211e5f5f37
Define DBG output
2021-01-11 17:31:26 +01:00
904a23b69e
Report calibration results
2021-01-11 17:02:41 +01:00
2e40a27460
Alignment, comments
2021-01-11 15:40:12 +01:00
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating
...
Raise Z while preheating when auto/[un]loading the filament
2021-01-11 07:45:54 +01:00
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines
...
Remove an unused define
2021-01-11 07:43:44 +01:00
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu
...
Disable filament checks inside the Move -> Extruder menu
2021-01-11 07:42:25 +01:00
a064ce4722
Add gcode `M123` Tachometer value
2021-01-10 15:15:44 +01:00
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip
...
Show the FlashAir IP address
2021-01-08 12:20:12 +01:00
584177e8fd
Fix E mask
2021-01-08 10:24:36 +01:00
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3
...
Merge 3.9.3 back into MK3
2021-01-08 10:20:40 +01:00
3329d34ce4
Fix doxygen issue with "^" and "|" only in one line
...
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
2021-01-08 09:40:13 +01:00
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3
2021-01-07 13:27:51 +01:00
603d704178
Version changed (3.9.3 build 3556)
2021-01-07 12:50:58 +01:00
2981b9e9c5
OctoPrint needs new lines
2021-01-04 14:59:12 +01:00
cc9e7b9376
Fix comments, remove unused
2021-01-04 13:01:06 +01:00
49d57ed621
Median dynamic circle
2020-12-30 17:02:31 +01:00
a9fd09ca3f
Implement median
2020-12-30 15:15:17 +01:00
13fefaa1bf
Fix typo
2020-12-30 15:01:32 +01:00
03b87ae68b
Add 8 pixel circle pattern
2020-12-30 13:08:47 +01:00
c14e725574
Fix moves
2020-12-29 18:27:33 +01:00
c2ab8785f4
Revert Manhattan
2020-12-29 17:31:34 +01:00
c1e6567461
Fix step axis coding
2020-12-29 17:17:32 +01:00
922769cefb
axis -> axes
2020-12-29 17:14:18 +01:00
a01dfe26fe
Add Manhattan movement
2020-12-29 17:13:11 +01:00
6461206e08
Fix direction setting
2020-12-29 14:19:05 +01:00
b6e78bf900
Fix direction
2020-12-29 14:08:30 +01:00
c11e8654da
Revert both directions, refactor code
2020-12-29 12:39:35 +01:00
e86ba5e26d
Scan only once
2020-12-28 16:45:39 +01:00
7e02a7f118
Version changed (3.9.3-RC1 build 3555)
2020-12-26 15:45:34 +01:00
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2
...
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
2020-12-25 18:22:04 +01:00
80e32ce1a5
Turn off speed optimization due to MK2.5
2020-12-25 15:27:42 +01:00
12f4102272
Group PINDA defines
2020-12-23 21:00:02 +01:00
76eb743139
Set default SuperPINDA toggle on MK2.5/S to NO
2020-12-23 20:59:33 +01:00
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
a97587f373
Changed PINDA_MINTEMP having own value
...
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
2020-12-23 20:58:44 +01:00
732b6e0cad
Cleanup
2020-12-23 20:58:20 +01:00
62c36f718b
Add SuperPINDA support for MK2.5/S
...
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
- If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
- If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
- If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-23 20:56:50 +01:00
e6eb3be247
Set jerk = 1, accel. = 1000
2020-12-23 16:56:04 +01:00
979525f028
Add more restarts
2020-12-22 19:34:12 +01:00
25d138d198
Revert max.speed
2020-12-22 15:10:01 +01:00
e24a763e46
Cleanup
2020-12-22 14:45:55 +01:00
8df2eccf45
Remove defines and unused vars
2020-12-22 14:36:37 +01:00
25d6e24778
Add comments
2020-12-22 14:16:20 +01:00
90c8045f7d
Clean the code
2020-12-22 13:59:50 +01:00
20659ec818
Add debug output
2020-12-22 12:51:22 +01:00
c397e9249a
Restart scanning
2020-12-21 19:33:36 +01:00
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
744763f0a9
Fix diagonal movement
2020-12-21 17:34:54 +01:00
de23a845b4
Remove unused
2020-12-21 15:53:51 +01:00
3c9168f8f6
Optimize diagonal
2020-12-21 15:52:25 +01:00
9a59369c77
Diagonal acceleration
2020-12-21 15:32:09 +01:00
27ff6b0057
Fix build
2020-12-21 13:11:48 +01:00
9b55ff9de1
Acceleration up and down
2020-12-21 13:05:26 +01:00
f39a0999e1
Prepare full acceleration control
2020-12-18 21:33:43 +01:00
ccf26e4e7a
Basic acceleration
2020-12-18 20:04:00 +01:00
a8f4207df9
New XYZ calibration algorithm
2020-12-17 18:19:36 +01:00
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches
2020-11-30 09:14:58 +02:00
61c48df0bd
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-11-23 15:53:03 +09:00
f96f75bd17
Fix warning and a bit of indentation
...
Saved 64B of flash and 1B of SRAM
2020-11-16 10:58:26 +02:00
f3953d7c83
Merge branch 'MK3' into MK3_random_patches
2020-11-16 09:11:12 +02:00
c0070506fb
Merge branch 'MK3' into flashair_display_ip
2020-11-13 22:28:22 +09:00
d013abfd52
Merge pull request #2890 from prusa3d/MK3_3.9.2
...
Merge MK3_3.9.2 into MK3
2020-11-13 13:03:35 +01:00
807eddafb0
Remove debugging code
2020-11-13 12:12:18 +02:00
43ace00a24
Fill the progress bar at the end and code optimizations
2020-11-12 18:43:48 +02:00
5ad125cbed
Merge branch 'MK3' into MK3_filecheck_progress_bar
2020-11-12 15:53:33 +02:00
396ee0fde2
Version changed (3.9.2 build 3524)
2020-11-10 10:27:18 +01:00
176e2674b9
Fix M105 ok hack
2020-11-09 21:49:56 +02:00
023ccb0e89
Fix double ok in M603
2020-11-09 21:49:56 +02:00
0c305ee5f5
Fix warning
2020-11-09 21:49:56 +02:00
4abf1f436a
Gracefully dump the queue + fixes to fancheck
2020-11-09 21:49:56 +02:00
fdbbc7d62a
Terminate last line from the SD card even if it doesn't have a \n
2020-11-09 21:49:56 +02:00
ff56ece6f8
Remove redundant get_command prototype
2020-11-09 21:49:56 +02:00
5f0e4a1cac
Temporary M602 patch. Needs more work
2020-11-09 21:49:56 +02:00
6873a9d28e
Only send capabilities when M115 is run without arguments
2020-11-09 21:49:56 +02:00
0ee8e1f424
Fix missing ok in M601
2020-11-09 21:49:56 +02:00
e5ebf7c67f
Fix missing keep-alive messages
2020-11-09 21:49:56 +02:00
26f62f042e
Use the longest filename instead of just using the long filename in M27
2020-11-09 21:49:56 +02:00
4747c8c9f5
Increase top Z-offset limit based on some test results
2020-11-09 12:29:19 +01:00
5184910ef9
Try harder finding the calibration center
...
with alternative PINDAs it looks like their properties vary a lot
and searching for the calibration center requires trying different
Z levels.
2020-11-09 06:33:41 +01:00
cd4e16ef9f
XYZ calibration tune
...
PFW-1159
2020-11-06 08:25:56 +01:00
e28159122f
Make MIN_Z_FOR_LOAD/UNLOAD the same
...
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.
With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
2020-10-29 15:30:16 +01:00
5f23474c95
Raise Z while preheating when auto/[un]loading the filament
...
Preheating already raised Z to avoid scorching the PEI sheet, as does
filament loading/unloading to allow for excess material to be removed.
However, when loading/autoloading/unloading via the LCD with a cold
nozzle the preheating menu is performed before the carriage is raised,
leaving the carriage close to the sheet while heating the nozzle.
Pre-raise the carriage already while waiting, so that the subsequent
move is automagically skipped.
Set bFilamentWaitingFlag only once to perform both the LCD
initialization and raising to the appropriate height.
Should fix #2761
2020-10-28 20:49:28 +01:00
c05d4c9112
Update messages.h
...
cleanup space
2020-10-21 17:04:20 +02:00
a84d7ef8d6
corectino of declaration
2020-10-13 16:56:57 +02:00
c8c7563e8a
LCD status changed
...
When the lcd status changed it will be printed "LCD status changed" to serial line.
2020-10-07 17:44:17 +02:00
ebc987bd23
Merge branch 'MK3' into flashair_display_ip
2020-09-28 21:19:44 +09:00
134f841380
Merge pull request #2841 from leptun/MK3_SD_REMOVED_MESSAGE
...
SD card released message
2020-09-23 10:22:04 +02:00
95e2e2f69c
Merge pull request #2832 from leptun/MK3_AUTO_REPORT_TEMPERATURES
...
Mk3 auto report temperatures
2020-09-23 08:51:26 +02:00
ef0840f587
Merge pull request #2786 from leptun/MK3_M115_Capabilities_report
...
Printer Capabilities framework + Macros + Code cleanup
2020-09-23 08:37:03 +02:00
d9fa44c142
Document M155 command
2020-09-23 09:14:35 +03:00
e24466f22e
Merge pull request #2837 from prusa3d/MK3_3.9.1
...
Merge MK3_3.9.1 into MK3
2020-09-22 10:43:59 +02:00
4c7100985e
Merge branch 'MK3_3.9.1' into flashair_display_ip
2020-09-22 11:59:05 +09:00
7278458316
Version changed (3.9.1 build 3518)
2020-09-18 16:59:22 +02:00
bd7bb5acb3
Update new messages and their translations ( #2835 )
...
* Add missing translations
* Add missing CZ and IT translations
* Update CZ, FR, IT, ES translations
CZ thanks to @DRracer
FR thanks to Carlin Dcustom
ES tried myself
IT thanks to @wavexx
Only missing is PL
* Improve wording +change keys
* Add missing PL translations
* Fix copy paste error in Italian
fix double translations
* Make PL translation shorter
* Fix some length issues and capital letters
* Fixed again translations length issues
updated po files
* Update FR translation - thanks @awenelo
* Fix execution of lang-check.py
- Make lang-check.py executable
- Execute directly instead of specifying the python interpreter manually
("python" is no longer available on Debian, and would default to
version 2 prior to that despite being written for python 3)
* Fix permissions of translation files
Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: Yuri D'Elia <wavexx@thregr.org>
2020-09-18 16:50:25 +02:00
2f5083daa7
quickfix to mistake made in the experimental menu visibility code
...
Fix indentation
2020-09-15 18:56:39 +03:00
9fb6efc435
Add newline at the end of file
2020-09-15 14:56:41 +02:00
c0fced2f3c
Fix typo
2020-09-15 14:21:21 +03:00
e2ef5af40e
Add capability line
2020-09-15 14:21:09 +03:00
a1dfbffedb
Merge branch 'MK3_M115_Capabilities_report' into MK3_AUTO_REPORT_TEMPERATURES
2020-09-15 13:39:00 +03:00
073eadff7e
Merge branch 'MK3' into MK3_AUTO_REPORT_TEMPERATURES
2020-09-15 13:38:47 +03:00
espr14
DRracer
3d-gussner
D.R.racer
Alex Voinea
odaki
Yuri D'Elia
MartinPoupa