43f3865d7c
Tune UI CutFilament & EjectFilament
2022-12-30 14:23:44 +01:00
58ff0efb30
Silence nodiscard attribute at one spot
...
... where it is really irrelevant
2022-12-30 14:23:44 +01:00
5e103cc24e
Fixup: restoring temp. while Load2ExtrFailed
2022-12-30 14:23:44 +01:00
d4f0f363cd
Fixes from tests
...
- introduce Cut Filament
- limit retries try-unload
- fix waiting in "Load to extruder failed" error screen
- add LOAD_TO_EXTRUDER_FAILED error definition
2022-12-30 14:23:44 +01:00
a30ea1c5ab
Rename error: Load to Extruder Failed
...
as per request from the Content team
2022-12-30 14:23:44 +01:00
0a3517e8b2
Show an error screen when try-unload fails to push filament into nozzle
...
This is a prototype implementation of having the ability to show an MMU error screen even for printer's errors (during an MMU operation).
Also, the retry count of unloads after failed load the extruder tube is now limited to ~3 attempts.
Technically, since this very error is not an MMU's one (MMU is just fine at this stage) but a printer's one I tried to hack the existing error-reporting infrastructure to handle such a case.
The original idea of this approach was suggested by @vintagePC
2022-12-30 14:23:44 +01:00
b2b7990cfc
Allow tweaking try-unload feedrates
...
It looks like MMU2_VERIFY_LOAD_TO_NOZZLE_FEED_RATE can get much higher that the original 20mm/s.
50mm/s is the default now, can be tweaked further.
2022-12-30 14:23:44 +01:00
62ea78d46e
Handle configurable distance past gears
2022-12-19 23:49:12 +01:00
70356b71df
Handle filament sensor position that is not 0
2022-12-19 23:41:43 +01:00
c72ae8a2f3
PFW-1439 Remove parameters from execute_load_to_nozzle_sequence
2022-12-19 21:12:12 +00:00
6ee5f08505
PFW-1439 Compensate load to nozzle extruder sequence for Extra Loading Distance
...
The Extra Loading Distance is configurable by the user.
We need to compensate the hardcoded sequence
such that it does not extrude too much or
too little. Currently the firmware
extrudes too little.
2022-12-19 21:12:11 +00:00
97ddcc66bb
Merge pull request #3839 from leptun/MMU2_split_variant_config
...
MMU2 split variant config
2022-12-19 20:31:01 +01:00
ba0f051f72
Revert accidental removal of check
2022-12-18 15:55:48 +01:00
4c32e8b403
PFW-1457 make CHECK_FSENSOR into a function
2022-12-18 12:23:20 +00:00
8623d9ff55
Split the mmu2 config into MMU2 and MMU2S
2022-12-18 09:58:20 +01:00
fee68b0f0d
PFW-1457 Do not unload at start of First Layer Cal
...
Fixes issue where First Layer Cal. triggers an unload before any
filament is loaded
The purpose of this if() statement is to handle the case where
a user or developer is sending T-codes to the printer directly
via Serial. Such as when one first sends T0 and then T4.
And unload must be triggered in-between, we can do this automatically
if FINDA detect filament.
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2022-12-18 05:51:21 +00:00
c8157919b1
PFW-1440 Fix issue where cooldown timer is not set after a faile retry
2022-11-21 12:54:53 +01:00
37ac33bc32
Fix compiler warning
2022-11-21 12:54:53 +01:00
fe6e3ca2b1
Unload first before retrying
...
Should free the filament if accidentally held by the fsensor.
2022-11-20 19:23:07 +01:00
5639620041
Avoid watchdog while doing VerifyFilamentEnteredPTFE
2022-11-20 17:27:36 +01:00
84d9eee61d
Resume hotend temperature if parked + MMU restarted
...
PFW-1355
2022-11-20 17:27:36 +01:00
01c1f4a8dd
Load test: Monitor unload as well
2022-11-20 17:27:36 +01:00
5c8ea4c90a
fixup
2022-11-20 17:27:36 +01:00
327f0edb17
VerifyFilamentEnteredPTFE must take into account the Extra Loading Distance
2022-11-20 17:27:36 +01:00
c9d9ba0b1a
Add a bracket around subtraction, just in case
2022-11-20 17:27:36 +01:00
ef51b5778d
Fix VerifyFilamentEnteredPTFE
...
Test should push filament first and then retract.
2022-11-20 17:27:36 +01:00
a17153f877
Make TMC mask more readable
2022-11-20 17:27:36 +01:00
f1ed2fc5c7
Fix issue where tool_change_extruder is not reset after retry
2022-11-20 17:27:36 +01:00
46f4f2658d
PFW-1432 Reduce LOC
...
If verification test fails, increment load fail statistic
2022-11-20 17:27:36 +01:00
03235c8aab
PFW-1432 restore toolchange load testing
2022-11-20 17:27:36 +01:00
adb24cd410
Increment errors in ReportError
2022-11-20 17:27:36 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
fe11b7a247
Tune Interrupted state based on unit tests
...
Now finally the printer can restart ToolChange if MMU restarted.
2022-11-20 17:27:36 +01:00
ffbd95b482
Unify naming convention (index->slot)
...
in all top level MMU-related functions
2022-11-20 17:27:36 +01:00
e414413b2e
Refactor ToolChange+LoadToNozzle
...
Add basic infrastructure for handling of repeated commands until they finish correctly.
2022-11-20 17:27:36 +01:00
10a9e0f0a0
Recover from MMU restart while performing a command
...
PFW-1427
2022-11-20 17:27:36 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
006fe110cc
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 18:47:10 +01:00
68bd7f9b19
Fix excessive flash usage.
2022-11-12 18:47:10 +01:00
ecef69012a
Fix PFW-1364 & possible comms timeout during reheat
2022-11-12 18:47:10 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
5a60a85467
PFW-1397 Increment toolchange statistic
2022-11-08 13:49:40 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
0aeb74e5b1
Intercept M708 A0xb: set ExtraLoadDistance on the printer side too
2022-10-11 15:51:01 +02:00
b0466ae20f
Add infrastructure for MMU parametrization after comm start
...
For now, only the Extra loading distance is being sent, but the infrastructure can be easily extended for other registers as well.
2022-10-11 15:51:01 +02:00
c7e4c9ce99
Allow backwards compatibility with legacy MMU g-codes
...
This piece just changes the default extra load length on the MK3 side.
The same needs to be done on the MMU side but:
- the MMU exposes its register for this (so we can change the extra load distance by writing into the register via G-code)
- the printer shall probably set this value on its own after line up of MMU communication
2022-10-11 15:51:01 +02:00
d5ca47d1a6
Merge pull request #3646 from gudnimg/fix-mmu-buttons-v2
...
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-11 13:42:39 +02:00
8882d8f2c8
Only move XY when position is known
...
I had a crash when producing an error screen and printer was unhomed.
Extruder was located at the far right side, and immediately crashed when attempting to park.
2022-10-11 07:16:52 +02:00
d6e0f47739
PFW-1403 Rename ReportErrorSource to ErrorSource for shorter code
2022-10-08 08:51:32 +00:00
D.R.racer
Alex Voinea
Guðni Már Gilbert
VintagePC
3d-gussner