josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,422 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

21 Commits

Author SHA1 Message Date
Guðni Már Gilbert 355b670cd4 Remove SWSPI which is not used/implemented 2022-12-20 10:10:45 +01:00
Yuri D'Elia 1d3ee1caba build: Add Configuration_var.h as a configuration wrapper 
Instead of including Configuration_prusa.h directly, include
Configuration_var which then includes the proper variant file though a
preprocessor macro.

This allows to keep the existing build system intact, but also redefine
at compile time the final header without having to make copies on the
file system.
 2022-10-05 01:26:26 +02:00
Alex Voinea c46b97ec2d Add base code for PAT9125_sensor 2022-09-16 10:17:04 +02:00
Alex Voinea ce0d8f2f12 Correct sensor orientation for old pat9125 init 2022-09-16 10:06:26 +02:00
Alex Voinea 28c527fece Use _check instead of register read for probe() 2022-09-16 10:06:26 +02:00
Alex Voinea 8b9bb23652 Unflip the hardcoded flip of the Y axis 2022-09-16 10:06:26 +02:00
Alex Voinea f4dbf424e4 Use PAT9125 new init sequence 2022-09-16 10:06:26 +02:00
Alex Voinea 6351d29d70 TWI timeout 2022-02-17 00:05:09 +01:00
Robert Pelnar b35a212d15 PAT9125 optimalization (rewrited to C, 8bit sampling) 2018-07-12 18:11:07 +02:00
Robert Pelnar 410e911364 SWI2C for PAT9125 simplified/optimized 2018-07-12 17:55:38 +02:00
Robert Pelnar 8da2330b93 FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW). 
ultralcd_implementation_hitachi - fixed link
 2018-04-11 16:03:54 +02:00
bubnikv 44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
Robert Pelnar a56b0ccaf8 bugfix - Filament sensor enable from menu 2017-11-29 00:15:45 +01:00
Robert Pelnar cddb0eafb8 PAT9125 - sampled only Y value, new debug code D9125. 
FSensor - synchronous sampling and new algorithm
build number = 103
 2017-10-24 19:45:15 +02:00
Robert Pelnar 8734961e0e M114 now reports also actual extruder position, 
PAT9125 HWI2C (Wire) support,
fsensor implementation into separate file
build number = 102
 2017-10-22 22:42:45 +02:00
Robert Pelnar 683784c4c7 PAT9125 I2C, hardware SG homing 
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
 2017-08-17 15:23:34 +02:00
Robert Pelnar cd48d5b4ff TMC2130 stallguard SW homing improvement - steps delta instead of delay (loop count), new function tmc2130_home_restart, always enable endstops durring homing. 2017-07-12 17:36:50 +02:00
Robert Pelnar ec7678a25f pat9125 filament sensor 
sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)
 2017-07-07 04:45:09 +02:00
Robert Pelnar f6a8e1df9d TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes 
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
 2017-07-01 12:39:16 +02:00
michalprusa fd2a1f1df4 Resolution setting fixed 2017-06-17 20:54:59 +02:00
michalprusa 6f3c28c4a7 Filament sensor PAT9125 implemented 2017-06-17 20:40:22 +02:00