f12683f3ff
Further relax the MBL tight threshold
2024-09-24 10:33:23 +02:00
de092b35d5
PFW-1562 Fix an issue where safety timer is not handled correctly in mFilamentPrompt menu
2024-09-15 10:28:10 +00:00
b614b9c43d
Do not prompt for steel sheet on bed during XYZ calibration
...
Thanks @3d-gussner
2024-09-03 09:28:16 +02:00
b58d2ecccb
Prompt user for Z calibration after failed MBL with yes-no screen
2024-09-03 09:28:15 +02:00
357b68cf76
Ask for steel sheet on bed during Z calibration
2024-09-03 09:28:15 +02:00
8196e48684
Reduce number of Z realignments before Z calibration is requested
2024-09-03 09:28:15 +02:00
d8e3c2b481
Relax 3x3 MBL threshold
2024-09-03 09:28:15 +02:00
923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling
...
Remove legacy Auto Bed Leveling code
2024-08-30 10:44:50 +02:00
c1360d7bfb
Fix LCD output
...
Configuration->HW Setup->Checks showed `a`
MSG_FILAMENT `Filament` can only be 8 chars long and only ES and IT had `Filemanto` as translation.
But as ES the `o` in `Filamento` was overwritten by `[Estricto]` I removed the MSG_FILAMENT to be translated.
Saves few bytes.
2024-08-26 09:20:05 +02:00
2b1c49dae2
Remove legacy Auto Bed Leveling code
...
The goal is to clean up the project
2024-08-24 07:11:38 +00:00
40d3830e6d
Simplify filament_presence_check usage
...
Pull all checks needed into the function such that the caller
only needs to check the return value
Also added description for the filament_presence_check function
2024-08-24 07:10:23 +00:00
bf72ecc3f9
Add filament presence check at start of print
...
A new menu setting is added to configure how strict the check should be.
- None: No check is performed
- Warning (default): The user is warned about missing and is prompted to continue with Yes/No. If No is selected, the print is aborted. If no user input is given (e.g. from host printing) then the warning will expire in 30 seconds and assume the Yes option was selected
- Strict: If the filament is not detected when a print is started, it is immediately canceled.
The check is currently performed on G-codes: M24 and M75. Starting a SD print and Host print respectively.
2024-08-24 07:10:23 +00:00
a2022471ce
Send host actions on filament runout
2024-08-23 10:44:38 +02:00
815b68678d
M600 - Show filament name at the Insert filament prompt
2024-08-21 20:56:13 +03:00
80f27618c9
Marlin: drop lcd.h include
...
Only include it where needed
2024-08-13 23:40:18 +00:00
efc4cc4996
Remove unused enum MeshLevelingState
2024-08-03 16:48:08 +00:00
ff16bfd8fa
Merge pull request #4739 from gudnimg/prune-disabled-code
...
Remove a bit of unused code which is disabled at compile time
2024-08-03 10:34:40 +00:00
04a7175cc7
Remove LARGE_FLASH preprocessor symbol
...
It's not very useful as is ... probably remnant from Marlin 1
2024-07-31 12:06:35 +00:00
eb7969441a
Remove Servo..h/cpp
2024-07-31 10:31:05 +00:00
2cbbdbacd5
Remove a bit of unused code which is disabled at compile time
...
Some of these have been used > 6 years and don't compile anymore.
Reason to want this removed is just to reduce the code we maintain
2024-07-31 09:53:45 +00:00
bb1bb4d717
Remove commented variable load_filament_time
2024-07-28 17:41:23 +00:00
5efae44eb7
Delay Z-Axis on Autoload
...
Delay z-axis movement when the operators hand is close to the printhead.
2024-07-05 16:12:07 +02:00
bc48d34a2f
Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION
2024-07-04 10:12:38 +02:00
45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
e110153ee2
Cleanup doxgen documentation and white spaces
2024-05-20 18:35:09 +02:00
08d26fdee2
Replace hard coded crash z lift value with Z lift value.
...
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
2024-05-02 11:37:13 +02:00
28502a2b6e
optimisation: remove 1 more call to __divsf3
...
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)
Replaces the call to __divsf3 with __mulsf3 which is better
No change in memory
2024-04-23 09:18:45 +02:00
2c46e1b344
optimisation: remove 3 calls to __divsf3
...
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2024-04-23 09:18:45 +02:00
51b119a3ec
Fix Autoreport broken in 3957dc91aa
2024-04-15 12:09:43 +02:00
e5d504b855
Add Extrude mintemp save and restore during power panic
...
Thanks to @wavexx in #3008
2024-04-09 09:34:24 +02:00
02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup
...
Remove redundant ` cancel_heatup` assignment
2024-04-09 08:17:09 +02:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a93cd93756
Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h`
...
Update pot and po files
2024-04-04 08:58:46 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913
...
Enable M913
2024-04-04 07:30:06 +02:00
5f26d5f7da
Fix MK2.5 builds
...
- removed `reset_uvlo` as `#ifdef UVLO_SUPPORT` everywhere for MK2.5 is a huge change.
2024-03-27 09:42:59 +01:00
1ac69247d7
Fix and improve PowerPanic
...
- No wait for heatup during host print recovery
- No extra Z lift when power panic happens during paused print
- added an extra EEPROM value
- fixed `EEPROM_LAST_ITEM`
- changed EEPROM version to 3.14.0
- Added `reset_uvlo` function
2024-03-27 09:09:55 +01:00
2df8a18fde
Fix MK2.5/S builds
2024-03-15 12:47:18 +01:00
82d102d740
Enable M913
2024-03-15 12:47:18 +01:00
a04063f966
Fix DEBUG_UVLO_AUTOMATIC_RECOVER
2024-03-13 17:43:00 +01:00
e2823c3c35
Reset EEPROM_UVLO after recovering
...
Undo PP Z lift
2024-03-13 17:43:00 +01:00
9e52b78285
Add ubs_timer.start to PRUSA uvlo
...
Cleanup format
2024-03-13 17:43:00 +01:00
15ea2784c3
Fix another saved_printing_type issue
2024-03-13 17:43:00 +01:00
112d3c672c
Update debug_printer_states
2024-03-13 17:43:00 +01:00
886d610524
Cancle power recovery correctly using cancel_saved_printing();
2024-03-13 17:43:00 +01:00
95c6ea5889
Fix to correct EEPROM address
2024-03-13 17:42:59 +01:00
47235bbf62
Power panic recover lift by 20 Z_PAUSE_LIFT only once
...
by setting PENDING_RECOVERY_RETRY
Also the default saved_printing_type after a reboot is now PRINT_TYPE_NONE
2024-03-13 17:42:59 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
Alex Voinea
gudnimg
3d-gussner
sarusani
Panayiotis-git
sarusani