3767dd299a
Merge pull request #3929 from leptun/MK3_disable_M47
2023-01-18 09:31:22 +02:00
0c352ac2d1
Disable M47 if TMC2130 drivers are used
...
flash: -126B
RAM: 0B
2023-01-17 20:37:27 +01:00
d83c0f6c40
Fix an issue with indexing PROGMEM pointer
...
Using array index 'pointer[index]' doesn't work properly.
Instead using "pointer + index" works fine.
No change in memory footprint
2023-01-16 12:36:57 +01:00
9416310f7e
optimisation: move row_offsets into PROGMEM
...
Change in memory:
Flash: -42 bytes
SRAM: -4 bytes
2023-01-16 12:36:57 +01:00
eeb5f3d50c
optimisation: refactor menu_draw_P()
...
Add a way to only change the LCD column
Change in memory:
Flash: -90 bytes
SRAM: 0 bytes
2023-01-16 12:36:57 +01:00
730bb3708e
Fix an issue with menu_draw_item_puts_P
...
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2023-01-16 12:36:57 +01:00
4f4153175c
Refactor menu_draw_toggle_puts_P
...
The refactoring drops the local buffer lineStr
Change in memory:
Flash: -106 bytes
SRAM: 0 bytes
2023-01-16 12:36:57 +01:00
cc08b938b7
Optimisations: implement lcd_print_pad_P()
...
Used lcd_print_pad_P is some obvious places. We can probably use
this function in more places to further save flash memory
Change in memory:
Flash: -268 bytes
SRAM: 0 bytes
2023-01-16 12:36:57 +01:00
472f84e46a
Avoid FullScreenMsg "Eject/Cut Filament" when called inside a toolchange
...
CutFilament and EjectFilament got a flag: enable/disable FullScreenMsg
2023-01-16 09:25:04 +01:00
48ce22d41f
Fix blank LCD while err. Load to Extr. Failed
...
Because this error is not an MMU error but a printer one, the existing infrastructure has been bent to support such a scenario.
During testing it turned out, that some machines fail to draw the error screen due to previous internal states.
This PR resets the internal states so that the conditions for drawing the error screen are met.
2023-01-16 09:25:04 +01:00
4f177f0b38
TM: Fan measuring state reset unification
...
Add resetFanCheck() to reset the fan measuring state as it's needed in
several places and save some flash space.
2023-01-16 08:43:36 +01:00
7529652dca
TM: Restore extruder autofan state when stopping/resuming
...
During thermal errors all fans are set to full speed.
When the print is resumed or stopped *and* the thermal error is gone,
also restore the autofan state.
Fixes #3893
2023-01-16 08:43:36 +01:00
204df90d6d
TM: Set the cal status bit when running `M310 A` directly
...
Running `M310 A` should set the TM calibration bit status if the
autotune procedure was successful.
Partially addresses #3891 and #3890 , since running `M310 A F0` should
*still* count as valid calibration data and is not something that can be
replicated by using the LCD (which enforces self-test).
2023-01-16 07:32:57 +01:00
12f5bd3648
wizard: Do not complain about missing calibration if model is disabled
...
This fixes #3891 without having to set the calibration bit, meaning
that if the model is later re-enabled without a real calibration, a
prompt is shown as expected.
2023-01-16 07:31:33 +01:00
2d34535977
Move Z to top during Nozzle change
2023-01-16 07:27:53 +01:00
58bed7e388
MMU: Make sound after the hotend reaches temp, not while waiting
2023-01-16 07:19:11 +01:00
5582114628
optimisation: re-use delay_keep_alive() in a few places
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2023-01-15 19:21:55 +01:00
d3aa40a575
Fix blank LCD issue
2023-01-14 13:51:10 +01:00
76d1f28c14
optimisation: serialecho_temperatures should print a constant extruder number
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-01-14 11:22:03 +00:00
62fc19b361
optimisation: combine a few serial logs since extruder is now constant
2023-01-14 11:22:03 +00:00
858e80e806
optimisation: M109 doesn't have a T parameter.
...
In 8-bit firmware the tool is always 0.
Change in memory:
Flash: -146 bytes
SRAM: 0 bytes
2023-01-14 11:22:03 +00:00
ff49c6a0bf
optimisation: M104 doesn't have a T parameter
...
Change in memory:
Flash: -120 bytes
SRAM: 0 bytes
2023-01-14 11:22:03 +00:00
44660f668a
optimisation: M105 doesn't have a T parameter
...
Remove parameter from gcode_M105() extruder is always 0.
Change in memory:
Flash: -64 bytes
SRAM: 0 bytes
2023-01-14 11:22:03 +00:00
11f56bf900
Fix building multilang firmware on Windows
2023-01-14 09:20:55 +00:00
fa0a522b7d
optimisation: re-use serialecho_temperatures()
...
Change in memory:
Flash: -82 bytes
SRAM: 0 bytes
2023-01-10 07:22:35 +01:00
f1cd388370
Shorter code
2023-01-06 19:33:32 +01:00
8c79bab503
optimisation: there is only one extruder when planning a line
...
Change in memory:
Flash: -50 bytes
SRAM: -3 bytes
2023-01-06 19:33:32 +01:00
534c2e2664
Cleanup: Remove M218
...
It was only enabled when multiple extruders are enabled
The firmware doesn't support it
and even if the M218 gcode could be used, the code does not compile
2023-01-06 19:30:05 +01:00
0482cca212
Merge pull request #3883 from wavexx/readme_build_type
...
README: Set the build type in instructions
2023-01-04 13:30:51 +01:00
78d5d18426
README: Set the build type in instructions
...
Instruct to build in Release mode by default.
2023-01-04 12:50:46 +01:00
96a7383f19
Merge pull request #3869 from wavexx/m300_s0
...
Make M300 S0 pause like Marlin
2023-01-02 19:23:58 +01:00
4b9c11624b
Merge pull request #3877 from 3d-gussner/MK3_Update_Cal_documention
...
MK3: Update calibration status v2 documentation
2023-01-02 15:42:46 +01:00
ba3ee0b4c6
Fix few values
2023-01-02 15:11:01 +01:00
20634a3852
Update calibration status v2 documentation
2023-01-02 15:11:01 +01:00
3d9dd08c16
Change MMU error links to a new url
...
PFW-1473
2023-01-02 12:43:08 +01:00
7a6d588d97
TM: Mark more internal functions as static
2023-01-02 10:52:07 +01:00
50209815ea
TM: Also clear the status flags when disabling the model
...
Disabling the model during a warn/error condition will also stop
updating the warning/error flag, keeping the printer in an error state.
Clear all flags as well when changing model settings.
2023-01-02 10:52:07 +01:00
543b333007
Remove extra delay after critical sound
...
This delay doesn't exist for the tone generator, so remove it from the
pure version as well.
2022-12-31 01:13:45 +01:00
e45adb4cee
Make M300 S0 pause like Marlin
...
Follow Marlin's behavior and simply insert a delay for the requested
duration when using M300 S0.
When S is not specified, use the default tone instead.
Fixes #3856
2022-12-31 01:13:45 +01:00
9cbf0a28cc
Fix an issue on multilang builds where first two charactes are not rendered ( #3781 )
2022-12-30 15:18:48 +01:00
85d27e6e5e
Address 3 different start scenarios 1st lay cal + MMU
...
This PR tries to address the 3 different startup scenarios for 1st layer calibration with the MMU:
- 1st lay cal started with correct filament already loaded in the nozzle - we should continue, but skip the first 58mm (first 2 g-codes in the hard coded sequence) of purge line extrusion
- 1st lay cal started with other filament already loaded in the nozzle - we should unload and then issue a toolchange with no extra unload
- 1st lay cal started without loaded filament - we should just do a toolchange with no extra unload
PFW-1457
2022-12-30 15:04:45 +01:00
52a3beb931
Cut & Eject: avoid preheat if no filament loaded
...
and add fullscreen messages for Cut & Eject (messages intentionally reused to save space)
2022-12-30 14:23:44 +01:00
43f3865d7c
Tune UI CutFilament & EjectFilament
2022-12-30 14:23:44 +01:00
ec1d12d929
Introduce FILAMENT_EJECTED + tune Eject operation + inc. MMU ver. 2.1.6
2022-12-30 14:23:44 +01:00
58ff0efb30
Silence nodiscard attribute at one spot
...
... where it is really irrelevant
2022-12-30 14:23:44 +01:00
ce7ab1d73c
Fixup: build MK25/MK3 (non-S)
2022-12-30 14:23:44 +01:00
ebbf2378ed
Update MMU error texts
...
as per https://github.com/prusa3d/Prusa-Error-Codes/pull/71
2022-12-30 14:23:44 +01:00
5e103cc24e
Fixup: restoring temp. while Load2ExtrFailed
2022-12-30 14:23:44 +01:00
d4f0f363cd
Fixes from tests
...
- introduce Cut Filament
- limit retries try-unload
- fix waiting in "Load to extruder failed" error screen
- add LOAD_TO_EXTRUDER_FAILED error definition
2022-12-30 14:23:44 +01:00
a30ea1c5ab
Rename error: Load to Extruder Failed
...
as per request from the Content team
2022-12-30 14:23:44 +01:00
Alex Voinea
Guðni Már Gilbert
D.R.racer
Yuri D'Elia
3d-gussner
Yuri D'Elia