74e15ac233
Rename EN_ONLY to EN_FARM
...
remove DEBUG/DEVEL/ALPHA/BETA lcd warning
2022-09-29 16:39:02 +02:00
c7b500af1e
BETA firmware message only in English
...
Rephrase BETA firmware message to fit on two screens
ALPHA message same as DEVEL
Fix ALPHA DEVEL message
2022-09-29 10:48:16 +02:00
f7d4095479
Merge branch 'MK3' into MK3_MMU2_fix1
2022-09-21 15:18:44 +02:00
2cdd3ba364
Move strings to progmem
2022-09-21 14:53:54 +02:00
16d1ef8510
Merge pull request #3560 from leptun/splash_version
...
Show firmware version on splash screen
2022-09-21 14:47:41 +02:00
183e21aa0b
Merge pull request #3599 from 3d-gussner/MK3_MMU2_messages
...
PFW-1339 - Update MMU2 translations
2022-09-21 10:27:01 +02:00
6a470791d3
Allow sending uint16_t values to registers
2022-09-19 15:13:37 +02:00
539cdbfeea
Lower MSG_ rows
2022-09-17 08:48:56 +02:00
2d98cae8bd
Fixup MK3_MMU2 branch after rebase onto MK3
2022-09-16 11:08:03 +02:00
715af8fcc2
Rename files to SpoolJoin
2022-09-16 10:23:47 +02:00
afc67332c7
PFW-1362 Initial commit
2022-09-16 10:23:47 +02:00
b3ec36228d
Update doxygen documentation for M704-M709
2022-09-16 10:23:47 +02:00
4d3a5433ad
Implement read/write registers for M707/M708
2022-09-16 10:23:47 +02:00
04a1a67b05
PFW-1386 Address TODO
...
We want to move the Z-axis after the XY move is done.
raise_z cannot be used here because it relies
on current_position[] for all axis.
It is actually 10 bytes cheaper to use the previous method
because syncing current_position with lastpos is surprisingly expensive
2022-09-16 10:23:47 +02:00
db1b0ea9ac
Optimisation: Set lastpos using memcpy directly
...
Verified the change by running the M600 gcode. All axis move as expected.
Change in memory:
Flash: -64 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
f984072eab
Remove unused #define
2022-09-16 10:23:47 +02:00
0c1052b0da
Optimisation: mmu_M600_load_filament
...
Don't render full screen for Loading Filament X
this is already done in load_filament_to_nozzle
so no need to do it twice
Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
bf9ba3c003
Optimisation: setTargetedHotend serial message
...
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
635ae2bf20
M600: Small optimisation in if statements
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
f297131792
M600: lcd_change_fil_state does not need to be global
...
Refactor lcd_alright() to save flash
Change in memory:
Flash: -98 bytes
SRAM: -1 bytes
2022-09-16 10:23:47 +02:00
2216ba9fbf
M600: Ask for which slot to use when loading
...
This fixes an issue where the assumed slot to use is unknown and
the printer will hang on loading filament 100.
Another good thing is this is an old user feature request which
we have in our 3.12 milestone.
Change in memory:
Flash: +14 bytes
SRAM: -1 bytes
2022-09-16 10:23:47 +02:00
3e86bbb93f
M600: Don't unload if filament is unknown
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
05bf5de518
Fix calibrate_z_auto crashing Z-axis
...
Steps to reproduce:
1. Run M45 Z after booting the printer up
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
03b8a6e464
Use raise_z in more places
...
Change in memory:
Flash: -474 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
55d2eaf8c0
M706: Only cut filament if the setting is enabled
2022-09-16 10:23:47 +02:00
66994d010d
Fix a few cases where rebase overwrote stuff
2022-09-16 10:23:47 +02:00
37b50477cd
Fixup after rebase onto MK3
2022-09-16 10:23:47 +02:00
2616df66af
PFW-1386 st_get_position_mm() is more accurate when using endstops (not homed printer)
...
If the endstops kick in, then st_get_position_mm shows the actual travel distance. current_position[Z-AXIS] does not get updated correctly thus we cannot use it when unhomed.
current_position[Z-AXIS] is later set to Z_MAX_POS,
we cannot use that either to calculate the travel distance
2022-09-16 10:22:39 +02:00
f409426bdc
PFW-1386 Refactor raise_z
...
Removed the "plan" parameter.
We were incorrectly returning from the function if the printer was homed,
but plan = false. This would leave current_position with an incorrect value
If the printer is homed => finish the move and return the travel distance
If the printer is not homed => rely on end stop to prevent damage,
return travel distance even if the endstop stopped the move.
2022-09-16 10:22:39 +02:00
4a1479b5bc
PFW-1386 Clamp Z-axis when homed
2022-09-16 10:22:39 +02:00
fa6e30389a
PFW-1386 Add a TODO
...
When recovering the Z-axis in M600, we'd like the Z move to
happen after the XY move.
2022-09-16 10:22:39 +02:00
ff91b4670d
PFW-1386 Use same code for Z-lift in M600 as in M701/M702
...
This reduces flash usage by 128 bytes!
2022-09-16 10:22:39 +02:00
38952f1f33
PFW-1386 Optimisation: st_synchronize is not needed after raise_z_above
...
Saves 16 bytes of flash
2022-09-16 10:22:39 +02:00
214b6a9220
PFW-1386 M701, M702: Move Z-axis using relative position
...
* Created a new function raise_z() which will move the Z axis by some
X millimeters. If plan = false, the function will return the
actual travel distance since the move is blocking.
* raise_z_above() is refactored to call raise_z()
Now the M701 and M702 will move the Z-axis relatively, and also
when done, revert the Z axis position when done.
This is a similar behavior as in Marlin 2.
2022-09-16 10:22:39 +02:00
217b537961
PFW-1386 Remove old debug message to save space
...
Saves 34 bytes of flash
2022-09-16 10:22:39 +02:00
bb0bbfb45f
PFW-1386 Minor correction to M707 and M708 useage example
2022-09-16 10:22:39 +02:00
d78c575399
PFW-1386 Address should accept hexidecimal values
...
Now these are equal:
M707 A255 C1
M707 A0xFF C1
Both address inputs are interpreted as FF
2022-09-16 10:22:39 +02:00
ba7dae5c79
PFW-1386 I don't see a reason for these lines
...
So I'm removing them
2022-09-16 10:22:39 +02:00
3192a95e78
PFW-1386 Optimise default value assign z_target
2022-09-16 10:22:39 +02:00
20c865c2d4
PFW-1386 Implement 'U' parameter for M702
...
Similar to 'L' in M701, this does not apply to the MMU
The U parameter controls how much mm the extruder will unload
Default value is 80mm
2022-09-16 10:22:39 +02:00
7e9166976f
PFW-1386 Implement 'L' parameter for M701
...
It is only used when the MMU is disabled. With the MMU we use a defined ramming sequence.
When the MMU is disabled I borrowed the usages from Marlin 2.
The L parameter only defines the length for the "fast" load length.
Default value is 70mm, same as M600
2022-09-16 10:22:39 +02:00
94dd4aec73
PFW-1386 M701 now loads to nozzle with MMU
2022-09-16 10:22:39 +02:00
8462b38446
PFW-1386 Create a common function for M704 to M706
...
Saves 36 bytes of flash
2022-09-16 10:22:38 +02:00
32ec1587b9
PFW-1386 Implement changes to M702
2022-09-16 10:22:38 +02:00
9b0d89213b
PFW-1386 Raising Z-axis during M701 is now done via Gcode
...
If the Z-parameter is not issued, then default behavior will raise
the Z-axis by MIN_Z_FOR_LOAD
2022-09-16 10:22:38 +02:00
5bb36546b4
PFW-1386 Implement changes to M701
2022-09-16 10:22:38 +02:00
fb087fc535
PFW-1386 Add M707 and M708
...
WriteRegister and ReadRegister function will create new compiler
warnings due to unused parameters, we can ignore it for now.
2022-09-16 10:22:38 +02:00
3664d29b21
PFW-1386 Add M709
2022-09-16 10:22:38 +02:00
de0539b630
PFW-1386 Implement M704, M705, and M706
2022-09-16 10:22:38 +02:00
022aa53b2d
Remove active_extruder completely
...
we only use 1 extruder + saves ~800B
2022-09-16 10:22:38 +02:00
3d-gussner
DRracer
Alex Voinea
Yuri D'Elia
D.R.racer
Guðni Már Gilbert