2533c36496
Add Calibration LCD menu item for optionallly disabling XY skew correction.
...
XY Skew correction menu item only enabled only when skew is 'perfect' (< 0.1deg).
Fix HOME-Z to correct location (calibration point)
2018-02-13 11:48:47 -05:00
fa7f306726
Experimental ISR structure (thread prioritizing)
...
Remove need to call CheckRx
2018-02-04 12:57:26 -05:00
305d9d8dad
Try to minimize auto screen clear/redraws
...
Re-enable M851 to use for adjusting Live-Z offset
2018-01-31 16:51:23 -05:00
bbf13db82a
Backports from MK3
...
- Remove attempted recovery from RX buffer full (just drop chars)
- Use CRITICAL_SECTION in LCD menu sync
- Remove M851 command and zprobe_zoffset (Use live-Z instead)
2018-01-21 14:21:05 -05:00
05a31ff2da
ultralcd: eliminate display flicker in pid_extruder
2018-01-04 17:13:03 -05:00
ce36964279
Set command type before parsing line. Skip leading whitespace.
2018-01-01 15:55:06 -05:00
b381e51a13
Add option to disable skew correction if XY calibration error is near perfect
2017-12-29 15:47:44 -05:00
ab16ff24f0
Fix kill() routine to display full-screen message correctly, working on Travis deploy
2017-12-23 19:33:31 -05:00
c870a5be49
Corrected release URL. Travis release setup
2017-12-20 19:27:19 -05:00
6c3e391579
Cleanup and create release structure for Travis
2017-12-20 12:16:09 -05:00
6579fe51ad
Allow BAUDRATE override by build opts
2017-12-11 12:48:36 -05:00
38b65a85df
Add local variant configuration version
2017-12-09 18:09:22 -05:00
ad6b53892e
Remove unecessary source files [qr_solve, vector_3].
...
Use SDK version of LiquidCrystal (faster draw)
Put serial init before lcd init
Filament Load: 15mm extra instead of 25mm
2017-12-09 16:54:21 -05:00
e19492a30e
Remove redundant splash screen re-init
2017-11-24 15:17:49 -05:00
ae9f975e07
Fix M110 compatibility (again).
...
Add 25mm to manual filament load extrusion
2017-11-22 17:19:34 -05:00
c9db6ac451
Code cleanup and force-inline removal testing
2017-11-15 09:00:02 -05:00
ad0f7ff33b
Use planner buffer for EEPROM save/restore.
...
Reset printer after restore.
2017-11-15 08:59:13 -05:00
095864aae3
Merge branch 'MK2' of https://github.com/prusa3d/Prusa-Firmware into private-build2
2017-11-13 14:21:49 -05:00
4c5f9c8bf1
first layer cal. gcode corrections
2017-11-12 10:48:14 +01:00
19a952137d
gcode correction in first layer calibration
2017-11-12 09:40:26 +01:00
377bd879a7
Merge branch 'MK2' of https://github.com/prusa3d/Prusa-Firmware into private-build2
2017-11-10 13:17:44 -05:00
1047854afa
version change
2017-11-10 18:39:16 +01:00
18c107ba77
listing filenames reverted to short filenames, because of compatibility; massge shown during first layer cal. has all language variations now, not possible to pause print when print is paused
2017-11-10 15:42:57 +01:00
0745a2164b
Merge branch 'MK2' of https://github.com/prusa3d/Prusa-Firmware into private-build2
2017-11-09 11:24:34 -05:00
417dff8574
removed redundant code
2017-11-09 16:14:14 +01:00
858bd7f9ac
another changes in languages
2017-11-09 15:22:20 +01:00
03fdb06e89
initial
2017-11-09 15:14:31 +01:00
2c80f1f3ad
Merge branch 'liquidcrystal-update' into private-build2
2017-11-07 17:16:04 -05:00
8b5f36c55e
Upgrade LiquidCrystal driver to recent version and add Prusa custom mods.
2017-11-07 17:11:23 -05:00
69339761b2
Identify custom builds with Author info
2017-11-07 16:31:36 -05:00
0e5d3d93db
Merge branch 'remove-extra-warnings' updates into private-build2
2017-11-07 14:25:15 -05:00
dc391e3fc2
Remove 'unused-parameter' and 'empty-body' warinings
...
Additional warnings cleanup for SNMM config.
Fix uninitialized 'SilentMode' refrences in stepper
2017-11-07 14:17:48 -05:00
9868fcd8fc
Merge remote-tracking branch 'upstream' into private-build2
2017-11-06 09:25:10 -05:00
652749b0a4
Lanuage files sync'd
2017-11-06 09:17:41 -05:00
b5e42e2934
PL updated
2017-11-06 12:01:17 +01:00
f2d9c00103
Merge pull request #260 from PavelSindler/presort_after_print
...
presort files when print is finished
2017-11-03 16:18:47 +01:00
6a253b60fb
Merge pull request #264 from PavelSindler/language_corrections
...
PID safety check and Language corrections
2017-11-03 16:18:35 +01:00
6728e425cc
whitespace correction
2017-11-03 16:13:01 +01:00
4114a7844d
pl and it corrections
2017-11-03 16:00:44 +01:00
6bdab7bf48
filecheck fix: we need to check buffered gcodes after finding end of gcode file
2017-11-02 18:40:22 +01:00
6689cca59c
languages partly corrected, PID cal. is checking for thermal runaway
2017-11-02 17:29:16 +01:00
6c8f304809
dont flush presort at the beginning of the print
2017-11-01 14:18:39 +01:00
3ec227c02e
presort files when print is finished
2017-10-31 19:54:42 +01:00
f4103bc386
Use dynamic linebfr
2017-10-31 13:48:50 -04:00
2dfb5666b9
Single language support (See langtool.pl)
2017-10-31 13:48:50 -04:00
3284cfaced
Clarify PID cal menu items. Name the Wizard
2017-10-31 13:48:50 -04:00
7a52f00f46
Local updates/merges
2017-10-31 13:48:50 -04:00
ab8610ecff
Add optional 8-point Mesh Bed Correction offsets + LCD and translations support
...
MBC offsets limited to +/- 500um (stored as int16 in EEPROM)
2017-10-31 13:48:50 -04:00
7bd9655fd4
Remove 'unused-parameter' and 'empty-body' warinings
2017-10-31 13:48:50 -04:00
5cea6aee37
ifdef changed to ifndef in config files
2017-10-30 10:13:23 +01:00
Ted Hess
PavelSindler
PavelSindler