For now this is for the initial rampup calculation, only, notably
for moving the Z axis (which else gets far to few rampup steps on
a typical mendel-like printer).
The used macro was verified with this test code (in mendel.c):
[...]
int main (void) {
init();
uint32_t speed, spm;
char string[128];
for (spm = 2000; spm < 4099000; spm <<= 1) {
for (speed = 11; speed < 65536; speed *= 8) {
sersendf_P(PSTR("spm = %lu speed %lu ==> macro %lu "),
spm, speed, ACCELERATE_RAMP_LEN_SPM(speed, spm));
delay_ms(10);
sprintf(string, "double %f\n",
(double)speed * (double)speed / ((double)7200000 * (double)ACCELERATION / (double)spm));
serial_writestr((uint8_t *)string);
delay_ms(10);
}
}
[...]
Note: to link the test code, this linker flag is required to add
the full printf library (which does print doubles):
LDFLAGS += -Wl,-u,vfprintf -lprintf_flt -lm
##############################################################################
# #
# Teacup - lean and efficient firmware for RepRap printers #
# #
# by Triffid Hunter, Traumflug, jakepoz, Markus Hitter, many others #
# #
##############################################################################
For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation
For documentation, see
http://reprap.org/wiki/Teacup_Firmware
##############################################################################
# #
# This firmware is Copyright (c) ... #
# 2009 - 2010 Michael Moon aka Triffid_Hunter #
# 2010 - 2013 Markus "Traumflug" Hitter <mah@jump-ing.de> #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
# #
##############################################################################
9739382da9