e937b052af
Add support for multiple thermistor tables.
...
DEFINE_TEMP_SENSOR takes one additional argument. For TT_THERMISOR you can specify there which thermistor table to use.
2011-04-12 20:00:18 +02:00
1d556e0278
Use HEATER_BED everywhere.
...
For intercom heated bed it may be different from HEATER_bed.
2011-04-11 22:41:50 +02:00
57a75ecbfb
temp: TEMP_RESIDENCY_TIME is in seconds not in temp_ticks (=10ms)
2011-04-04 09:21:32 +10:00
be18eb90b8
Convert TEMP_HYSTERESIS to Celsius.
2011-04-04 09:12:54 +10:00
093d20481e
heater: fix residency compare.
...
labs requires a signed int.
2011-04-04 09:12:54 +10:00
9860d2850f
heater: only reset residency if temp really changed
...
Skeinforge generates sometimes multiple calls to M104/M140, which would add a slow delay on the next M101.
2011-04-04 09:12:53 +10:00
100b7c6c4a
only check intercom every 250ms as we don't send packets more often
2011-03-27 19:34:16 +11:00
0dc7d77885
Massive Doxygen documentation addition
...
'make doc' then point your browser at doc/html/
Needs plenty of cleanup and polishing, but the main bulk is here
even documents your configuration! ;)
2011-03-22 01:34:36 +11:00
8188ff3593
merge intercom-protocol into master
2011-02-21 16:01:27 +11:00
52c2788997
intercom: updating the extruder in 250ms intervals should be fast enough.
2011-02-21 15:52:17 +11:00
eecf3af9f1
analog mask calculated automagically
2011-02-21 13:57:51 +11:00
680b70ad0d
intercom: Send packet only once.
2011-02-14 11:05:53 +11:00
b1a48994dd
preliminary untested implementation of Markus Amsler's new extruder comms protocol
2011-02-12 23:59:19 +11:00
686e417401
Revised thermistor code. Thermistor table now in 14.2 fixed point
...
Two thermistor tables included:
ThermistorTable.h.dist.old, which is the table we used to have, included so those already using it don't have to recalibrate.
ThermistorTable.h.dist, which was generated with 50 entries, and trimmed down in lower temperature ranges where we don't care as much about accuracy and there's less deviation from a straight line anyway.
Corrected default temp sensor entry in config.h.dist to thermistor instead of intercom. (Now matches earlier definitions which by default say we're using a thermistor)
Added noheater sensor example to config.h.dist
Copied CreateTemperatureLook.py from "official" firmware, and modified it for 14.2 fixed point, no negative temperatures (we're using uint16_t's), and PROGMEM.
Since I simply copied the example linear interpolation formula from wikipedia, I'm certian that it could be more efficient. The code that was there wouldn't work with 14.2 table values, and my understanding of it was too shallow to fix it. This works, and upgading the calculations to uint32_t actually takes less code space than leaving them at uint16_t. I assume it's calling a library routine that's already being linked in for the 32-bit math.
2011-02-12 22:22:10 +11:00
e4fc55289b
use constants for conditional compilation since preprocessor can't work out enums and we can't define in macros
2011-02-06 21:34:44 +11:00
d1b2754aba
sorting out preprocessor interactions
2011-02-06 21:11:39 +11:00
97f344f0fa
changes discussed in chat on pull 19
2011-02-06 21:11:39 +11:00
fa91ef8472
fix thermistor lookup table interpolation code
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-02 18:23:10 +11:00
fcaa76d3c0
Simpler definition of temp sensors and heaters.
2011-02-01 19:40:27 +11:00
14809c4a7c
make bed heater define zero-based
2011-01-27 21:03:26 +11:00
80e98e9b22
Added Heated Bed Support
...
Signed-off-by: plasmator <public@plasmatoruniversi.com>
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-01-27 20:31:39 +11:00
096d7dfdf3
Merge release-candidate-triffid branch
2011-01-07 23:09:13 +11:00
3028b297f3
Add simulation code: use "make sim"
2010-10-21 11:05:55 +11:00
3898626534
alter temperature reporting in reprap host compatibility mode
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2010-10-08 21:09:34 +11:00
e78381c56d
Move configuration to config.h.dist
2010-09-27 09:20:07 +10:00
c1dbd869f5
minor fixes: comments, indenting, etc
2010-09-18 08:08:31 +10:00
1a2753ebfb
turn off SPI if not needed, also start analog system
2010-09-16 21:43:13 +10:00
b80c5ea7b5
UNTESTED support for thermistor and AD595
2010-09-13 17:14:12 +10:00
9e21f6c811
move temp_residency back to temp.h
2010-09-12 16:07:28 +10:00
273d63f242
splitting heater stuff out into a separate file
2010-09-12 14:47:49 +10:00
883c488107
fixed some mess from moving stuff around
2010-08-10 14:59:41 +10:00
0b51c1d0ab
Merge branch 'mendel-triffid'
...
Conflicts:
dda.c
gcode.c
machine.h
temp.c
2010-08-10 14:55:06 +10:00
595b66a341
setting up new branch 2
2010-08-10 14:26:24 +10:00
Markus Amsler
Michael Moon
Stephan Walter
John Gilmore (none)
Vik Olliver
plasmator
Casainho