Now it waits for an "ok" before sending the next line, like all
the G-code sending hosts do. This allows sending arbitrarily long
G-codes. The 60 seconds simulated time limit is still in place to
avoid endless simulations.
The standard performance simulation now runs more G-code and
results in slightly different numbers accordingly:
cd testcases
./run-in-simulavr.sh short-moves.gcode smooth-curves.gcode triangle-odd.gcode
FLASH : 20540 bytes 144% 67% 33% 16%
RAM : 2188 bytes 214% 107% 54% 27%
EEPROM : 32 bytes 4% 2% 2% 1%
short-moves.gcode statistics:
LED on occurences: 888.
LED on time minimum: 304 clock cycles.
LED on time maximum: 720 clock cycles.
LED on time average: 313.256 clock cycles.
smooth-curves.gcode statistics:
LED on occurences: 36511.
LED on time minimum: 304 clock cycles.
LED on time maximum: 706 clock cycles.
LED on time average: 349.172 clock cycles.
triangle-odd.gcode statistics:
LED on occurences: 1636.
LED on time minimum: 304 clock cycles.
LED on time maximum: 710 clock cycles.
LED on time average: 332.32 clock cycles.
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, many others. #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
6afddf5680