josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,395 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

6395 Commits

Author SHA1 Message Date
Yuri D'Elia b672be90b2 Do not overwrite saved values if TM error occurs while paused 2022-08-21 14:53:42 +02:00
Yuri D'Elia d8d085287e Re-enable bed temperature automatically for transitory errors 2022-08-21 14:49:12 +02:00
Yuri D'Elia 30dccb3252 Switch to ATOMIC sections instead of cli/sei/CRITICAL_SECTION 2022-08-21 14:49:12 +02:00
Yuri D'Elia ee12cbd58e Do not prompt on M115 if FW version check has been disabled 
As done for M862.4, do now show an upgrade prompt if FW version check as
been disabled in the Settings -> HW Setup -> Checks menu.
 2022-08-20 16:55:32 +02:00
DRracer 3ebd8b88a4
Merge pull request #3486 from gudnimg/gudni-optimisation 
Flash optimizations in loop() and status screen menu
 2022-08-19 17:21:17 +02:00
DRracer 0a8d2a3224
Merge pull request #3456 from wavexx/filament_load_consistency 
Cleanup: use more constants in M701
 2022-08-19 17:14:54 +02:00
DRracer 84888507e3
Merge pull request #3557 from wavexx/fix_g28_code_value 
G28: check for X/Y/Z parameters before calling code_value_long
 2022-08-19 17:12:07 +02:00
DRracer 2a0989c440
Merge pull request #3551 from wavexx/eof_crash_reentry 
Prevent re-entry in EOF command processing
 2022-08-19 17:07:21 +02:00
Alex Voinea 81ec94db64 Show firmware version on splash screen 2022-08-15 16:18:17 +03:00
Yuri D'Elia 06d19b472a G28: check for X/Y/Z parameters before calling code_value_long 
Fixes #3555, thanks to @toombaumarkt
 2022-08-07 00:36:54 +02:00
Yuri D'Elia 3a1914f2fb Simplify printingHasFinished 
Unswitch the call to file.close().

Do not call quickStop(): motion has already completed due to
st_synchronize.
 2022-08-06 23:29:34 +02:00
Yuri D'Elia 4f22de2333 Do *not* shorten the current command in printer_smodel_check 
printer_smodel_check was incorrectly substituting the final " with a
null in the command to simplify the model string comparison, but in
doing so was also corrupting the next pop from the cmdqueue.

We can modify the current strchr_pointer as long as we *don't* change
it's length. This can cause an incorrect extra read from the queue,
resulting in the last command to be completely ignored.
 2022-08-06 23:15:46 +02:00
Yuri D'Elia 68c04ca2f6 Switch a few pointers that don't manipute strings to const 2022-08-06 23:08:03 +02:00
Yuri D'Elia a533ba3574 Reset sdpos_atomic when starting a new SD print 
Fix an incorrect SD offset on the first G-Code command when the second
SD print is started.
 2022-08-06 22:16:50 +02:00
VintagePC 598991dc69 - Fake-gen some folders to organize targets 
- Support building both en and multilang together
 2022-08-06 12:24:30 -04:00
VintagePC 04ea371936 Set source files explicitly for reproducible build 2022-08-06 10:57:03 -04:00
VintagePC ea920536cb Add version info to filenames 2022-08-05 21:03:41 -04:00
VintagePC 1e7e9aa391 fix typo 2022-08-05 17:45:48 -04:00
VintagePC 5f12c7f10b * Synchronize flags with arduino 
* Use cmake -E cat for merge
* Set AR/ranlib to GCC flavour
 2022-08-05 16:54:07 -04:00
vintagepc 7ddeb84486
Merge pull request #8 from 3d-gussner/build-with-cmake 
Update Windows MAC download urls
 2022-08-05 16:47:02 -04:00
3d-gussner 9e52798224 Update Windows MAC download urls 
Add python dependencies for translations
 2022-08-05 16:23:35 +02:00
3d-gussner 8cbe69e285 Update RepRap documentation 2022-08-02 17:56:53 +02:00
3d-gussner e60bb935e5 Remove test.sh from travis build 2022-08-02 07:38:53 +02:00
3d-gussner 9633f34e89
Merge pull request #3544 from 3d-gussner/MK3_Fix_po_for-MK25s 
Sync PF-build.sh and MK404-build.sh with MK3_3.11.1 branch
 2022-07-29 16:13:59 +02:00
Yuri D'Elia c0b5fea525 Prevent re-entry in EOF command processing 
cmdqueue will run commands when EOF is reached without returning to the
main loop, which is already incorrect.

However, since it needs to ensure the queue is empty, an st_synchronize
call can result in a re-entrant call to get_command, which will
reprocess EOF again. Even if we removed st_synchronize, another command
could be picked by an unsuspecting manage_inactivity() somewhere else.

Short-circuit EOF processing by closing the file early and checking for
the file state early in get_command.

This should fix #3549
 2022-07-29 15:55:54 +02:00
VintagePC ca0d6caddf Be explicit on languages 2022-07-28 18:16:15 -04:00
VintagePC 25ee23ca76 clean indentation 2022-07-28 08:11:11 -04:00
VintagePC fa1be17b7c cmake lang control 2022-07-28 08:07:08 -04:00
VintagePC f453403ea9 bugfix 2022-07-27 22:25:40 -04:00
VintagePC 8a4b395aec no-xflash case, add convenience target to build absolutely everything. 2022-07-27 20:24:12 -04:00
VintagePC 5bc936d4f5 Remove helper file, fix lang ordering, check sizes 2022-07-27 19:40:11 -04:00
VintagePC 9001d98061 Get version/dir from bootstrap, add pyelftools 2022-07-27 17:58:58 -04:00
vintagepc d4a46a09c6
Merge pull request #7 from 3d-gussner/build-with-cmake 
Update bootstrap
 2022-07-27 17:21:36 -04:00
3d-gussner e187538973 Update bootstrap 2022-07-27 15:01:07 +02:00
Guðni Már Gilbert ca8d47a6da If lcd_draw_update is set outside lcd_status_screen 
then render the sceen without delay

This adds only 10 bytes of flash
 2022-07-27 11:55:08 +00:00
VintagePC 739ccdf804 remove invalid command 2022-07-27 07:22:42 -04:00
Guðni Már Gilbert f6fd91a235 Optimise lcd_status_screen 
Saves 20 bytes of flash
 2022-07-27 11:14:18 +00:00
Guðni Már Gilbert 33a0a58810 Optimise manage_inactivity call in loop() 
Saves 12 bytes of flash
 2022-07-27 11:14:17 +00:00
VintagePC f03e3c40ee WIP/proof-of-concept 2022-07-26 19:33:09 -04:00
Yuri D'Elia c5c2557c5e Improve M310 documentation 2022-07-25 17:30:22 +02:00
Yuri D'Elia 41abe1689c Block LCD during temperature model autocalibration 2022-07-25 17:30:22 +02:00
Yuri D'Elia 79161f829e Remove last_alert_sent_to_lcd and simplify mintemp alert automaton 
Thanks to LCD message priorities this not needed anymore and it's just
overhead.
 2022-07-25 17:30:22 +02:00
Yuri D'Elia 374b829fb6 Generalize menu_block_entering_on_serious_errors for menu lockout 
Call this variable menu_block_mask instead. We don't need to know the
exact reason of why we're locking the menu.

We will be able to reuse this to prevent menu entry during more
activities in a cleaner way than testing for each condition as it's
currently done for both menu entry and longpress.
 2022-07-25 17:30:22 +02:00
Yuri D'Elia 49a288e6cf Restore the "MINTEMP * fixed" message 
Set the LCD messages with the correct priority
 2022-07-25 17:30:22 +02:00
Yuri D'Elia 4ca0012077 Prevent longpress if a serious error is set 2022-07-25 17:30:22 +02:00
Yuri D'Elia cb3fec5cac Improve M310 documentation 2022-07-25 17:30:22 +02:00
Yuri D'Elia e77a5345a2 Do not show "THERMAL ANOMALY" with "M310 B0" 
This allows us to use "M310 B0 W0.01" as a way to report the current
error continuosly on the serial without 1) more code and 2) without
preventing regular usage.
 2022-07-25 17:30:22 +02:00
Yuri D'Elia 19df196e1f Better differentiation between pause/paused resume/resumed states 
Use OCTOPRINT_ASK_* for the present form of actions. In these cases the
host will perform the pausing manouvers for us.

Use OCTOPRINT_* instead for the past tense forms when we are in charge.

Also always emit the action, whether we are or not sd-printing. This is
due to the new Stopped handling behaving correctly in either case.
 2022-07-25 17:30:22 +02:00
Yuri D'Elia 39ad53ab11 Simplify fan checks now that lcd pause works correctly 2022-07-25 17:30:22 +02:00
Yuri D'Elia 1eb7871bab Also save fan speeds during a thermal error pause 
Similarly to temperatures, the fan speed is overwritten and needs to be
restored appropriately.
 2022-07-25 17:30:22 +02:00