96707aadcb
Fix timeout making UI freeze
2022-12-30 12:49:57 +01:00
92cf8da45e
Remove unused defines
2022-12-30 12:49:57 +01:00
df65212449
Add yes-no choice to M862 warning
...
Fixes #3421
Change in memory:
Flash: -98 bytes
SRAM: 0 bytes
2022-12-30 12:49:57 +01:00
cc3d36c78f
Replace labs with fabs
...
Both degHotend and degTargetHotend return a float
In this case it is better to use fabs()
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2022-12-29 08:54:50 +01:00
03511a5a7c
Remove redundant ultralcd includes in Marlin_main
...
This also removes two definitions
- ULTRALCD
- LCD_USE_I2C_BUZZER
Neither of them are defined anywhere
2022-12-27 12:03:56 +00:00
9757502abc
Remove pins_arduino.h include
...
This header is already included with Arduino.h which
is included in Marlin.h header.
2022-12-27 12:03:14 +00:00
72857c902c
drop conv2str dependency in Marlin_main
2022-12-27 11:59:22 +00:00
fea608c8c4
A few more meassuring typos
2022-12-22 12:54:42 +01:00
b3790f4094
Typo: meassure -> measure
2022-12-22 12:54:42 +01:00
52941b1111
Rename xyzcal_meassure_center back to xyzcal_meassure_enter
...
Keep the enter/leave pairs
2022-12-22 12:54:42 +01:00
515a625180
Typo: hysterezis -> hysteresis
2022-12-22 12:54:42 +01:00
8414c272bf
Merge pull request #3787 from gudnimg/PFW-1439
...
PFW-1448 Fix underextrusion + compensate load to nozzle extruder sequence for Extra Loading Distance
2022-12-22 11:07:28 +01:00
9ca7760c2e
Merge pull request #3830 from 3d-gussner/MK3_XYZ_cal_fix
...
MK3: XYZ cal change message and add LCD ouput
2022-12-20 14:16:49 +01:00
0bcb4ab59d
Merge pull request #3822 from wavexx/tm_partial_lock
...
MK3: TM: Prevent lockout on invalid model values
2022-12-20 14:13:56 +01:00
7fef570d1b
Change xyz cal message `up to 24 min.` instead `approx. 12 min.`
2022-12-20 10:30:53 +01:00
355b670cd4
Remove SWSPI which is not used/implemented
2022-12-20 10:10:45 +01:00
2b38080c7e
Merge pull request #3833 from leptun/MK3_fix_MK2.5_softReset
2022-12-20 10:02:14 +01:00
ea6450f072
Add LCD output during xyz calibration
2022-12-20 08:36:19 +01:00
65f5b9e53d
Merge pull request #3818 from wavexx/tm_default_state
...
TM: Provide full defaults for model data and enable it by default
2022-12-20 07:08:25 +01:00
62ea78d46e
Handle configurable distance past gears
2022-12-19 23:49:12 +01:00
70356b71df
Handle filament sensor position that is not 0
2022-12-19 23:41:43 +01:00
c72ae8a2f3
PFW-1439 Remove parameters from execute_load_to_nozzle_sequence
2022-12-19 21:12:12 +00:00
6ee5f08505
PFW-1439 Compensate load to nozzle extruder sequence for Extra Loading Distance
...
The Extra Loading Distance is configurable by the user.
We need to compensate the hardcoded sequence
such that it does not extrude too much or
too little. Currently the firmware
extrudes too little.
2022-12-19 21:12:11 +00:00
97ddcc66bb
Merge pull request #3839 from leptun/MMU2_split_variant_config
...
MMU2 split variant config
2022-12-19 20:31:01 +01:00
c0f96e062b
TM: Force initialization after reset
2022-12-19 18:08:01 +01:00
ba0f051f72
Revert accidental removal of check
2022-12-18 15:55:48 +01:00
4c32e8b403
PFW-1457 make CHECK_FSENSOR into a function
2022-12-18 12:23:20 +00:00
5c1c6d9f3b
Adjust MMU2 specific distances
2022-12-18 10:30:43 +01:00
8623d9ff55
Split the mmu2 config into MMU2 and MMU2S
2022-12-18 09:58:20 +01:00
fee68b0f0d
PFW-1457 Do not unload at start of First Layer Cal
...
Fixes issue where First Layer Cal. triggers an unload before any
filament is loaded
The purpose of this if() statement is to handle the case where
a user or developer is sending T-codes to the printer directly
via Serial. Such as when one first sends T0 and then T4.
And unload must be triggered in-between, we can do this automatically
if FINDA detect filament.
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2022-12-18 05:51:21 +00:00
dba3428ef2
Improve MSG_ACK_ERROR message
2022-12-17 20:25:47 +01:00
80c7790e87
Also prevent longpress when Stopped
2022-12-17 17:30:44 +01:00
271523ad45
TM: Disallow preheat/filament actions when stopped
...
Require acknowledgement first
2022-12-17 17:00:33 +01:00
f8290f25cd
TM: Allow to resume without a running print
...
If there is no running print, and the printer is Stopped, add a new
"Acknowledge error" menu entry to unlock the printer.
This simply calls lcd_print_stop(), which is identical in behavior to a
thermal error with a running print.
2022-12-17 16:48:39 +01:00
0972ef70d0
Use menu_set_block() in ThermalStop()
...
Set a menu block for fatal thermal errors instead of abusing
lcd_return_to_status() to kick the user out of the menus.
This now allows a thermal model error to be recoverable through menu
access.
2022-12-17 16:42:22 +01:00
8d719efa79
Do not show/call LCD status updates when unchanged
...
This mostly prevents useless serial noise
2022-12-17 16:35:26 +01:00
365f845c99
TM: correctly mark repeated anomalies
2022-12-17 16:33:42 +01:00
6e2f016655
TM: Clear the Stopped state when stopping the current print
...
We allow resuming from the LCD via start print and resume print,
it makes sense to clear the error on stop too.
For this reason distinguish whether the action is performed
automatically or manually (ie: interactively).
The error is only cleared when the command is run interactively.
2022-12-17 16:11:31 +01:00
119dc10b8f
Rename print_stop() to lcd_print_stop_finish() for clarity
2022-12-17 16:03:03 +01:00
c5d406d12f
Fix interrupts not enabled during setup()
2022-12-16 16:46:08 +01:00
eb8ec9f8b9
If an old firmware is detected, make sure the protocol is actually stopped
...
The printer shouldn't continue endlessly asking for a version if an old MMU is detected.
Also if the protocol is supposed to be turned off, it
shouldn't be sending S0 queries.
2022-12-16 16:23:19 +01:00
9f3f0baa47
mmu: Use strncpy when possible
...
Since tmp is always null-terminated we can save some time compared to a
memcpy call.
2022-12-16 16:21:59 +01:00
b3b9778341
mmu: Silence repeated S0 requests
...
Update "S0" CRC on replies so that the message is properly silenced.
2022-12-16 16:21:59 +01:00
78cf51274f
mmu: Embed the newline in MMU2_ECHO_MSG/MMU2_ERROR_MSG
...
This allows to redefine both macros to silence debugging messages, since
we can't redefine the base SERIAL_ECHO.
2022-12-16 16:21:59 +01:00
5f2f6dde13
array<>::size should return constexpr expression
...
This allows to size buffers at compile time (matches c++11 behavior).
2022-12-16 16:21:59 +01:00
2e7c237a17
Cleanup: remove automatic parameter from unload_filament()
...
In M600 and M702, the Z-lift is taken care of outside this function
so it makes no sense to have a Z-lift within unload_filament()
Only exception to this is in the wizard, there I moved the Z-lift to
happen before we start heating the nozzle.
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2022-12-16 16:20:09 +01:00
090c72367d
Minor Fix for PR2235
...
Shorten message to c=12 as some translation of `Yes/No` are 4 chars long
2022-12-16 16:10:15 +01:00
d43a7da20d
fix watchdog not getting disabled on user app boot
2022-12-16 16:01:29 +01:00
74545e2133
Fix `µ` character shown on translations
2022-12-16 15:59:37 +01:00
c05ac535be
TM: reset fan measuring state when changing speed
...
Ensure that fan checks are reset and use the new speed at each step of
the calibration.
This also gives extra time to the fan to ramp-up from a cold start,
when a fancheck could previously start right *after* the speed change.
Should fix #3791
2022-12-16 15:30:30 +01:00
Alex Voinea
Guðni Már Gilbert
Yuri D'Elia
3d-gussner
Alex Voinea