caf98936e3
Minor cleanup
2022-09-16 10:22:38 +02:00
b9c23cd6b8
Add Unloading message to LCD
...
Also made mmu_M600_load_filament static to limit its scope
2022-09-16 10:22:38 +02:00
d5cdb412ba
Introduce a way to read the previous tool used
2022-09-16 10:22:38 +02:00
2d02877686
Disable automatic in M600
2022-09-16 10:22:38 +02:00
e39bc3f12d
During Tx, temporarily allow cold extrusion
...
This prevents a FSENSOR DIDNT TRIGGER error
and allows the bondtech gears to grab the filament.
2022-09-16 10:22:38 +02:00
45a5e719a2
Disable filRunout when MMU.Enabled()
...
It turned out the runout is caused by the ramming sequence in the G-code, which is interpreted before the actual MMU command gets into processing.
The frequency of these errors/runouts differed one machine from another and was really hard to track down.
Therefore - once the MMU is enabled (active and running) we'll disable filament runout handling caused by the printer's filament sensor.
2022-09-16 10:22:38 +02:00
a1881b4a07
Disable filament runout when MMU is unloading
2022-09-16 10:22:38 +02:00
762080ab1a
Fix some partking and recovery bugs
2022-09-16 10:22:38 +02:00
8b6941d493
Temporarily disable runout
...
There are still printers which suffer from spurious runouts for no reason.
For testing purposes, runout will be disabled until the real cause is found.
2022-09-16 10:22:38 +02:00
01f926f074
Fix build MK25S
2022-09-16 10:22:38 +02:00
f155c7664d
Add missing CheckUserInput calls, fix bad array entry for FW_update
2022-09-16 10:22:38 +02:00
e8088b0161
Allow reset if the EEPROM is set to "on"
2022-09-16 10:22:38 +02:00
888a37450b
Fix wrong return
2022-09-16 10:22:38 +02:00
73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
204b43dce4
PFW-1336
...
The following situation is now fixed, steps:
1. Load filament through LCD
2. Load to nozzle through LCD
3. Before filament reaches Fsensor => turn off the printer
4. Wait a few seconds and then turn the printer on again
5. Start a print through the SD card
6. Printer will unload and then re-load the filament
Previously in step 6, the printer would start a print without any
filament loaded.
2022-09-16 10:22:38 +02:00
46184a9447
Update printer name if M862.3 is called but not M862.2
2022-09-16 10:22:38 +02:00
236098dbca
Make init MMU error screens send buttons (Idle mode)
2022-09-16 10:22:38 +02:00
b880559ba7
Reset MMU upon start + fix reporting its start errors
2022-09-16 10:22:38 +02:00
1ff7459743
Re-enable filament runout + add debug msgs
...
Needs a fix on the MMU side (report FeedToBondtech::DisengageIdler)
2022-09-16 10:22:38 +02:00
b6b265e371
Hack around old MMU FW's msgs
2022-09-16 10:22:38 +02:00
c1134e7e68
Cleanup: Remove an old comment
2022-09-16 10:22:38 +02:00
bd932b3b10
Cleanup: Fix two compiler warnings
2022-09-16 10:22:38 +02:00
cfc56af95c
Cleanup: fix parameter comments
2022-09-16 10:22:38 +02:00
268c96334b
Cleanup: Pull out PrusaErrorCodeIndex
...
Saves 8 bytes of flash
2022-09-16 10:22:38 +02:00
d49e858cf7
PFW-1323 Fix MMU error screen doesn't disappear when error resolved on the MMU
2022-09-16 10:22:38 +02:00
7b91e73c8b
Fix issue where error screen updates too slowly in manage_response
2022-09-16 10:22:38 +02:00
98d07e6a09
Call lcd_set_custom_characters_nextpage
2022-09-16 10:22:38 +02:00
5ced30d8ca
Cleanup: Add comments and reduce code size slightly
2022-09-16 10:22:38 +02:00
352a22c22e
Cleanup: Remove unused callback
...
Remove unused callback in lcd_show_multiscreen_message_with_choices_and_wait_P
2022-09-16 10:22:38 +02:00
ecb4d08049
PFW-1318 Rewrite the implementation to be non-blocking
2022-09-16 10:22:38 +02:00
dc87bbae11
Fix compile error
2022-09-16 10:22:38 +02:00
0e75a03c8c
Reuse FSensor runout blocking impl. throughout the whole FW
2022-09-16 10:22:38 +02:00
eed816d9de
Fix build
2022-09-16 10:22:38 +02:00
d7270e0b80
Fix lang build
2022-09-16 10:22:38 +02:00
f04d83fc4c
Update printer's type (MMU/non-MMU) at runtime
...
+ reformat utils.cpp
2022-09-16 10:22:38 +02:00
5082da78d2
Convert button on LCD into button for MMU
...
- Dependent on current MMU error being processed
- Includes rename of LEFT_BUTTON_CHOICE -> LCD_LEFT_BUTTON_CHOICE (and right, middle as well) to avoid confusion with MMU buttons' ordering
2022-09-16 10:22:38 +02:00
a0e9a302b8
Suppress communication drop-out < 8s (MMU in bootloader)
...
PFW-1327
2022-09-16 10:22:38 +02:00
ba8332cd3e
Fix MK25 build
2022-09-16 10:22:38 +02:00
d628525a94
Fix build MK25S
2022-09-16 10:22:38 +02:00
f3f2086f29
Fix compilation MK3
2022-09-16 10:22:38 +02:00
0bd3dfdcf7
This starts to print ;)
...
Temporarily disabled filament runout as this breaks ToolChange operation
yet for unknown reason.
2022-09-16 10:22:38 +02:00
456ddbb538
Handle the new MMU states (slow load to fsensor)
2022-09-16 10:22:38 +02:00
5f9ca6a6f3
Reorder errors list according to Prusa-Error-Codes #61
2022-09-16 10:22:37 +02:00
8a92865969
Update MK3S to match MMU PR#168
...
- new progress and error codes
- remove #error from mmu2_power.cpp as it makes no sense
- remove temporary error translation code
2022-09-16 10:22:37 +02:00
33650c6e56
Remove redundant call to lcd_update_enable
2022-09-16 10:22:37 +02:00
f1803357b0
Fix default selection after changes in PFW-1312
...
The Yes and No are reverted. Before PFW-132 Yes is 1 and No is 0
Now they are Yes is 0, and No is 1
2022-09-16 10:22:37 +02:00
45edc69cc4
Add back menu it confirm if extrusion has correct color after loading to nozzle via LCD
...
I've added the call to this message via the menu function to ensure it
only appears when interacting with the LCD
2022-09-16 10:22:37 +02:00
1c26875e0e
PFW-1318 Implement callback to render status line
...
To render the thermometer and degree symbols
the CGRAM table will instead swap out
the feedrate and clock symbol when
lcd_set_custom_characters_nextpage()
is called.
2022-09-16 10:22:37 +02:00
452f39dc4b
fixup
2022-09-16 10:22:37 +02:00
3b0fba14ac
Remove unused parameter nlines to simplify things
...
This allows us to remove one overload
of lcd_display_message_fullscreen_P
2022-09-16 10:22:37 +02:00
Guðni Már Gilbert
D.R.racer
VintagePC