6bdab7bf48
filecheck fix: we need to check buffered gcodes after finding end of gcode file
2017-11-02 18:40:22 +01:00
5cea6aee37
ifdef changed to ifndef in config files
2017-10-30 10:13:23 +01:00
c1ed9e1466
configuration files updated
2017-10-30 09:59:36 +01:00
60807c0f47
added SUPPORT_VERBOSITY defines to free some space
2017-10-30 09:53:22 +01:00
316c0a497c
changed version
2017-10-27 18:15:01 +02:00
7968d1b3cb
initi sort order loop
2017-10-25 16:57:26 +02:00
98e203294d
removing SD during sorting fixed
2017-10-25 16:30:55 +02:00
f53426b639
Fixed sorting inside subdirectories, removed dead code
2017-10-24 15:15:49 +02:00
07c0413f43
ifdef for SNMM
2017-10-23 01:13:56 +02:00
98d0abcf2a
Merge pull request #245 from PavelSindler/lin_adv_issue
...
LIN_ADVANCE: high e_steps value error fixed
2017-10-23 00:37:59 +02:00
37e989df79
Merge pull request #249 from PavelSindler/languages
...
Translation for new messages
2017-10-23 00:35:31 +02:00
aecf3a88c0
lengths updated, special characters removed
2017-10-23 00:33:43 +02:00
6baea1b169
Merge pull request #246 from PavelSindler/calibration_wizard_menu_fix
...
multiscreen yes/no dialog updated
2017-10-22 23:58:21 +02:00
71625e5f75
Merge branch 'MK2' into MK2-Patch
2017-10-20 17:59:30 +02:00
2c63ed5d43
multiscreen yes/no message updated: custom characters
2017-10-20 16:57:16 +02:00
0438a8effd
Merge pull request #235 from thess/M110-fix
...
Fix parsing of M110 command
2017-10-20 16:25:14 +02:00
997937bd4c
advance_isr changed
2017-10-20 09:16:30 +02:00
ce04b518cc
plan_set_z_position updated
2017-10-19 17:21:56 +02:00
5c118a7fac
whitespace
2017-10-19 16:53:07 +02:00
f42b81fa38
linear advance fix: advance_isr and plan_set_e_position
2017-10-19 16:50:49 +02:00
f3c539d1ff
Merge pull request #26 from 3d-gussner/MK2
...
Merge pull request #241 from PavelSindler/slow_printer_fix
2017-10-17 12:47:40 +02:00
68f9dabdf2
Merge pull request #241 from PavelSindler/slow_printer_fix
...
slow menus and glitches fixed: setup second serial only in farm mode
2017-10-17 11:19:37 +02:00
c2478ae7d3
setup second serial port only in case it is selected
2017-10-16 17:03:38 +02:00
8304deced2
translations from english to all languages - initial version
2017-10-16 11:25:18 +02:00
713527bf4a
Fixes power mode in Tune menu...
...
...and changed the filament runout procedure
Druing the print you can access the Tune menu and the new feature Power Mode [auto] was added, but choosing it it goes to the Settings menu. Here the fix for that in the ultralcd.cpp.
Also changed the filament runout procedure in Marlin_main.cpp to use M600 command (origin idea/update from Marlin 1.1.x) defined in the 1_75mm_MKx_yyyy_E3dv6full.h files
2017-10-15 12:16:35 +02:00
8dd9a4308e
initial
2017-10-15 09:40:35 +02:00
67d824d914
Fix parsing of M110 command
2017-10-14 11:39:25 -04:00
6e3174cba2
Merge pull request #233 from PavelSindler/xyz_details_pauses_print
...
Xyz details pauses print when printing from USB - hotfix: hide menu when printing
2017-10-13 14:09:20 +02:00
829e0f0046
Merge pull request #230 from PavelSindler/check_file_fix
...
Check if file is complete fixed; snmm: set bowden lengths during setup before starting wizard
2017-10-13 14:00:53 +02:00
415a717f0a
xyz details menu pauses print when printing from USB hotfix
2017-10-13 13:57:23 +02:00
06e2782ad3
Merge remote-tracking branch 'upstream/MK2' into MK2
2017-10-12 18:50:46 +02:00
156aed0fdc
Merge pull request #201 from thess/patch-1
...
Put space between filename and size (fix M20 / lsDive)
2017-10-12 18:46:39 +02:00
5c07437b42
set NOT_BUSY host keepalive state at the beginning of loop
2017-10-12 15:54:24 +02:00
038f37854a
status message when mesh bed leveling is finished fixed
2017-10-12 15:28:52 +02:00
56d38a8a10
reset cmdqueue in the end of test if file is complete, no sorting in the end of print
2017-10-12 14:23:45 +02:00
5601dd276d
wizard for snmm fix
2017-10-11 18:49:49 +02:00
635656cf0b
merging with upstream
2017-10-11 17:51:23 +02:00
69fb8d7013
Put space between filename and size (fix M20 / lsDive)
...
Output longFilename if present.
2017-10-11 11:28:51 -04:00
1b3f4e5871
fixed typo
2017-10-10 16:17:52 +02:00
979fb2cc60
length of strings on language.en updated
2017-10-10 15:15:53 +02:00
b9d790a63b
Remove build warnings (all) - fix spelling errors
...
Updated to: 3.1.0-RC1
Some of the format changes introduced were done to improve readabilty and
remove compiler warnings about needing parenthesis
Some code restructuring has been done to eliminate unused code and variables
Cleanup defined but unused functions
2017-10-07 15:29:33 -04:00
2a22fa9fa9
Merge pull request #217 from PavelSindler/v2_cal
...
First layer calibration: print small rectangular in the end of calibration
2017-10-04 21:04:19 +02:00
4297d90309
version changed
2017-10-04 20:54:17 +02:00
e8c4677506
rectangular object enlarged, counting E improved
2017-10-04 14:48:16 +02:00
6b7866b7be
small rectangular added to first layer calibration
2017-10-04 02:37:46 +02:00
3e3102ad74
added defines for auto power
2017-10-04 00:49:46 +02:00
ff2fa67adc
init
2017-10-04 00:43:17 +02:00
7306e08471
Merge pull request #215 from PavelSindler/sorting
...
Sorting files improvements
2017-10-03 23:30:53 +02:00
7bf30eb8dc
changed version
2017-10-03 23:28:36 +02:00
fa815e2953
Merge pull request #208 from PavelSindler/MK2
...
pause print resume fix for extruder in absolute mode
2017-10-03 23:27:02 +02:00
PavelSindler
PavelSindler
3d-gussner
3d-gussner
Ted Hess