Implemented and tested for both platforms. This is quite a big
commit. Unlike with the previous changes to now choosable PWM
frequencies, all board configuration files and Configtool had
to be changed immediately to deal with the additional parameter
in DEFINE_HEATER() and keep AVR builds working (and regression
tests passing).
Especially at high frequencies the achieved one is only close,
but that's entirely sufficient for our purposes.
Test: the PWM frequency on the scope should be similar to the
one configures in the board file with DEFINE_HEATER().
Currently at a fixed frequency of 1 kHz and with a fixed duty
cycle of 10%, but PWM does work.
As it turns out, PIO0_11 is not usable for PWM, because its timer
is already in use for the Step timer, and had to be disabled for
Gen7-ARM.
Test: define a heater in board.gen7-arm.h and a square signal
of 1 kHz with 10% duty cycle should appear on the heater pin.
These were dropped accidentally, I assume, during the Configtool
template conversion. Without them the INTERCOM feature does not
compile and so board.gen3.h is broken.
Add the gen3 config to testcases and regressiontests to ensure
this does not drop again.
This has to work, else we can't provide default values for new
items.
Now loading a RAMPS board and just saving it results in an
identical file. Very well. Not so for other boards, because
disabled values still get lost.
This #include "../arduino.h" was the only reason prohibiting
Configtool users from storing printer and board configuration
files wherever they wanted. Good reason to remove this restriciton.
This also solves a part of issue #152.
Tooltips don't size their box after line lengths, but have their
own idea on how wide to make it. Accordingly one should display
text with newlines only for paragraph delimiters.
This also required adjustments to all the board and printer
description comments. No functional change there.
This should solve issue #148.
The problem was, applying tooltips to the radio buttons directly
showed no effect on Linux. While this is likely a bug in wxPython,
we can't change this behaviour.
The solution is to also apply these help texts to the surrounding
StaticBox. This works, even for the radio buttons.
This solves issue #149.
This was previously made obsolete in the firmware code already.
See previous commits.
This should solve issue #138.
In case it ever turns out this was a poor decision, it's likely
a good idea to re-add this to the board configuration instead of
the printer configuration.
Debug stuff is meaningful for developers, only. Also often
enabled on a per-file basis depending on the problem at hand.
Two reasons to remove it from Configtool and one reason to
remove it from the config files.
This should solve issue #137.
These are no longer needed, as they're now created on the fly by
Configtool.
Also pick unique information from there over to Configtool, see
the change in configtool/addsensordlg.h.
It was certainly a good idea, but also always a suspect of
malfunctions and as such, almost never used. Newer code
organisation moves most of the code behind it to dda_clock()
anyways, so it also became mostly obsolete.
Rest In Peace, STEP_INTERRUPT_INTERRUPTIBLE, you were matter
of quite a number of interesting discussions and investigations.
Changes for Configtool by jbernardis <jeff.bernardis@gmail.com>
Markus Hitter
Phil Hord
jbernardis
Ruslan Popov