A generic implementation here will allow callers to pass the
target axis in as a parameter so the callers can also be made more
generic.
Traumflug notes:
Split out application of the new implementation in dda.c into its
own commit.
This actually costs 128 bytes, but as we can access axes from within
a loop now, I expect to get more savings elsewhere.
Interestingly, binary size is raised by another 18 bytes if
um_to_steps(int32_t, enum axis_e)
is changed to
um_to_steps(enum axis_e, int32_t)
even on the 8-bit ATmega. While putting the axis number to the
front might be a bit more logical (think of additional parameters,
the axis number position would move), NXP application note
AN10963 states on page 10ff, 16-bit data should be 16-bit aligned
and 32-bit data should be 32-bit aligned for best performance.
Well, so let's do it this way.
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, Markus Hitter, many others #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
62bdbd86d6