Implemented and tested for both platforms. This is quite a big
commit. Unlike with the previous changes to now choosable PWM
frequencies, all board configuration files and Configtool had
to be changed immediately to deal with the additional parameter
in DEFINE_HEATER() and keep AVR builds working (and regression
tests passing).
Especially at high frequencies the achieved one is only close,
but that's entirely sufficient for our purposes.
Test: the PWM frequency on the scope should be similar to the
one configures in the board file with DEFINE_HEATER().
Currently at a fixed frequency of 1 kHz and with a fixed duty
cycle of 10%, but PWM does work.
As it turns out, PIO0_11 is not usable for PWM, because its timer
is already in use for the Step timer, and had to be disabled for
Gen7-ARM.
Test: define a heater in board.gen7-arm.h and a square signal
of 1 kHz with 10% duty cycle should appear on the heater pin.
Witold Sowa
Markus Hitter