adf2ecabc1
Fix pause indicator when print job timer is not used
...
Fixes #4554
Change in memory:
Flash: +50 bytes
SRAM: +1 byte
2024-01-11 19:30:30 +00:00
8d50d29776
Merge pull request #4553 from sarusani/shutdownHostLCDEntry
...
Add Shutdown host to LCD Menu
2024-01-11 07:33:16 +01:00
f18fc2bbce
Fix Pause->Tune->Auto Home layer shift
2024-01-09 11:07:29 +01:00
59093107fd
Add #ifdef HOST_SHUTDOWN
2024-01-06 00:45:06 +01:00
49f9d7abdc
Add Shutdown host to LCD Menu
...
Add "Shutdown host" entry to LCD menu if printer is not active and host is connected.
2024-01-06 00:45:06 +01:00
db044163f9
Unify Selftest messages
2024-01-04 11:18:07 +01:00
9bd043c83b
Move restore_file_from_sd out of power panic file
...
This function is not specific to power panic. Some printer models
do not have power panic enabled.
This change fixes a build failure
No change in memory
2023-12-30 12:19:51 +00:00
ceec54f026
reprint: reduce duplicate code
...
restore_file_from_sd function now supports any
filename extension. If a print was finished (to allow reprinting) then the
EEPROM filename and extension should always be valid.
Change in memory:
Flash: -312 bytes
SRAM: 0 bytes
2023-12-30 12:06:46 +00:00
15a3fb998c
Merge pull request #4541 from sarusani/actionReadyOpt
...
Remove leading M118 from "action:ready" & "action:not_ready"
2023-12-19 15:02:09 +01:00
2c4474b1dd
Remove leading "M118"
2023-12-16 12:51:17 +01:00
e5d6d72d23
Add #ifdef
2023-12-15 14:09:46 +01:00
1407f29362
Prevent oozing after filament load
...
Retract 10mm of filament after loading
2023-12-14 14:20:46 +01:00
18daa5a62e
Merge pull request #2423 from Panayiotis-git/MK3_M600_Issue-2415
...
LCD option to unload new filament on M600 (issue #2415 )
2023-12-04 17:03:38 +01:00
60e311d74f
Change reprint MENU_ITEM_SUBMENU_P to MENU_ITEM_FUNCTION_P
...
There's no submenu -> don't show arrow
2023-12-03 08:46:48 +01:00
4d9e084cf7
Rename lcd_reprint_usb_print to lcd_send_action_start
...
Sending action start can not only be used for reprints
2023-12-03 08:44:54 +01:00
d267140ee6
Rename reprint_from_eeprom to lcd_reprint_from_eeprom
...
It sets the lcd_return_to_status() at the end, so naming should be consistent witch the other functions
2023-12-03 08:43:16 +01:00
3da4407e4f
Repeat the M600 unload/load filament sequence - Fix translations
2023-12-01 21:13:24 +02:00
8ceda27cda
Provide option to repeat the M600 unload/load filament sequence
2023-12-01 21:12:31 +02:00
4dfc484265
Merge pull request #4207 from gudnimg/crashdet_cancel-fixup
...
`crashdet_cancel()` doesnt cleanup all variables when USB printing
2023-12-01 17:41:33 +01:00
096a1c9fe0
Change Reprint action message to comply to OctoPrint actions
2023-11-30 15:08:48 +01:00
d9d42a0678
Use of PrinterState for Reprint menu
2023-11-23 06:47:04 +01:00
e1e0b0afa1
Refactor code which resets crash detection setting
...
Add function crashdet_use_eeprom_setting
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2023-11-22 21:19:43 +00:00
30d0da4698
Close SD file in print_stop instead of UnconditionalStop()
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-11-22 21:19:17 +00:00
0b4af3b97f
Fix: Reprint menu does not appear during the heating
2023-11-22 12:20:13 +01:00
73436e9351
Fixed Reprint from USB and from SD, some debug is needed
2023-11-22 12:20:00 +01:00
7130504fcf
Apply the reprint_pr_changes_diff2.txt provided by @3d-gussner
2023-11-22 12:18:59 +01:00
ce135a0976
Added support for reprint and streamed GCODE
2023-11-22 12:14:08 +01:00
532a5b3e2f
- Serial message --> /// action:reprint done
...
- Yes/no question --> Need to fix the bug related with the filename print --> if (lcd_show_fullscreen_message_yes_no_and_wait_P(altfilename, false, LCD_LEFT_BUTTON_CHOICE)==LCD_LEFT_BUTTON_CHOICE)
2023-11-22 12:14:00 +01:00
004169034a
Remove some MYSERIAL calls
2023-11-22 12:13:24 +01:00
ae5fbce6e7
Remove MYSERIAL.println code (debug purpose) and old commented code
2023-11-22 12:13:16 +01:00
a52d5430aa
Change to enquecommandf_P and enquecommand_P
2023-11-22 12:13:01 +01:00
e8a2d4c7e1
Reprint function integrated on 3.13v
2023-11-22 12:11:39 +01:00
02459edcb6
Rebase fix
...
Add documentation
Whitespace
2023-11-22 08:21:52 +01:00
af79ac0714
Add `SetPrinterState(PrinterState::Idle);` after `lcd_commands_type = LcdCommands::Idle;`
2023-11-22 07:58:17 +01:00
d5d77ee243
Cleanup documentation
2023-11-22 07:58:17 +01:00
880d2f28bd
LCD menu only sends `// action:ready` or `// action:not_ready` via serial
...
Host has to send back state with `M72 S1|0` to keep printer and host in sync
Changed LCD menu messages to `Set ready` and `Set not ready`
Updated translations
2023-11-22 07:58:17 +01:00
516ae1b952
Update state
2023-11-22 07:58:17 +01:00
d3b98f30a7
Show Set Ready LCD menu only when M79 timer is running.
2023-11-22 07:58:17 +01:00
514607318e
Add printer_state.cpp/.h
2023-11-22 07:58:17 +01:00
d276695ce7
Set Ready
2023-11-22 07:58:13 +01:00
60cb089e96
Show statistics menu for USB/Serial prints
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
331ceaf044
M77: Save statistics when timer is stopped
...
For remote hosts, when the timer is stopped, then also save the statistics.
Slightly refactored save_statistics function by removing the parameters.
The function parameters are always the same.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
423f98ff6e
Implement Marlin's print job timer
...
I changed the code a bit so it would compile
in Prusa Firmware.
The paused duration is no longer included in the
print time statistics.
Change in memory:
Flash: -122 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
9fd478c9c2
Merge pull request #4173 from gudnimg/disable-heaters-gudni
...
optimisation: use `disable_heater()` in more places
2023-11-20 07:01:05 +01:00
4922bcd7b1
Merge pull request #4408 from gudnimg/PR2390
...
PFW-1097 M600: Fix filament change behavior when print is paused
2023-11-16 07:37:42 +00:00
400722ec67
Merge pull request #4461 from gudnimg/lcd-opt-message
...
optimisation: simplify two LCD messages
2023-11-16 07:37:09 +00:00
e74abb102a
Merge pull request #4494 from gudnimg/issue3122
...
Fix #3122
2023-11-12 17:42:10 +01:00
1e6460c344
Merge pull request #4479 from gudnimg/PFW-1523-2
...
PFW-1523 Add the `S` parameter to `M79`
2023-11-12 16:19:31 +00:00
ddbadf4874
Fix #3122
...
If the feedrate multiplier is changed while the print is paused
update the saved feedrate multiplier in RAM
2023-11-12 12:38:05 +00:00
4e6b649865
PFW-1523 Only overwrite name if not SD printing
2023-11-11 16:56:14 +00:00
gudnimg
3d-gussner
sarusani
Panayiotis-git
Juan Francisco Estrada