLAGS += -T arm-stm32f411xe.ld
|
||||
endif
|
||||
LDFLAGS += -Wl,--as-needed
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
|
|
@ -130,18 +160,34 @@ LIBS = -lm
|
|||
|
||||
all: $(PROGRAM).hex $(BUILDDIR)/$(PROGRAM).lst $(BUILDDIR)/$(PROGRAM).sym size
|
||||
|
||||
program: $(PROGRAM).hex config.h
|
||||
# TODO: The echo is only for Gen7-ARM LPC1114. The stm flashes don't need this.
|
||||
# This message could confuse someone. Remove this message for stm or write some
|
||||
# friendly text for it.
|
||||
ifeq ($(MCU), lpc1114)
|
||||
define upload_echo
|
||||
@echo
|
||||
@echo "To let the bootloader complete his work, connect now PIO0_1 to GND,"
|
||||
@echo "then press Reset for a moment. The bootloader should begin uploading."
|
||||
@echo "After being done, disconnect PIO0_1 and press reset again. On a"
|
||||
@echo "Gen7-ARM, PIO0_1 is the Step pin of the Z stepper driver."
|
||||
@echo
|
||||
lpc21isp -control $< $(UPLOADER_PORT) 115200 $(F_CRYSTAL)
|
||||
endef
|
||||
else ifeq ($(MCU), stm32f411)
|
||||
define upload_echo
|
||||
@echo
|
||||
@echo "Starting upload..."
|
||||
@echo "This should normally take no time."
|
||||
@echo
|
||||
endef
|
||||
endif
|
||||
|
||||
program: $(UPLOAD_FILE) config.h
|
||||
$(call upload_echo)
|
||||
$(UPLOADER) $< $(UPLOADER_FLAGS)
|
||||
|
||||
$(BUILDDIR)/teacup.elf: $(BUILDDIR)/startup.o
|
||||
|
||||
$(BUILDDIR)/startup.o: cmsis-startup_lpc11xx.s | $(BUILDDIR)
|
||||
$(BUILDDIR)/startup.o: $(STARTUP_FILE) | $(BUILDDIR)
|
||||
@echo " CC $@"
|
||||
@$(CC) -c $(CFLAGS) -o $@ $<
|
||||
|
||||
|
|
@ -157,7 +203,7 @@ define show_size
|
|||
endef
|
||||
|
||||
size: $(BUILDDIR)/$(PROGRAM).elf
|
||||
@echo " SIZES ARM... lpc1114"
|
||||
@echo " SIZES ARM... $(MCU)"
|
||||
$(call show_size,FLASH,text,32)
|
||||
$(call show_size,RAM,data|bss,4)
|
||||
$(call show_size,EEPROM,eeprom,0.0001)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,459 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f411xe.s
|
||||
* @author MCD Application Team
|
||||
* @version V2.3.0
|
||||
* @date 02-March-2015
|
||||
* @brief STM32F411xExx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
//bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
//bl main
|
||||
// Calling the crt0 'cold-start' entry point. There __libc_init_array is called
|
||||
// and when existing hardware_init_hook() and software_init_hook() before
|
||||
// starting main(). software_init_hook() is available and has to be called due
|
||||
// to initializsation when using rtos.
|
||||
bl _start
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word 0 /* Reserved */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word 0 /* Reserved */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
.word SPI5_IRQHandler /* SPI5 */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI4_IRQHandler
|
||||
.thumb_set SPI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI5_IRQHandler
|
||||
.thumb_set SPI5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
|
|
@ -0,0 +1,153 @@
|
|||
/* Linker script to configure memory regions. */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||
RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
|
||||
}
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __end__
|
||||
* end
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
* _estack
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
KEEP(*(.isr_vector))
|
||||
*(.text*)
|
||||
KEEP(*(.init))
|
||||
KEEP(*(.fini))
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
KEEP(*(.eh_frame*))
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
__etext = .;
|
||||
_sidata = .;
|
||||
|
||||
.data : AT (__etext)
|
||||
{
|
||||
__data_start__ = .;
|
||||
_sdata = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP(*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP(*(SORT(.init_array.*)))
|
||||
KEEP(*(.init_array))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
|
||||
. = ALIGN(4);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP(*(SORT(.fini_array.*)))
|
||||
KEEP(*(.fini_array))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(4);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
_edata = .;
|
||||
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bss_start__ = .;
|
||||
_sbss = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
_ebss = .;
|
||||
} > RAM
|
||||
|
||||
.heap (COPY):
|
||||
{
|
||||
__end__ = .;
|
||||
end = __end__;
|
||||
*(.heap*)
|
||||
__HeapLimit = .;
|
||||
} > RAM
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
} > RAM
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_estack = __StackTop;
|
||||
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
}
|
||||
Loading…
Reference in New Issue