josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,294 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

6294 Commits

Author SHA1 Message Date
3d-gussner 62b03066d3 Updated update-pot.sh to search also `Firmware/mmu2` resources 2022-09-16 16:21:33 +02:00
3d-gussner ca9b34c4a2 Add double down arrow to be processed correctly 2022-09-16 16:18:25 +02:00
3d-gussner d8f40f1864
Merge pull request #3597 from DRracer/mk3-mmu-thermal2 
Save some space due to shorter MMU error texts
 2022-09-16 13:46:05 +02:00
D.R.racer f18493f361 Save some space due to shorter MMU error texts 
applies https://github.com/prusa3d/Prusa-Error-Codes/pull/62
 2022-09-16 12:12:08 +02:00
3d-gussner 9c639182d3
Merge pull request #3596 from DRracer/mk3-mmu-thermal2 
Fixup MK3_MMU2 branch after rebase onto MK3
 2022-09-16 11:51:52 +02:00
D.R.racer 2d98cae8bd Fixup MK3_MMU2 branch after rebase onto MK3 2022-09-16 11:08:03 +02:00
Guðni Már Gilbert 16713aa25a Optimisation: scopeState is already set by SendReadRegister 
Saves 2 bytes of flash
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert e9f5a95d4b PFW-1362 Make sure FINDA runout is impossible with MMU disabled 
Since mmu_loop() is called in the main loop() function
when the MMU is disabled, we need to utilise the
MMU protocol layer to prevent FINDA runout from happening
if MMU is disabled.

We also need to keep in mind we probably can't trigger
a FINDA runout in the middle of a Q0 query.
So my solution now is to wait for the "Finished" state
and check if the FINDA is off during printing.

When "Finished" state appears, the FINDA value should be up
to date.
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 94119744ad PFW-1362 Change isSpoolJoinEnabled to return bool 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 65a0036dbe PFW-1362 Optimise debug message 
Saves 20 bytes of flash :)
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 998ed87f25 PFW-1362 Use PROGMEM messages 
The main purpose of these two messages is just to see if SpoolJoin is enabled or not.
"On" and "Off" are descriptive enough.

Saves 16 bytes of flash
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 63b4abb66d PFW-1362 SpoolJoin needs to known what the previous slot was 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 1010f23959 Fix an issue where findaPressed is never set 
This caused instant FINDA runout when the print starts. Now fixed :)
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert b292a5bf4e PFW-1362 temporarily don't use SpoolJoin in Tcodes 
I think in the current implementation, this will cause more harm than good.
But we can improve SpoolJoin later
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 7dcfc1484e PFW-1362 temporary debug messages 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 8610636906 PFW-1362 Add a log when FINDA filament runout is triggered 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert c5bb34f226 PFW-1362 Show if SpoolJoin is enabled or disabled at bootup 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert fb27a7d72b PFW-1362 Remove "NA" EEPROM status 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 166ecbc7d8 PFW-1362 Fsensor is not required for Spooljoin 
Since the Fsensor is not required to use SpoolJoin,
it makes little sense to me that we need the fsensor
to "enable" SpoolJoin
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert d51026d8f7 PFW-1362 Rename settings for consistency 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 7c95f87867 PFW-1362 Fsensor status is not required for SpoolJoin 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 428f4a87ed Remove unused CMake tests 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 715af8fcc2 Rename files to SpoolJoin 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert afc67332c7 PFW-1362 Initial commit 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 2276217cbb Optimisation: Remove forceMenuExpire variable 
During first layer calibration we have the live Z baby step menu
on the LCD and the user can tune their Z offset live.

Once the first layer calibration is done, we want to exit the menu
immediately. For this purpose it is much more efficient to
call lcd_return_to_status(). There is no visual difference
on the LCD for the user.

Change in memory footprint:
Flash: -34 bytes
SRAM: -1 byte
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert e39d1458a1 Fix lost changes during rebase 2022-09-16 10:23:47 +02:00
3d-gussner fae420f1e2 Fix MMU_ALWAYS_CUT enabled in variants 2022-09-16 10:23:47 +02:00
3d-gussner 8e9a49082b Set Cutter OFF if 0xff 2022-09-16 10:23:47 +02:00
3d-gussner b3ec36228d Update doxygen documentation for M704-M709 2022-09-16 10:23:47 +02:00
D.R.racer 2e7258d7a8 Include fix protocol from MMU PR#199 2022-09-16 10:23:47 +02:00
D.R.racer 4d3a5433ad Implement read/write registers for M707/M708 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 04a1a67b05 PFW-1386 Address TODO 
We want to move the Z-axis after the XY move is done.

raise_z cannot be used here because it relies
on current_position[] for all axis.

It is actually 10 bytes cheaper to use the previous method
because syncing current_position with lastpos is surprisingly expensive
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 27ff01cf91 Shorter code 
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert db1b0ea9ac Optimisation: Set lastpos using memcpy directly 
Verified the change by running the M600 gcode. All axis move as expected.

Change in memory:
Flash: -64 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert f984072eab Remove unused #define 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert f49b88c1a1 Optimisation: lcd_commands "M702 C" should be "M702" 
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 0c1052b0da Optimisation: mmu_M600_load_filament 
Don't render full screen for Loading Filament X
this is already done in load_filament_to_nozzle
so no need to do it twice

Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert bf9ba3c003 Optimisation: setTargetedHotend serial message 
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 635ae2bf20 M600: Small optimisation in if statements 
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert f297131792 M600: lcd_change_fil_state does not need to be global 
Refactor lcd_alright() to save flash

Change in memory:
Flash: -98 bytes
SRAM: -1 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 2216ba9fbf M600: Ask for which slot to use when loading 
This fixes an issue where the assumed slot to use is unknown and
the printer will hang on loading filament 100.

Another good thing is this is an old user feature request which
we have in our 3.12 milestone.

Change in memory:
Flash: +14 bytes
SRAM: -1 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 3e86bbb93f M600: Don't unload if filament is unknown 
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 05bf5de518 Fix calibrate_z_auto crashing Z-axis 
Steps to reproduce:
1. Run M45 Z after booting the printer up

Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 03b8a6e464 Use raise_z in more places 
Change in memory:
Flash: -474 bytes
SRAM: 0 bytes
 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 4758ac3f1b PFW-1399 Don't show cut filament menu if setting is not enabled 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 55d2eaf8c0 M706: Only cut filament if the setting is enabled 2022-09-16 10:23:47 +02:00
Guðni Már Gilbert 66994d010d Fix a few cases where rebase overwrote stuff 2022-09-16 10:23:47 +02:00
D.R.racer 0537908d8c Fixup 2 2022-09-16 10:23:47 +02:00
D.R.racer 37b50477cd Fixup after rebase onto MK3 2022-09-16 10:23:47 +02:00
D.R.racer 18423685b6 Cleanup ExpectsResponse usage 2022-09-16 10:22:39 +02:00