6714d4df3f
Merge pull request #4547 from 3d-gussner/MK3_PL_Fixes
...
Fix few PrusaLink/PrusaConnect reported issue
2024-01-29 13:08:26 +01:00
e7ef3d6db5
Fix nitpicking
2024-01-29 13:07:48 +01:00
52ba1b534d
Add HOST power panic auto recovery option
...
Change `PRINT_TYPE_USB` to `PRINT_TYPE_HOST`
Fix more rebase issues
Fix rebase issue again
2024-01-29 13:07:48 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
e5c5720d03
Merge pull request #4583 from gudnimg/PFW-1553
...
PFW-1553 fix regression where SD card file is not closed when stopping paused print
2024-01-29 09:48:55 +01:00
abcb1017f3
PFW-1553 fix regression where SD card file is not closed when stopping paused print
...
When a print is paused, card.sdprinting is set to false. Instead we can check
if the SD card has been mounted and try to close the file.
The closefile() method will check internally whether or not the file is open.
2024-01-27 15:21:08 +00:00
8fa97cffda
Merge pull request #4576 from 3d-gussner/MK3_Improve_Versioning_and_Dump
...
PFW-1307: Add commit number and hash to `M115`
2024-01-23 15:57:23 +01:00
3957dc91aa
Add commit number and hash to `M115`
...
Don't show UUID only if defined
2024-01-22 16:31:23 +01:00
b80965731f
Merge pull request #4421 from gudnimg/sd-card-mount-opt
...
cleanup: Don't set root directory if SD card fails to mount + 3 renames
2024-01-22 09:11:19 +01:00
02b91dc2cb
Merge pull request #4563 from 3d-gussner/MK3_Quick_nozzle_change_menu
...
Add nozzle diameter change to main menu for REVO builds
2024-01-19 14:26:18 +01:00
b56330819c
Merge pull request #4573 from 3d-gussner/MK3_Improve_build
...
Improve cmake build
2024-01-19 14:23:17 +01:00
902c2f71c9
New hex file naming
2024-01-19 14:21:47 +01:00
a21647e0a7
Merge pull request #4574 from 3d-gussner/MK3_Remove_travis
...
Remove Travis checks
2024-01-19 14:12:27 +01:00
8e91fb978b
Remove Travis checks
...
Github actions work well and no need for additional travis check.
2024-01-19 08:28:35 +01:00
6da1ec924b
Merge pull request #4567 from 3d-gussner/MK3_M850_show_active_sheet
...
M850 shows active sheet
2024-01-15 08:56:04 +01:00
339a10eb81
Merge pull request #4556 from gudnimg/usb-timer-fix
...
Restart USB timer during long moves
2024-01-12 14:41:51 +01:00
98889cafbf
Merge pull request #4560 from gudnimg/fix-print-paused
...
Fix pause indicator when print job timer is not used
2024-01-12 14:41:33 +01:00
f3e5444d47
M850 shows active sheet
...
Prevent sheet being active if not initialized
2024-01-12 13:41:55 +01:00
13fb11889e
Minor cosmetic changes voted by community
2024-01-12 07:20:33 +01:00
adf2ecabc1
Fix pause indicator when print job timer is not used
...
Fixes #4554
Change in memory:
Flash: +50 bytes
SRAM: +1 byte
2024-01-11 19:30:30 +00:00
d5a5835059
Add nozzle change to main menu when QUICK_NOZZLE_CHANGE is defined
...
Add Nozzle diameter to Info screen when printer inactive and QUICK_NOZZLE_CHANGE defined
Solves #4488
2024-01-11 07:36:51 +01:00
8d50d29776
Merge pull request #4553 from sarusani/shutdownHostLCDEntry
...
Add Shutdown host to LCD Menu
2024-01-11 07:33:16 +01:00
6424703d2b
Merge pull request #4562 from 3d-gussner/MK3_Fix_Tune_Auto_home_layer_shift
...
PFW-1551: Fix Pause->Tune->Auto Home layer shift
2024-01-11 07:31:30 +01:00
f18fc2bbce
Fix Pause->Tune->Auto Home layer shift
2024-01-09 11:07:29 +01:00
d6250592b2
Merge pull request #4559 from 3d-gussner/MK3_PFW-849_Selftest
...
PFW-849 Unify Selftest messages
2024-01-08 08:25:23 +01:00
2199ef8bc4
Add translations
2024-01-06 09:40:51 +01:00
ae31c0ec31
optimisation: used expired() instead of elapsed()
...
If the timer is expired, then the timer is stopped. This is OK since
we are starting the timer again anyway
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2024-01-06 00:23:19 +00:00
09952db139
Restart USB timer during long moves
...
When long moves are planned and executed the USB timer can expire.
In PrusaSlicer 2.7.1 the Toolchange command (T0, T1, etc.) is sent while the USB timer is expired. This will trigger
a manual MMU unload in the firmware. Not only does this trigger a loud beep from the buzzer, but this will also significantly increase print time.
The issue only affects host prints. SD card printing does not have this issue.
Fixes #4551
The fix in this commit is the following:
If there are blocks queued while printing via host AND the USB timer is halfway expired WHILE executing a move. Then simply restart the timer to keep it alive.
Change in memory:
Flash: +62 bytes
SRAM: 0 bytes
2024-01-06 00:23:19 +00:00
59093107fd
Add #ifdef HOST_SHUTDOWN
2024-01-06 00:45:06 +01:00
49f9d7abdc
Add Shutdown host to LCD Menu
...
Add "Shutdown host" entry to LCD menu if printer is not active and host is connected.
2024-01-06 00:45:06 +01:00
db044163f9
Unify Selftest messages
2024-01-04 11:18:07 +01:00
ba027dd41e
Merge pull request #4552 from gudnimg/reprint-opt
...
reprint: reduce duplicate code
2024-01-03 14:45:57 +01:00
9bd043c83b
Move restore_file_from_sd out of power panic file
...
This function is not specific to power panic. Some printer models
do not have power panic enabled.
This change fixes a build failure
No change in memory
2023-12-30 12:19:51 +00:00
ceec54f026
reprint: reduce duplicate code
...
restore_file_from_sd function now supports any
filename extension. If a print was finished (to allow reprinting) then the
EEPROM filename and extension should always be valid.
Change in memory:
Flash: -312 bytes
SRAM: 0 bytes
2023-12-30 12:06:46 +00:00
45d70b195d
Merge pull request #4405 from gudnimg/mmu-response-fix
...
MMU: always wait for a request's expected response
2023-12-22 16:34:27 +01:00
8aa344ea38
Merge pull request #4545 from 3d-gussner/MK3_Fix_M850
...
Fix M850 output and documentation
2023-12-19 17:26:16 +01:00
c9ea5fa746
Fix M850 output and documentation
2023-12-19 15:34:16 +01:00
15a3fb998c
Merge pull request #4541 from sarusani/actionReadyOpt
...
Remove leading M118 from "action:ready" & "action:not_ready"
2023-12-19 15:02:09 +01:00
b894fcc11c
Merge pull request #4534 from sarusani/oozePrevention
...
Prevent oozing after filament load
2023-12-19 15:01:50 +01:00
2c4474b1dd
Remove leading "M118"
2023-12-16 12:51:17 +01:00
e5d6d72d23
Add #ifdef
2023-12-15 14:09:46 +01:00
1407f29362
Prevent oozing after filament load
...
Retract 10mm of filament after loading
2023-12-14 14:20:46 +01:00
c384524877
mmu: always wait for a request's expected response
...
If a planned request is activated when the current status is finished
then the firmware must wait for the response when the request
is expecting it
An example is a register read or a register write.
manage_response not return unless the register has been read or
written. And we must see the response to know if an error should be
reported.
Step to reproduce issue:
1. Fail selector homing
2. Select 'Tune' item
3. Observe issue. In this situation you can see the value
for the previous register read is shown. Which is 0. This very timing dependent and does not always happen.
4. Repeat step 2 until the issue appears. It may take a few times.
2023-12-10 12:54:18 +00:00
40786a24e0
Rename "cardOK" to "mounted"
...
Sync the Prusa firmware a little bit with Marlin 2.1
2023-12-09 10:52:26 +00:00
d94f263843
Rename initsd() to mount()
...
Sync the Prusa firmware with Marlin 2.1 a little bit.
2023-12-09 10:50:30 +00:00
42855f9f13
Rename setroot() to cdroot()
...
This way the name is the same as Marlin 2.1
2023-12-09 10:50:30 +00:00
e0eb8b8a24
optimisation: if SD card fails to mount, do not set root directory
...
I noticed this on Marlin 2.1 side, it should apply here as well.
2023-12-09 10:50:30 +00:00
3d-gussner
gudnimg
sarusani