eb8ec9f8b9
If an old firmware is detected, make sure the protocol is actually stopped
...
The printer shouldn't continue endlessly asking for a version if an old MMU is detected.
Also if the protocol is supposed to be turned off, it
shouldn't be sending S0 queries.
2022-12-16 16:23:19 +01:00
9f3f0baa47
mmu: Use strncpy when possible
...
Since tmp is always null-terminated we can save some time compared to a
memcpy call.
2022-12-16 16:21:59 +01:00
b3b9778341
mmu: Silence repeated S0 requests
...
Update "S0" CRC on replies so that the message is properly silenced.
2022-12-16 16:21:59 +01:00
78cf51274f
mmu: Embed the newline in MMU2_ECHO_MSG/MMU2_ERROR_MSG
...
This allows to redefine both macros to silence debugging messages, since
we can't redefine the base SERIAL_ECHO.
2022-12-16 16:21:59 +01:00
5f2f6dde13
array<>::size should return constexpr expression
...
This allows to size buffers at compile time (matches c++11 behavior).
2022-12-16 16:21:59 +01:00
2e7c237a17
Cleanup: remove automatic parameter from unload_filament()
...
In M600 and M702, the Z-lift is taken care of outside this function
so it makes no sense to have a Z-lift within unload_filament()
Only exception to this is in the wizard, there I moved the Z-lift to
happen before we start heating the nozzle.
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2022-12-16 16:20:09 +01:00
090c72367d
Minor Fix for PR2235
...
Shorten message to c=12 as some translation of `Yes/No` are 4 chars long
2022-12-16 16:10:15 +01:00
74545e2133
Fix `µ` character shown on translations
2022-12-16 15:59:37 +01:00
c05ac535be
TM: reset fan measuring state when changing speed
...
Ensure that fan checks are reset and use the new speed at each step of
the calibration.
This also gives extra time to the fan to ramp-up from a cold start,
when a fancheck could previously start right *after* the speed change.
Should fix #3791
2022-12-16 15:30:30 +01:00
4d87f65b68
Merge pull request #3443 from gudnimg/m109-turn-off-fan
...
Turn off print fan while resuming print from RAM
2022-12-12 15:20:20 +01:00
d84e497007
Merge pull request #3805 from 3d-gussner/MK3_Fix_M862.4_strict
...
MK3: Fix `M862.4` with [strict] mode
2022-12-12 12:38:15 +01:00
613ea290f5
Add a comment
2022-12-10 10:04:17 +00:00
9ed46df97f
Don't show full screen message meant for single color setup
...
load_filament_to_nozzle will show a more precise full screen message when an MMU is used.
2022-12-10 10:00:58 +00:00
70451b6bd3
Turn off print fan while restoring print from RAM
2022-12-10 09:53:43 +00:00
40cc6dcb6d
Merge pull request #3783 from leptun/enable_PRUSA_SN_all_variants
...
Allow "PRUSA SN" to print the SN in eeprom on all variants
2022-12-09 14:51:57 +01:00
1e39012953
Merge pull request #3793 from gudnimg/PFW-1453
...
PFW-1453 Stop Print: Don't unload if FINDA is not triggered
2022-12-09 12:54:16 +00:00
68c5cdce1c
Merge pull request #3780 from gudnimg/stop-print-optimisations
...
optimisation: Improve Stop Print menu
2022-12-08 19:41:52 +01:00
92f2281b1a
Merge pull request #2335 from Panayiotis-git/MK3_NoBedHeating_onLoadUnload
...
@Panayiotis-git Thanks a lot!
Finally after 3 years 21 days your PR gets merged 🦕
2022-12-08 18:45:12 +01:00
0cedb92ac6
Simplify firmware/gcode version comparisons
2022-12-07 18:59:29 +01:00
96e4881da5
Merge pull request #3794 from gudnimg/fix-m862-q
...
Fix undefined pointer in `M862.2 Q` and `M862.3 Q`
2022-12-07 13:04:45 +01:00
6f5a67491c
Fix `M862.4` with [strict] mode
...
Max 8 falvor versions
2022-12-06 13:18:52 +01:00
1c9a3a6b25
Add Nozzle change menu to FARM mode under Settings
2022-12-05 18:22:18 +01:00
a8fe71df8c
PFW-1453 Stop Print: Don't unload if FINDA is not triggered
2022-12-05 16:45:57 +01:00
52965bd05d
Avoid using global variables
...
Flash: -68B
RAM: -4B
2022-12-05 16:43:51 +01:00
4c27d057b8
Don't inline fSetMmuMode
...
Saves 8 bytes of flash
2022-12-05 16:43:51 +01:00
074b62361f
Fix #3788
...
fSetMmuMode needs to be called
in order for the commands to work:
M862.2 Q
M862.3 Q
2022-12-05 16:43:51 +01:00
c75c81ce4f
Do not heat the bed, on load/unload
...
If during a paused print, the preheat is canceled, keep the bed target temperature
Display bed temperatures only if bed is also heated
Remove not needed variables nTargetOld and nTargetBedOld from the mFilamentItem function
Define new Setting "HeatBedOnLoad" [Yes/No]
2022-12-04 19:26:34 +02:00
fb530ce543
PFW-1454 Send button to MMU on MMU SELFTEST FAILED screen
...
Fixes an issue where the button on the MMU error screen doesn't do anything
when MMU SELFTEST FAILED is rendered
2022-12-04 11:04:00 +00:00
6d62fb0d65
Merge pull request #3784 from DRracer/opt01
...
Optimize rendering MMU Error sensor line
2022-12-02 17:12:05 +00:00
3e976e04ca
Merge pull request #3777 from 3d-gussner/PFW-1431
...
PFW-1431: Add "PA Preheat"
2022-12-02 13:34:18 +01:00
54ef2a6c28
Merge pull request #3769 from 3d-gussner/MK3_Temp_model_cal_wizard
...
PFW-1434: MK3 Temp model calibration during wizard
2022-11-30 15:33:38 +01:00
1bbcdb0c0d
Merge pull request #3774 from 3d-gussner/MK3_Nozzle_change
...
PFW-1435 Nozzle change menu
2022-11-30 15:32:18 +01:00
0a6388cc56
Update internal translations
...
Fix G28 W
2022-11-30 15:01:24 +01:00
500131d51d
fullscreen message: use \n to force the next word on the next line
...
Useful for printing short URLs since those contain punctuation characters, which get treated at the end of a word under usual circumstances
2022-11-30 10:17:28 +01:00
8f44d1102c
Add PA preheat menu
2022-11-30 06:42:32 +01:00
23613c7eb1
optimisation: Stop print menu
...
There is no need to manually track the cursor position.
We can use the menu API:
MENU_BEGIN()
...
// menu items in between here
...
MENU_END()
Change in memory:
Flash: -116 bytes
SRAM: 0 bytes
2022-11-26 10:18:47 +00:00
a666c0f6f4
Optimize rendering MMU Error sensor line
...
CPUFLASH: -32B
2022-11-25 13:30:53 +01:00
83c9e946e4
Fix recursion
2022-11-24 16:15:51 +01:00
4f3c188017
Update internal translations
...
Fix typo
2022-11-24 10:53:04 +01:00
fea1520dfb
Fix & optimize FW version parsing and checking
...
PFW-1433
2022-11-23 13:34:13 +01:00
32673e1681
Nozzle change menu
2022-11-23 11:39:26 +01:00
2cd42f8433
Fix typo
...
Add Norwegian translations thanks to @OS-kar
2022-11-22 08:26:20 +01:00
c8157919b1
PFW-1440 Fix issue where cooldown timer is not set after a faile retry
2022-11-21 12:54:53 +01:00
37ac33bc32
Fix compiler warning
2022-11-21 12:54:53 +01:00
fe6e3ca2b1
Unload first before retrying
...
Should free the filament if accidentally held by the fsensor.
2022-11-20 19:23:07 +01:00
5639620041
Avoid watchdog while doing VerifyFilamentEnteredPTFE
2022-11-20 17:27:36 +01:00
84d9eee61d
Resume hotend temperature if parked + MMU restarted
...
PFW-1355
2022-11-20 17:27:36 +01:00
01c1f4a8dd
Load test: Monitor unload as well
2022-11-20 17:27:36 +01:00
5c8ea4c90a
fixup
2022-11-20 17:27:36 +01:00
327f0edb17
VerifyFilamentEnteredPTFE must take into account the Extra Loading Distance
2022-11-20 17:27:36 +01:00
Guðni Már Gilbert
Yuri D'Elia
3d-gussner
Yuri D'Elia
Alex Voinea
Panayiotis-git
Jakub Dolezal
D.R.racer