bf6c0919e1
Merge pull request #4166 from gudnimg/gudnimg-patch-1
...
M701/M702: Set default Z value to 0
2023-05-05 12:38:37 +02:00
12d9070c03
Merge pull request #4181 from gudnimg/status-screen-feedrate
...
optimisation: only check feedrate if knob is rotated
2023-05-05 12:37:46 +02:00
fd2184801f
Merge pull request #4168 from gudnimg/next_feedrate_remove
...
Cleanup: Remove `next_feedrate` from global scope
2023-05-05 12:36:04 +02:00
427e88a406
Merge pull request #4175 from gudnimg/remove-LoadFilament
...
cleanup: Remove unused `LcdCommands` state `LoadFilament`
2023-05-05 12:34:49 +02:00
bdd958fe5e
Merge pull request #4157 from leptun/menu_optimizations
...
Menu optimizations
2023-05-05 11:51:12 +02:00
649f08f69f
Merge pull request #4178 from gudnimg/m600-dead-code
...
M600: remove dead code
2023-05-05 11:50:01 +02:00
e3a57c9947
Merge pull request #4169 from 3d-gussner/MK3_TMcal_mid
...
Move nozzle to center during Thermal model cal.
2023-05-05 11:48:41 +02:00
fc15f5a6ef
Select correct MMU slot in lcd_wizard_load
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-05-02 22:38:54 +00:00
9cf1f7871e
Minor fix to M701 when MMU slot is out of range
...
If MMU slot is outside of range, then we rather the printer
not do anything. Currently it would accidentally assume
the MMU is disabled. This may have undesireable results.
No change in memory
2023-05-02 22:32:18 +00:00
5b75886a55
Fix regression where feedrate can overflow on status screen
...
If the remaining print time is more than 10.9 hours at 100%
then increasing the feedrate multiplier
to 101% or more will yield an unrealistic time due to overflow occuring.
Change in memory:
Flash +2 bytes
SRAM: 0 bytes
2023-05-01 12:48:21 +00:00
b3f52f95c7
optimisation: only check feedrate if knob is rotated
...
Guard the feedmultiply code with
lcd_encoder.
if lcd_encoder = 0, then there is no need to check if
feedmultiply should be updated.
Also set lcd_encoder to zero in one line to consume the rotation event.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2023-04-30 23:31:16 +00:00
92e5747469
M600: remove dead code
...
The if statement doesn't do anything useful
so I propose it be removed before 3.13 release
Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
2023-04-29 23:43:27 +00:00
26369ac540
Restore old M701/M702 behavior
...
If the new Z parameter is not given,
assume that the old Z-lift behavior is desired.
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-29 16:22:28 +00:00
0b34c6a695
cleanup: Remove unused LcdCommands state
...
This may help the compiler generate smaller code
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-04-29 10:24:04 +00:00
d7127c44f1
Merge branch 'prusa3d:MK3' into gudnimg-patch-1
2023-04-28 19:10:56 +00:00
e11555392e
Save some bytes.
...
Thanks to @leptun
2023-04-26 09:18:47 +02:00
686f92b243
Move nozzle to center during Thermal model cal.
2023-04-25 20:41:17 +02:00
228250f050
Cleanup: Remove next_feedrate from global scope
...
No change in memory
2023-04-24 21:33:07 +00:00
a354aad762
Merge pull request #4167 from leptun/lcd_encoder_improvements
...
Lcd encoder improvements
2023-04-24 15:58:54 +02:00
e662ef276e
Deduplicate temperature settings
...
Flash: -52B
SRAM: 0B
2023-04-24 11:56:53 +02:00
c83646743f
Deduplicate MMU settings
...
Flash: -58B
SRAM: 0B
2023-04-24 11:56:53 +02:00
4a2a89cb74
Remove stupid comments from older bad code
2023-04-24 11:56:53 +02:00
67f0fe0fce
Remove AUTOTEMP menu items
...
They are commented out and broken anyway
2023-04-24 11:56:53 +02:00
c339711025
Make the encrot table balanced
...
It won't change much. It is not possible to determine in which direction the encoder spun when two steps are made, so just use + or - 2.
2023-04-24 11:56:25 +02:00
32e68c33b4
lcd encoder: use lookup table
...
Also handle the scenario where the encoder moves two steps in a single lcd_buttons_update cycle.
Flash: -46B
SRAM: 0B
2023-04-24 11:56:13 +02:00
ea101f49d4
`lcd_buttons` is actually `lcd_click_trigger`
...
Flash: -4B
SRAM: 0B
2023-04-24 11:56:04 +02:00
dd16cf4525
Remove Binary.h include
2023-04-24 11:52:25 +02:00
78614f5670
M701/M702: Set default Z value to 0
...
Set default Z value to 0 to maintain backwards compatibility with older gcodes.
2023-04-24 09:09:43 +00:00
17e085040c
Add missing line to custom character
...
Shouldn't make a difference since the array is already defined as 8B long, but I just found it weird and surprising when I noticed only 7 lines were defined
2023-04-24 10:44:48 +02:00
548ed0eb31
Convert <binary.h> to native binary literals
2023-04-24 10:42:09 +02:00
5b7266fdf1
Don't render message when printer is idle
...
Guard the lcd_display_message_fullscreen_P call by blocks_queued(). If there are no planned moves, there is no need to render this message, it creates a weird LCD draw noticable by the user.
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-23 12:25:10 +02:00
9de2cbfe8e
Fix an issue with crash_mode_switch toggling
...
Proposed changes
2023-04-23 12:25:10 +02:00
9272545deb
Dead code cleanup
2023-04-23 12:25:10 +02:00
02a0f6a35a
Correctly utilize the menu stack in the Mode select message
...
Flash: -34B
SRAM: 0B
2023-04-23 12:25:10 +02:00
6390b3b69b
Remove duplicate separator string
...
Flash: -14B
SRAM: 0B
2023-04-23 12:25:10 +02:00
62991c8e67
Fix issue where Tx gcode doesnt reset custom_message_type
...
We need to call BeginReport and EndReport
otherwise the SD filename is not shown when printing
This only affects single material MMU gcodes
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-23 09:52:11 +00:00
5778e39687
Resync `lcd_encoder_diff` when clicking
...
Flash: +4B
SRAM: 0B
2023-04-23 10:07:52 +02:00
c037e6dfba
Use atomic block for accessing lcd_encoder_diff
...
There was still the possibility of lcd_encoder_diff being updated from the ISR while the new enc_diff was being computed.
Flash: +8B
SRAM: 0B
2023-04-23 09:58:56 +02:00
1f181a949a
Fix `lcd_encoder_diff` getting out of sync with the knob hard steps
...
Flash: +18B
SRAM: 0B
2023-04-23 09:48:09 +02:00
ee8b95b556
Merge pull request #4158 from gudnimg/remove-dead-code-gudni-e1e2
...
Cleanup: remove unused extruder macros
2023-04-23 09:26:26 +02:00
9662bb11d4
Merge pull request #4144 from gudnimg/double-feedback-bugs
...
Double feedback bugs
2023-04-23 09:14:01 +02:00
3509791943
Drop sound feedback in lcd_v2_calibration
...
Drop the sound feedback in lcd_v2_calibration
when switching to lcd_generic_preheat_menu
If a single filament setup (no MMU) has filament loaded, it will jump
immediately to lcd_generic_preheat_menu
this created double feedback.
Let's just drop the feedback since the transition
between menus is very fast.
Change in memory:
Flash: -8 bytes
2023-04-22 15:28:27 +00:00
b15beb25cc
Remove INVERT_E1_DIR and INVERT_E2_DIR from config
...
I think these should be removed from the configuration files
as these definitions don't do anything.
2023-04-22 15:15:21 +00:00
0cf0d40a2e
Remove checkAllHotends()
2023-04-22 15:15:21 +00:00
c7f0ee13be
Missed these macros disable_e1/2
2023-04-22 15:15:21 +00:00
25522d3d68
Remove unused Autofan extruder configs
2023-04-22 15:15:21 +00:00
c14332bfb2
Combine two ifdefs
2023-04-22 15:15:21 +00:00
327b5b230b
Remove soft_pwm_1 and soft_pwm_2
2023-04-22 15:15:21 +00:00
fcabcd2804
Remove TEMP_SENSOR_1 and TEMP_SENSOR_2
...
Hopefully I didn't miss anything
2023-04-22 15:15:21 +00:00
f539b40611
Remove more EXTRUDERS > 1 code
2023-04-22 15:15:21 +00:00
4935191335
Cleanup remove unused macros
...
enable_e1
enable_e2
disable_e1
disable_e2
The firmware doesn't support multiple extruders
No change in memory
2023-04-22 15:15:21 +00:00
7889d54cfd
Merge pull request #4160 from gudnimg/cleanup-tcode-description
...
Rewrite the Tcodes description
2023-04-22 14:43:33 +00:00
76a76de7ea
Rewrite the Tcodes description
...
The old description had typos and was a bit confusing for new users
The new text is a suggestion from David Buzek at Prusa Research
2023-04-22 14:27:01 +00:00
51da6065c8
Merge pull request #4159 from gudnimg/cleanup-gudni-comments
...
Remove random `//-//` comments
2023-04-22 13:53:13 +00:00
b8f8348e77
Fix double feedback in Z-offset menu
2023-04-22 15:53:06 +02:00
b6e228d5a5
Fix double feedback in First Layer Calibration
...
For MMU users: This happens when the user
selects a filament to load from 1 to 5
For non-MMU: this happens when clicking
the knob within 2 seconds.
Additionally fixed the code indendation
it was a mix of spaces and tabs
2023-04-22 15:53:06 +02:00
ccabf1fa31
Remove random //-// comments
2023-04-22 13:39:08 +00:00
e516d8a0c4
Merge pull request #4156 from leptun/lcd_status_screen_block
...
Fix `M0` click not consumed
2023-04-22 15:01:16 +02:00
4ce3fa53a1
Optimise M0/M1 code size
...
Replace two bool variables with one.
It's not obvious but (!hasP && !hasS) is equal to
!(hasP || hasS)
Note: expiration_time_set = hasP || hasS
Truth table:
|--------------------------------------------------|
| hasP| hasS| (!hasP && !hasS)| !(hasP || hasS) |
|------|-----|--------------------|-----------------|
| 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 0 |
| 1 | 0 | 0 | 0 |
| 1 | 1 | 0 | 0 |
|--------------------------------------------------|
Change in memory:
Flash: -36 bytes
SRAM: 0 bytes
2023-04-21 17:42:55 +00:00
360f234b98
Merge pull request #4146 from gudnimg/fan-check-opt
...
Reduce code size in fan check selftest
2023-04-21 14:24:04 +02:00
91b913e997
Fix `M0` click not consumed
...
Fix the need to click the knob twice to dismiss `M0`.
Flash: -54B
SRAM: -2B
2023-04-21 12:59:40 +02:00
2ad916a2c3
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
18c389543b
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
20e73e3c4f
Merge pull request #4067 from scottmudge/MK3_3.12-meatpack-pr
...
Add support for g-code compression/packing over serial connection (MeatPack)
2023-04-19 09:20:07 +02:00
2dcaae80d5
Merge pull request #4027 from gudnimg/minor-optimisation-gudni
...
Many minor optimisations for 3.13/3.14
2023-04-17 21:27:48 +02:00
ea97ca7920
Use `EXTRUDERS` instead of hardcoded value in string
2023-04-17 21:12:59 +02:00
b67063f14a
Remove empty lines
2023-04-17 21:10:20 +02:00
43d41ddd2b
cleanup: static variables in Marlin_main.cpp
2023-04-16 23:23:31 +00:00
4b54cd1f30
Remove unused LoadingToNozzleRAII
...
The variable is not used anywhere.
Change in memory:
Flash: -14 bytes
SRAM: -1 byte
2023-04-16 17:23:28 +00:00
01df65882f
cleanup: remove commented code
2023-04-16 15:25:43 +00:00
f6135f2ed1
Enable Analog IR sensor again
2023-04-16 13:58:18 +00:00
f5b9d2ac2e
cleanup: Remove unused Developer define
2023-04-16 13:13:16 +00:00
2ed4a75894
cleanup: remove unused settings
2023-04-16 13:13:16 +00:00
559e1bb21a
Remove unused MMU configs
...
- MMU_IDLER_SENSOR_ATTEMPTS_NR
- MMU_REQUIRED_FW_BUILDNR
These are no longer used
2023-04-16 13:13:16 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
dea7f2b26c
Resolve PR review
...
Initialise EEPROM_CHECK_MODE always
But if farm mode is detected, update the Check mode to Strict
Initialise EEPROM_NOZZLE_DIAMETER on farm mode.
When opening the menus this value is set automatically to
_Diameter_400 anyway so this should be fine.
No change in memory on Multilang build
2023-04-15 13:45:10 +00:00
9f66eceb29
optimisation: belt test new values
...
use lcd_print instead of lcd_printf_P
to print the number only
Tested on MK3S+
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
87e40f1cee
optimisation: lcd_putc_at in belt test
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
b67c359129
Move fan_state to fancheck.cpp and make it static
...
No change in memory
2023-04-15 13:45:10 +00:00
ebdcfbec50
cleanup: tmc2130: make variables static where applicable
...
No change in memory
2023-04-15 13:45:10 +00:00
7c23d8b00c
cleanup: make cancel_heatup static in Marlin_main
2023-04-15 13:45:10 +00:00
d148c08991
Remove dead code from get_coordinates()
2023-04-15 13:45:10 +00:00
c7de1b1416
optimize get_coordinates() axis mask
2023-04-15 13:45:10 +00:00
ea7b395852
Remove useless parantheses
...
Found these a few months ago when I was trying some other optimization. Don't want to make a PR just for this, so I'll just slide it here in this existing PR.
2023-04-15 13:45:09 +00:00
d175dba669
optimisation: use expired_cont is specific places
...
!variable.running() || variable.expired()
is equal to
variable.expired_cont()
The latter required less flash memory
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
00ffab8f62
optimisation: combine if statements in Sensors menu
...
FINDA status is always 0 or 1
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
7ff514621c
cleanup: remove unused global variable
2023-04-15 13:45:09 +00:00
69b4696114
use lcd_puts_P instead of lcd_printf_P
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
66bb9bcfe4
optimisation: lcd_temp_cal_show_result
...
result is boolean so always update the EEPROM
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
bd796a2cb3
optimisation: more lcd_putc_at
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
70dadc4202
M115: Extruder count is always 1
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
62cbc829f6
optimisation: use new eeprom methods in check_printer_version()
...
Change in memory:
Flash: -48 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
cd8a22d6b3
optimisation: utils: don't initialise global variables
...
They will be set by fCheckModeInit() by reading from EEPROM
Change in memory:
Flash: -2 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
7a8dfdae53
optimisation: use new EEPROM init method for fCheckModeInit
...
Change in memory:
Flash: -90 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
6aafbe69a8
cleanup: remove unused function declaration
2023-04-15 13:45:09 +00:00
6e02a082e2
cleanup: make heating_status_counter static
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
ab934f8ba5
optimisation: make clock_interval static and 1 byte
...
Change in memory:
Flash: -16 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
66e629ba74
cleanup: remove unused variable FSensorStateMenu
2023-04-15 13:45:09 +00:00
3cd97a5e8f
optimsation: draw cursor and set position with one function
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
3d-gussner
Guðni Már Gilbert
Alex Voinea